New bumper - Page 34 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

milo8604 · 02-14-2020, 11:02 PM

I am pleased with the results. There is minor fitment issues as to be expected for an aftermarket kit.

Jayjellyfish212 · 02-16-2020, 12:52 PM

Quote:

Originally Posted by milo8604

I am pleased with the results. There is minor fitment issues as to be expected for an aftermarket kit.

That looks really good! Nice job!!

John c · 02-25-2020, 11:51 PM

I’m installing the same bumper on my 2013 RS and I’m having trouble with the fog lights/drls. I spliced the supplied connectors to my harness but they don’t work, any ideas?

Maharam · 02-26-2020, 10:05 PM

Quote:

Originally Posted by John c

I’m installing the same bumper on my 2013 RS and I’m having trouble with the fog lights/drls. I spliced the supplied connectors to my harness but they don’t work, any ideas?

I have a 14 LS but I had success by using an add a fuse to the ignition and splicing the DRL signal wire to the turn signal connector. I also got it working with a basic relay off the constant power, but decided I’d rather have them on auto then switchable

John c · 02-27-2020, 02:32 AM

Thanks, I’ll try doing that.

LsxDoctor · 02-27-2020, 11:27 AM

Anyone have a link for an SS badge for the lower front grill? I tried modifying the stock one to fit and didn't look good.

alice · 02-29-2020, 12:30 PM

Quote:

Originally Posted by milo8604

I am pleased with the results. There is minor fitment issues as to be expected for an aftermarket kit.

I have a 2010 Camaro LLT and I would like to install this exact front bumper that you have. Due to some confusion, could you tell me where you purchased it and the item description? Will it fit the 2010 Camaro? Does it come with the belly pan and if not where do I get it?

Pagliaro · 03-04-2020, 09:10 AM

Quote:

Originally Posted by alice

I have a 2010 Camaro LLT and I would like to install this exact front bumper that you have. Due to some confusion, could you tell me where you purchased it and the item description? Will it fit the 2010 Camaro? Does it come with the belly pan and if not where do I get it?

This is the biggest worry for everyone starting this project.

When it comes to the bumper itself there is only 1.
You'll see packages for 2010-2013 models because they include headlights. The bumper physically is the same in all packages.

Its body lines will only pair with SS or Z/28 hood from 2014-2015 by default.

2014 2015 6th gen style headlights if you want proper form factor.

You'll have to scour suppliers for Bellypans. I've seen some purchases not include them even when it was in package.

milo8604 · 03-04-2020, 03:13 PM

Does any one know where to get the glow tie and mounting hardware

alice · 03-12-2020, 02:04 PM

Quote:

Originally Posted by Pagliaro

This is the biggest worry for everyone starting this project.

When it comes to the bumper itself there is only 1.
You'll see packages for 2010-2013 models because they include headlights. The bumper physically is the same in all packages.

Its body lines will only pair with SS or Z/28 hood from 2014-2015 by default.

2014 2015 6th gen style headlights if you want proper form factor.

You'll have to scour suppliers for Bellypans. I've seen some purchases not include them even when it was in package.

Do you need to install the crash absorbers behind the new bumper??

Pagliaro · 03-12-2020, 08:08 PM

Quote:

Originally Posted by alice

Do you need to install the crash absorbers behind the new bumper??

Mine doesn't have it.

milo8604 · 03-13-2020, 01:54 AM

My bumper came with a belly pan. Some of the holes where not exact but it did fit without cutting. I think i had to drill 4 holes what did not align. I went with VLAND headlights. I had an issue with the passenger side DRL blowing the fuse soon as it touches positive. I had to cut the black and white wires inside of headlight for DRL. Then switch them black to white to get them to function. Must have been a manufacturing error. Other that that I have no complains except it would make more sense for Icon to mold the bumper without 14-15 hood lines so it would match all years and models 10-15

alice · 03-13-2020, 07:47 AM

I pulled the trigger and ordered the Ikon kit with headlights and wiring harness adapters. I really like the aggressive looks of the new bumper. Since Pagliaro has not installed the absorbers behind the bumper, what supports the bumper or does it need any support? I have had my stock front bumper off several times and see that it keys in to the crash bar that is attached to the frame rails. If I am correct, the new bumper will NOT use the crash bar as a support member. Could someone explain my comments so I have a better understanding of what to expect? I appreciate everyone's input.

alice · 03-13-2020, 10:54 AM

Quote:

Originally Posted by orange devil

New face finally installed

Do you have a part number or specific application for the RS emblem?

02-14-2020, 11:02 PM	#463
milo8604 SSonBayou Drives: GreySS M6 SS Join Date: Nov 2014 Location: Louisiana Posts: 61 View My Garage	I installed mine today I am pleased with the results. There is minor fitment issues as to be expected for an aftermarket kit. Attached Images

02-27-2020, 11:27 AM	#468
LsxDoctor 15 Year LS1Tech Member Drives: 2010 ss 391ci LS3 Join Date: Apr 2017 Location: Albuquerque Posts: 252	Anyone have a link for an SS badge for the lower front grill? I tried modifying the stock one to fit and didn't look good. __________________ GJDM

03-04-2020, 03:13 PM	#471
milo8604 SSonBayou Drives: GreySS M6 SS Join Date: Nov 2014 Location: Louisiana Posts: 61 View My Garage	Does any one know where to get the glow tie and mounting hardware __________________ Nightfury Camshaft \| AGP TT 57/57's \| AGP/Fore Triple Pumps \| ID1050X Injectors \| Custom 3" Exhaust \| McLeod Twin RXT \| 10lbs boost 779/707 on E85 711/641 on 93. Tuned by Geoff Skinner EPS

03-13-2020, 01:54 AM	#474
milo8604 SSonBayou Drives: GreySS M6 SS Join Date: Nov 2014 Location: Louisiana Posts: 61 View My Garage	My bumper came with a belly pan. Some of the holes where not exact but it did fit without cutting. I think i had to drill 4 holes what did not align. I went with VLAND headlights. I had an issue with the passenger side DRL blowing the fuse soon as it touches positive. I had to cut the black and white wires inside of headlight for DRL. Then switch them black to white to get them to function. Must have been a manufacturing error. Other that that I have no complains except it would make more sense for Icon to mold the bumper without 14-15 hood lines so it would match all years and models 10-15 __________________ Nightfury Camshaft \| AGP TT 57/57's \| AGP/Fore Triple Pumps \| ID1050X Injectors \| Custom 3" Exhaust \| McLeod Twin RXT \| 10lbs boost 779/707 on E85 711/641 on 93. Tuned by Geoff Skinner EPS

02-25-2020, 11:51 PM	#465
John c Drives: 2013 Camaro RS Join Date: Feb 2020 Location: New Jersey Posts: 5	I’m installing the same bumper on my 2013 RS and I’m having trouble with the fog lights/drls. I spliced the supplied connectors to my harness but they don’t work, any ideas?

02-27-2020, 02:32 AM	#467
John c Drives: 2013 Camaro RS Join Date: Feb 2020 Location: New Jersey Posts: 5	Thanks, I’ll try doing that.

03-13-2020, 07:47 AM	#475
alice Drives: 2010 camaro limited edition turbo Join Date: Mar 2014 Location: saint petersburg, florida Posts: 499 View My Garage	I pulled the trigger and ordered the Ikon kit with headlights and wiring harness adapters. I really like the aggressive looks of the new bumper. Since Pagliaro has not installed the absorbers behind the bumper, what supports the bumper or does it need any support? I have had my stock front bumper off several times and see that it keys in to the crash bar that is attached to the frame rails. If I am correct, the new bumper will NOT use the crash bar as a support member. Could someone explain my comments so I have a better understanding of what to expect? I appreciate everyone's input.