Trans temperature sensor Th400 swap - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

johnjohn · 09-29-2019, 09:51 PM

I have the tr6060 trans sensor, what wires are you guys using in the stock Harness to make the stock gauge work???

Thanks

Vegas Bound · 09-29-2019, 11:05 PM

Drill and weld a bung on your th400 pan and use the tr6060 sensor. That's what I did with my 4L80e.

Bo White · 09-30-2019, 02:40 AM

Buy a Summit aluminum deep pan and drill and tap it.

johnjohn · 09-30-2019, 04:32 AM

Got ya! What do you hook the wires up to so the factory gauge will work?

Vegas Bound · 09-30-2019, 06:52 PM

Quote:

Originally Posted by johnjohn

Got ya! What do you hook the wires up to so the factory gauge will work?

The same as the TR6060.

johnjohn · 09-30-2019, 07:11 PM

My car was a 6l80 trans

Vegas Bound · 09-30-2019, 09:03 PM

Quote:

Originally Posted by johnjohn

My car was a 6l80 trans

Did your 6L80 have a trans temp sensor and the 4 gauge? If so, use the same sensor and wiring. Just install a bung or plug in the new pan.

johnjohn · 10-01-2019, 08:40 AM

It didn’t have one. No sensor anywhere. I guess it’s built I’m the harness

PFL · 02-09-2022, 12:55 PM

Quote:

Originally Posted by johnjohn

It didn’t have one. No sensor anywhere. I guess it’s built I’m the harness

Hi Bro, did it work? I swapped th400 and didn't identify temp sensor on 6l80? did you find a pin on the harness? could anyone help with the answer?

09-29-2019, 09:51 PM	#1
johnjohn Drives: 2010 ss Join Date: Jun 2014 Location: jackson tn Posts: 133	Trans temperature sensor Th400 swap I have the tr6060 trans sensor, what wires are you guys using in the stock Harness to make the stock gauge work??? Thanks __________________ 2010ss L99 to a ls3 s480 turbo lil john cam tuned by james short

09-30-2019, 02:40 AM	#3
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,091	Buy a Summit aluminum deep pan and drill and tap it. Attached Images

09-30-2019, 04:32 AM	#4
johnjohn Drives: 2010 ss Join Date: Jun 2014 Location: jackson tn Posts: 133	Got ya! What do you hook the wires up to so the factory gauge will work? __________________ 2010ss L99 to a ls3 s480 turbo lil john cam tuned by james short Last edited by johnjohn; 09-30-2019 at 07:20 AM. Reason: !!!!!!

09-30-2019, 07:11 PM	#6
johnjohn Drives: 2010 ss Join Date: Jun 2014 Location: jackson tn Posts: 133	My car was a 6l80 trans __________________ 2010ss L99 to a ls3 s480 turbo lil john cam tuned by james short

10-01-2019, 08:40 AM	#8
johnjohn Drives: 2010 ss Join Date: Jun 2014 Location: jackson tn Posts: 133	It didn’t have one. No sensor anywhere. I guess it’s built I’m the harness __________________ 2010ss L99 to a ls3 s480 turbo lil john cam tuned by james short

09-29-2019, 11:05 PM	#2
Vegas Bound Account Suspended Drives: 2013 Sparkly Red One Join Date: Dec 2018 Location: Hospitality State Posts: 2,558	Drill and weld a bung on your th400 pan and use the tr6060 sensor. That's what I did with my 4L80e.