![]() |
|
|
#1 |
![]() Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Bearings
Ive researched so much im still a little confused.
I have 2014 Camaro SS 1LE Replacing the bearings because of a clunks with switching directions forward/reverse and low speed turns from stop. Then im getting a vibration/growling/howling at 90 n louder more noticeable up to 100-105. It wasn’t doing it before i started my track days. Fluids are good. So going to start narrowing it down. Here’s the question. Part #25954415 Forum says they will fit? Are they made for the 1LE and its abuses? |
|
|
|
|
|
#2 |
|
Instagram: Sangstah
|
SS and 1LE have the same wheel bearings, that part number is good to go.
|
|
|
|
|
|
#3 |
![]() Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013
Location: Galion, Oh
Posts: 531
|
They are ZL1 wheel bearings. ZL1 hub part #25954415 then should be able to get diagram to get the bearing part #s.
Sent from my SM-G960U using Tapatalk
__________________
2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.
|
|
|
|
|
|
#4 |
![]() Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013
Location: Galion, Oh
Posts: 531
|
Lots of part #s. here..
![]() Sent from my SM-G960U using Tapatalk
__________________
2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.
|
|
|
|
|
|
#5 |
![]() Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Thanks guys.
Ordered. So F&R pads, catch can, bearings orderd. Next weekend or weekend after ill tear into. Hopefully that cures it. If not its in the 1/2 shafts or diff? Well see as I’ll probably do a rear end service at same time. |
|
|
|
|
|
#6 |
![]() Drives: 15 1SS 1LE Join Date: Nov 2019
Location: Orlando, Fl
Posts: 51
|
Mine makes the same howl at highway speeds. I hope it's the hubs and not the diff.
|
|
|
|
|
|
#7 | |
![]() Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Quote:
Or IM me and ill get back to you with an update. Mine clunks pretty bad forward/backwards n turning from stand still and at 90+ definitely has a howl/minor vibration associated w speed. I find it hard to believe its normal. I hate stealership and try to fix what i can. |
|
|
|
|
|
|
|
|
![]() |
|
|