Any Shops That’ll Gut Primaries In Houston or Abilene - Page 3

MrChrisLS3 · 12-28-2019, 09:41 PM

Quote:

Originally Posted by YoungFamous

Any Shops That’ll Gut Primaries In Houston or Abilene?

Not a one. You'll have to do it yourself. I know you don't care about fines, but they sure as hell do. Now, of course, I'm talking about reputable shops. I'm sure there are some places that will take the cash, but will probably leave you with a lot of leaks, and maybe even some rattles by not clearing out the cat completely.

Besides, why not just do it right the first time and throw some long tubes with off road pipes?

laynlo15 · 12-29-2019, 07:43 AM

I ran 10.03@139 with factory exhaust including the factory cats on stock motor and just my old 2300 Heartbeat Did not replace those till I built my motor and added long tubes. So the factory exhaust is not that bad. So somewhere along the line I probably Gapped some gutless cats at the track.

95 imp · 12-29-2019, 10:20 AM

Quote:

Originally Posted by KingLT1

Better have yo gap insurance!

This policy?

laynlo15 · 12-29-2019, 11:28 AM

haha

oldman · 12-29-2019, 03:39 PM

Quote:

Originally Posted by MrChrisLS3

Not a one. You'll have to do it yourself. I know you don't care about fines, but they sure as hell do. Now, of course, I'm talking about reputable shops. I'm sure there are some places that will take the cash, but will probably leave you with a lot of leaks, and maybe even some rattles by not clearing out the cat completely.

Besides, why not just do it right the first time and throw some long tubes with off road pipes?

DIY for no increase in HP, and it will immediately throw a check engine light. Plus no front cats sound like buttox….. on a LT1

MrChrisLS3 · 12-29-2019, 10:58 PM

Quote:

Originally Posted by oldman

DIY for no increase in HP, and it will immediately throw a check engine light. Plus no front cats sound like buttox….. on a LT1

I agree completely.

Not to mention that the counties in and around the Houston area require emission testing and inspection for registration renewals.

12-29-2019, 07:43 AM	#30
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,862	I ran 10.03@139 with factory exhaust including the factory cats on stock motor and just my old 2300 Heartbeat Did not replace those till I built my motor and added long tubes. So the factory exhaust is not that bad. So somewhere along the line I probably Gapped some gutless cats at the track. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff Last edited by laynlo15; 12-29-2019 at 07:53 AM.

12-29-2019, 11:28 AM	#32
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,862	haha __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

User Name		Remember Me?
Password