![]() |
|
|
#141 |
|
E.B.A.H.
Drives: you wild... Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,420
|
Pretty nice.
.431 r/t? 1.7 60'? That's gotta launch really well specially to do 11.45 wth that r/t. =P |
|
|
|
|
|
#142 |
![]() Drives: 69 Z28, 71 vette,01 ZO6,GT500 Join Date: Jul 2008
Location: Seattle, Wa
Posts: 50
|
Looks like your havin problems hookin up with that 60' time compared to your trap 123mph.. I'm guessing mid 11's with those numbers.. Very nice. What gears your running?
__________________
Previous cars: 65 GTO, 69 Z28, 73 vette,
84 vette, 01 SS Camaro, 01 ZO6, 07 Shelby GT500.. 10.97 @ 128mph 1st in line for a new SS Camaro.. Hoping GM will do the right thing. Super charge the new SS.. So it will compete with the big dogs! http://www.youtube.com/watch?v=rnevMoEut_E vs. ZO6 http://www.youtube.com/watch?v=V2l25Q5AHc4 10.97 run http://www.youtube.com/watch?v=vML-dKHCcLg dyno vid http://www.youtube.com/watch?v=yLtQEdfN-CA hole shot |
|
|
|
|
|
#143 | ||
|
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
Quote:
Quote:
![]() stock A4 stock gears...stock everything but blower and tires...even stock 17 inch rims. I can't spend any money on rims till I get at least boost and fuel pres. gauges. it does launch pretty well.....gotta roll into the pedal...drop tire pressure...it's practically voodo Here's a 12.2 1.8 ![]() You can't get enough rubber in these wheel wells to support much more than this. and IF I could get more rubber...something would most likely break (axle stubs trans etc) P.S> nice 10 run Bob!
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
![]() http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com Last edited by Wm Holden; 08-03-2008 at 06:29 PM. |
||
|
|
|
|
|
#144 |
|
Petro-sexual
|
For referrence, this is what a 1900 (the same size as the CTS-V) will do on a G8. It's a long read, but it made around 460 RWHP with a Borla catback and OEM airbox I think, in order to get a CARB exemption. I'm sure we'll be seeing CTS-Vs putting dow similar numbers, if not a little higher, and this was on a OEM L76 longblock with AFM, not an LS3...
http://www.g8board.com/forums/showthread.php?t=1337
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|
#145 |
|
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
![]() http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com |
|
|
|
|
|
#146 |
|
Petro-sexual
|
Yeah, that's a good thread. I don't remember how many PSI it was pushing, but I know it wasn't the 9-10.5 lbs. the 1900 and 2300 are pushing in the LSA and LS9. Just think that if GM stuffed some better rods and crank in the bottom end that it would easily be making those power levels. Grr. I guess since Magnuson has a CARB number I'm not so worried about a supercharged OEM Camaro, however, I'd still prefer all the engineering that went into it, AND the warranty. Anyhoo, this looks to be a nice alternative if those of us who are looking for what I posted and don't get it.
Pulley-up!!!
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|
#147 | |
|
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
Quote:
just makes 'em more rare....which I'm enjoying in my GTO world. I pull into the BMW dealership and get asked to pop the hood..... It's kinda cool....they hear it and know it's rare. ![]() (of course I can't help blippin')
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
![]() http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com |
|
|
|
|
|
|
#148 |
|
E.B.A.H.
Drives: you wild... Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,420
|
Soon as warranty is up, STS Twins for my vert, or if a Z comes out, I might just buy that instead.
|
|
|
|
|
|
#149 |
|
JEFF2010SSMANUAL
Drives: IOM 2SS/RS LS3 Join Date: Aug 2008
Location: Northern IL
Posts: 1,953
|
I just want a loaded LS3 manual SS/RS with all the options, but not a convertable. Maybe is a couple years I will put on a GM supercharger. This will be my daily driver, so snows will go on for 3-4 months here in Northern IL. I only work 14 days a month and drive 2 miles to work.
|
|
|
|
|
|
#150 | |
|
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
Quote:
This is a single a buddy made for about 2k..... here's Erics last vid. with 2 BOV releases. ![]() The long oil lines freak me out.
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
![]() http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com |
|
|
|
|
|
|
#151 |
![]() Drives: C4Vette,C5-Z06,Cherokee Join Date: Apr 2008
Location: Cleveland
Posts: 43
|
I'm waiting. I was ready to go for the Z28...had talks with my dealer buddies and everything. I'm not one of the "I'll just hop up my SS to the same horsepower as the Z28" kind of guys... Yep, easy to do..but at the end of the day it's just another hopped up Camaro....not special.
My beater Jeep could have held out until early '09, but the delay of the Z sealed the deal. I considered a HHR-SS, but ended up with a new Mazdaspeed3 in the interim. Decent car, but am I happy? No. Would I every buy a v6 RS for about the same money...uh no, that would be like having a berlinetta compared to an Iroc. Am I going to spend money on a SS only to trade it in on a Z28?...not the smart money either. I'm only doing this once. |
|
|
|
|
|
#152 | |
|
Petro-sexual
|
Quote:
I'm sorry for making this so long, but it's not about being lazy or anything, it's about a whole package, and staying out of trouble
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|
|
#153 |
|
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,441
|
^
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
|
|
|
|
|
#154 | |
|
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
Quote:
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
![]() http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com |
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Camaro Super Sport might get a 550-plus-horsepower supercharged V8 | camaro5 | Forced Induction - V8 | 30 | 04-30-2008 01:20 PM |
| The new CTS V for 2009!!! LSA GMHTP...READ THIS. | TAG UR IT | General Automotive + Other Cars Discussion | 15 | 04-01-2008 10:21 PM |
| GMHTP '09 CTS-V Gets 550+HP LSA! | TAG UR IT | General Automotive + Other Cars Discussion | 8 | 02-28-2008 11:47 PM |
| All this LS9, LSA, and DI Speculation. | Good53X | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 1 | 12-12-2007 03:42 PM |
| GM Cancels Cobalt SS Supercharged | Mr. Wyndham | General Automotive + Other Cars Discussion | 35 | 07-31-2007 02:00 AM |