11-02-2019, 03:04 AM | #1 |
Drives: 2018 Camaro Convertible 1SS Join Date: Jul 2018
Location: San Jose, CA
Posts: 13
|
Need help with SS emblem on upholstery
Hello guys,
So I decided to reupholster my Camaro with red leather interior but now I am missing the OEM SS emblem on the seats. Has anyone tried adding those? I can’t find a part number other than the SS emblem with adhesive backing on eBay and Amazon. Will those work? Any advice would help Thanks
__________________
|
11-02-2019, 05:26 AM | #2 |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,575
|
You could have embroidered that on.
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
11-02-2019, 05:42 AM | #3 |
Drives: 2017 SS A8 Hyper Blue/White Stripes Join Date: Jun 2010
Location: Arlington, TN.
Posts: 1,874
|
I agree...
OP, The leather is way to lose to be just installed. I would take it to a good shop and let them work on the fit. If the leather is this lose now they will really look bad after a few months of use. I figured you haven’t got to the door cards yet.
__________________
2017 Camaro 2SS Hyper Blue
2011 Camaro 2SS 2004 Corvette CE SOLD Last edited by Memphis SS; 11-02-2019 at 05:53 AM. |
11-02-2019, 12:54 PM | #4 |
Drives: 2018 Camaro Convertible 1SS Join Date: Jul 2018
Location: San Jose, CA
Posts: 13
|
Ok I’ll do that. Thank you guys.
__________________
|
11-03-2019, 10:45 AM | #5 |
Drives: 2016 2SS Join Date: Mar 2019
Location: The 805 (central coast cali)
Posts: 111
|
I couldn’t find any emblems online to swap out on my SS seats. I switched out my SS emblems on the outside to have black inside the letters. I wasn’t sure if they pop off or how they are attached to the leather. Any thoughts?
__________________
2016 Camaro 2SS A8 MRC NPP Sunroof. Addons: Stainless Works Redline axle back exhaust, Chevrolet cold air intake, C7 sideskirts/front splitter, Diode dynamics side markers
|
11-03-2019, 12:50 PM | #6 |
Drives: LT W/2LT,blue metallic Join Date: Jul 2016
Location: central florida
Posts: 4,918
|
you know its an SS.you spent money on a custom leather interior.do you really want it to look stock,or does it look better without? just something to think about...wouldnt use adhesive emblems,sooner or later theyll look bad,or come off and leave a glue trace where they were.in the olden days i fitted upholstery on musclecar restorations.you really have to work it it to get all seams straight and seat cover tight.since it was a hobby and not a living and done for people i knew,i took my time and did it right.
|
11-03-2019, 03:30 PM | #7 |
Drives: '18 Camaro 2SS VERT Join Date: Jun 2019
Location: Jacksonville, FL
Posts: 121
|
I wouldn't have them embroidered on, personally I like the look of the metal/plastic SS emblems that comes with the car. There HAS to be a part number for it.
|
11-03-2019, 08:46 PM | #8 | |
Drives: SS 1LE, 89 TTA, 91 GTA, 91 Formula Join Date: Jul 2019
Location: NW IN
Posts: 600
|
Quote:
Eh, put it out in the sun and in a week or so it will be fine(provided u installed it evenyl all around). Used to do $2k worth of Jaguar seat covers for one seat and they always looked like hell when first installed. Give it a week or two or a couple days parked outside windows up in the sun and it looked like a million bucks. It was extra fun on XKs when you had to cut them for the seat flip forward lever. If you get back a leather seat replacement and it is all smooth and clean looking, they used heat on it. Personally I would rather it takes a more natural set, but that's me. That does depend on the original quality. |
|
11-17-2019, 03:01 PM | #9 | |
Drives: 2018 Camaro Convertible 1SS Join Date: Jul 2018
Location: San Jose, CA
Posts: 13
|
Quote:
__________________
|
|
11-17-2019, 03:02 PM | #10 |
Drives: 2018 Camaro Convertible 1SS Join Date: Jul 2018
Location: San Jose, CA
Posts: 13
|
I know right? it's weird that I can't find the part number for it, I think they come installed on the leather so you can't get them separately, which is kind of disappointing.
__________________
|
01-02-2021, 06:36 PM | #11 |
Drives: 2017 Camaro 1ss Mosaic Black Join Date: Oct 2018
Location: Md
Posts: 47
|
Red muscle, I’m in the same boat looking for those emblems to be added on .I have to agree i like the emblems on it as well, that’s why I’m trying to add a pair.
I bought the car with the leather seats already done, they did a clean job just would like to find a way to add the SS emblems. Also just wondering do you get really warm and a little sticky in the summer heat with the new leather seats? I do more than in my other car with leather seats . So I’m curious if it has to do with not having any air pockets in the leather like the stock seats to make it breathe better .... |
01-02-2021, 07:18 PM | #12 |
Drives: 2016 Camaro 2SS Join Date: Dec 2015
Location: Arkansas
Posts: 59
|
My emblem came off the drivers seat a few months back. I've been looking for a replacement everywhere. Number on back of emblem is 2777845-1. I've looked on several parts sites.
|
01-02-2021, 09:44 PM | #13 |
Account Suspended
Drives: Fast if no one's looking Join Date: Aug 2019
Location: Cleveland, Ohio
Posts: 1,794
|
It doesn’t look like there’s a separate available part from GM for the emblem. There’s nothing shown in the factory schematic breakdown or parts list of the seats. You probably have to buy an entire cover to get the logo and it’s probably press fit at the factory for the cover.
https://www.gmpartsdirect.com/v-2019...eat-components |
01-02-2021, 11:15 PM | #14 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,696
|
kgf, if you don't mind my asking, how was exactly the emblem attached? Glued, sewed, taped, or...? Is there a backplate behind the seat cover that it clips into perhaps?
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
Post Reply
|
|
|