You are browsing camaro5 
 |
|
03-02-2020, 02:29 PM
|
#1 |
 
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 525
|
Pic Request: 1 inch drop, stock wheels, spacers.
Hi Guys,
Per above does anyone have pictures of a moderate drop 1 inch or so with the stock wheels along with spacers? Trying to save a few bucks coming off of a lapse in employment, but good weather is fast approaching. Eventually would be doing some Replica's but Handling is a must on this boat. I am doing Sways and 1 inch drop, figured spacers as i wouldnt drop with the current offsets. Pics anyone?? |
|
|
|
03-03-2020, 04:37 PM
|
#2 |
|
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 525
|
?
|
|
|
|
|
03-03-2020, 05:53 PM
|
#3 |
|
Drives: 2011 Camaro SS Join Date: Jul 2017
Location: Wichita,KS
Posts: 610
|
Mines 1.4 drop with 20 mm spacers.
__________________
2011 Camaro 2SS, 6.0 iron block forged bottom end, Dart heads, BTR intake, Huron twin turbo kit, Summit stage 3 twin turbo cam, Circle D stage 4 6L90, 3800 FTI converter. BMR suspension, Viking coil overs, Fore triple pump fuel system.
|
|
|
|
|
03-06-2020, 06:54 AM
|
#4 |
 |
1" Drop
Hello,
My ZL1 has the BMR 1" drop springs, I did not like the squat in the back so added 1/2" spacers to the back springs. 295 tires up front and 315 in back. If you look up my build page you can see what else was done. https://www.camaro5.com/forums/showt...=571243&page=2 |
|
|
|
|
03-10-2020, 07:10 AM
|
#5 |
 
|
This is pretty close. Ridetech coilovers, 1” drop in front, 1 1/8” drop in rear. Stock wheels and stock tire sizes. Eibach 15mm spacers front and rear.
|
|
|
|
|
03-10-2020, 07:39 AM
|
#6 |
 
Drives: 2013 camaro SS Join Date: Aug 2019
Location: Louisiana
Posts: 203
|
|
|
|
|
|
03-10-2020, 11:25 AM
|
#7 |
|
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,367
|
1” drop front and rear with Ridetechs. Tires are 285/295 on 10.5” wheels, 5mm spacer on fronts.
|
|
|
|
|
03-10-2020, 10:44 PM
|
#8 |
Drives: 2015 1SS 1LE Join Date: Sep 2015
Location: Texas
Posts: 166
|
BMR 1" drop. I have aftermarket wheels but they are stock SS 1LE sizes and offsets. 285 front and 305 rear.
|
|
|
|
|
03-27-2020, 09:00 AM
|
#9 |
|
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 525
|
Thanks for the pics guys.
I am probably going to do a 1 inch drop with BMR or hotchki's springs. I am looking at the ZL1 replica's probably 20 x 10 +23mm offsets all around. Any pics of the above will be appreciated as well. I am obviously going for the 2013 1LE look. Will be adding the front splitter wheels soon if I can decide on tires and which gen rims |
|
|
|
|
03-27-2020, 01:08 PM
|
#10 | |
|
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,367
|
Quote:
|
|
|
|
|
|
|
|
|
 |
|
|
