V6 Camaro Performance Upgrades - Page 28 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

gahammerle · 11-02-2017, 02:41 PM

Quote:

Originally Posted by RavenAngel

On DYNO my V6 is pushing almost 350 RWHP.

What was it at before the tune?

RavenAngel · 11-02-2017, 04:08 PM

About 305 hp range

officerrob1ls · 11-06-2017, 04:38 PM

Hey guys new to the forum and seen a lot of good advice on here was just wondering if anybody knows a good mechanic in or around central Florida that works on the 2014 lfx motor for my v6 Camaro want to boost the hp/tq a bit higher plus install new clutch and rear gears any advice will be helpful

calflan · 05-19-2018, 10:59 PM

Raven,
Where are you located in Oklahoma? I'm in Dallas and looking for a good tune for my V6. Yours boosted your car 45 HP? Hard to believe, but not the first time I've heard a tune makes big difference.
I have combo of add ons, but would like to get a tune to see what that does for me as well. I have axle back exhaust, Intake spacer, VMAX throttle body, KN CAI, catch can and plenum spacer. Wondering a couple things if anyone cares to chime in; 1 - what will shorty headers dor for HP and 2 - what will a catback exhaust do HP wise?
I think given what I have now, I'm pushing possibly 330 HP, perhaps with a tune and deeper exhaust mods, I'll perhaps push 360?
Thanks

Lil' Nasty · 05-20-2018, 01:25 PM

Quote:

Originally Posted by calflan

Raven,
Where are you located in Oklahoma? I'm in Dallas and looking for a good tune for my V6. Yours boosted your car 45 HP? Hard to believe, but not the first time I've heard a tune makes big difference.
I have combo of add ons, but would like to get a tune to see what that does for me as well. I have axle back exhaust, Intake spacer, VMAX throttle body, KN CAI, catch can and plenum spacer. Wondering a couple things if anyone cares to chime in; 1 - what will shorty headers dor for HP and 2 - what will a catback exhaust do HP wise?
I think given what I have now, I'm pushing possibly 330 HP, perhaps with a tune and deeper exhaust mods, I'll perhaps push 360?
Thanks

Yeah i dont believe it. When I added my SC my dyno was 370 rwhp and 330rwtq. Unless there is a power adder or proof, then i doubt that's a realistic number.

Anyways, get yourself an Hptuners suite and I would recommend Ivan @ southwest speed to tune your LLT. He is tuning my Booted LLT and its great.

Cambo · 09-19-2019, 08:41 AM

Is a plenum spacer different than an intake manifold spacer? I'd like this (these) to be my next mod(s) since it seems like a lot of bang for the buck. Sorry if someone already asked this.

farm rat · 09-19-2019, 10:29 AM

Plenum is on top of the intake and manifold spacer (Isolator) is between the manifold and block. You get more bang for your buck with the isolator.

spyderbuddy · 09-19-2019, 11:35 AM

I don't believe 350Hp without bottle or supercharged
I only had 270Hp with my additions

rtcat600man · 09-19-2019, 06:52 PM

Quote:

Originally Posted by spyderbuddy

I don't believe 350Hp without bottle or supercharged
I only had 270Hp with my additions

That would be correct. 270 HP is a RWHP with all bolt ons.

I was dynoed at around 265 RWHP and I have every bolt on possible expect the pulley change.

I figure that is close to 350 at the engine give or take a few.

At that point who cares, I ran a 13.6 in the 1/4 and I handle like I am on rails.

Got over 120K miles and people think it look brand new.

Amazing when you take care of your stuff things will last and look good.

rtcat600man · 09-19-2019, 06:53 PM

Quote:

Originally Posted by Cambo

Is a plenum spacer different than an intake manifold spacer? I'd like this (these) to be my next mod(s) since it seems like a lot of bang for the buck. Sorry if someone already asked this.

Yes, the plenum spacer is on top and not worth much, but if you want to have every bolt on item, you need to add this one too.

11-02-2017, 04:08 PM	#380
RavenAngel Drives: Rally yellow Join Date: Jan 2013 Location: Oklahoma Posts: 16	About 305 hp range __________________ Custom Tune "Deep Stage Tuning"350 HP BBK LTH (mild steel) w/HFC R2C CAI Catch can SOLO X-Pipe Exhaust 4 Cluster gauge Hurst Shifter Billet machined pedals Billet machined dead pedal Hurst paddle shifters HERO Halo head lights Spyder LED tail lights ZL1 Rocker panels ZL1 Rock guards (front) Front spliter LED fog lights Blk reverse bezel rings * *Matte Blk OEM SS 20" rims.

11-06-2017, 04:38 PM	#381
officerrob1ls Drives: 2014 1ls csmaro Join Date: Nov 2017 Location: leesburg Posts: 2	2014 v6 1ls Hey guys new to the forum and seen a lot of good advice on here was just wondering if anybody knows a good mechanic in or around central Florida that works on the 2014 lfx motor for my v6 Camaro want to boost the hp/tq a bit higher plus install new clutch and rear gears any advice will be helpful

05-19-2018, 10:59 PM	#382
calflan Drives: 1LT; IBM; 6 Spd Manual Join Date: May 2009 Location: Heath, Tx. Posts: 499	Raven, Where are you located in Oklahoma? I'm in Dallas and looking for a good tune for my V6. Yours boosted your car 45 HP? Hard to believe, but not the first time I've heard a tune makes big difference. I have combo of add ons, but would like to get a tune to see what that does for me as well. I have axle back exhaust, Intake spacer, VMAX throttle body, KN CAI, catch can and plenum spacer. Wondering a couple things if anyone cares to chime in; 1 - what will shorty headers dor for HP and 2 - what will a catback exhaust do HP wise? I think given what I have now, I'm pushing possibly 330 HP, perhaps with a tune and deeper exhaust mods, I'll perhaps push 360? Thanks __________________ 1LT; Airaid CAI; Flowmaster American Thunder Axelback; Int Floor Lts; RS Spoiler; Radio Controls; Sequential tail lights; Oil Catch Can; VMAX Throttle Body; MACE plenum spacer; Mace manifold insulator[/I]

09-19-2019, 10:29 AM	#385
farm rat Drives: 2011 Vistory Red 1LS Join Date: May 2018 Location: Missouri Posts: 487	Plenum is on top of the intake and manifold spacer (Isolator) is between the manifold and block. You get more bang for your buck with the isolator. __________________ The Original Farm Rat 2011 1LS M6 Victory Red Sold 1967 Coupe Green and White 1969 SS 396 Hugger Orange 1969 Z/28 All original White with deluxe interior 1970 RS Blue 1978 Coupe Fugly Green 1978 WS-6 Trans-Am Factory 4 speed 1985 IROC-Z Red

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Laws	ChevyNut	Off-topic Discussions	107	11-09-2016 05:40 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Fesler-Moss Camaro Announced	swchopper	5th Gen Camaro SS LS LT General Discussions	72	05-07-2009 09:40 AM
Camaro Accessories from SEMA	FenwickHockey65	5th Gen Camaro SS LS LT General Discussions	1	11-03-2008 02:25 PM
Q&A with fbodfather (Scott Settlemire) regarding upcoming Camaro	JustinZS	5th Gen Camaro SS LS LT General Discussions	22	05-20-2008 07:48 PM

09-19-2019, 08:41 AM	#384
Cambo Drives: 2010 V6 RS Join Date: Jan 2019 Location: Oregon Posts: 7	Is a plenum spacer different than an intake manifold spacer? I'd like this (these) to be my next mod(s) since it seems like a lot of bang for the buck. Sorry if someone already asked this.

09-19-2019, 11:35 AM	#386
spyderbuddy Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010 Location: Albany, Ga. Posts: 3,474 View My Garage	I don't believe 350Hp without bottle or supercharged I only had 270Hp with my additions