V6 Clutch Replacement

[bubbagumper6]

Anyone have a decent writeup on replacing the clutch in a V6? Seems like most of the content on here is geared more towards V8.

Also, are the remote bleeder lines interchangeable? The Tick website only shows compatibility with the V8 but I would assume if the fitting is the same it would work on the V6.

Besides the remote bleeder, anything else I should be aware of? 2010 LT/RS with 124k miles desperately needs a new clutch and figured since we're all stuck at home right now it would be a great time to get er done...

Thanks

[bill522]

Might be able to get some good direction on the 5th Gen Camaro V6 page(s)

[bubbagumper6]

Originally Posted by bill522

Might be able to get some good direction on the 5th Gen Camaro V6 page(s)

Is that not where I am?

[bubbagumper6]

Having trouble confirming OEM part numbers for flywheel and pressure plate bolts. Both are listed as TTY and must be replaced so I figured I might as well.

I *think* these are the right part numbers but would love someone to confirm. Would also love to know their thread dimensions. Contacted ARP for replacements but they don't have a kit for the V6 so would only be able to match thread dimensions.

Flywheel (qty 8): 11588884
Clutch Pressure Plate (qty 6): 11611397

[cawengr]

Just had my clutch replaced on my 2011 CTS 3.6, the flywheel bolt part number is correct, the pressure plate bolt is 11570903.
Flywheel bolt is 10 mm x 1.0 mm x 23 mm Socket Head Cap Screw 8 mm Socket 10.9 grade
Pressure Plate Bolt is 8 mm x 1.2 mm X 20 mm Hex Head Bolt with integrated washer head 10 mm Hex Head 10.9 grade

[bubbagumper6]

Originally Posted by cawengr

Just had my clutch replaced on my 2011 CTS 3.6, the flywheel bolt part number is correct, the pressure plate bolt is 11570903.
Flywheel bolt is 10 mm x 1.0 mm x 23 mm Socket Head Cap Screw 8 mm Socket 10.9 grade
Pressure Plate Bolt is 8 mm x 1.2 mm X 20 mm Hex Head Bolt with integrated washer head 10 mm Hex Head 10.9 grade

Awesome man, thank you.