You are browsing camaro5 
 |
|
06-24-2020, 08:49 PM
|
#1 |
 Drives: 2013 LS3 Camaro Join Date: Jul 2017
Location: Augusta, GA
Posts: 94
|
Bo White?
Does Bo White still port throttle bodies?
|
|
|
|
06-24-2020, 09:02 PM
|
#2 |
          
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,587
|
I think so. Have you tried sending him a PM? He was just on here a couple days ago.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
06-24-2020, 09:31 PM
|
#3 |
|
Started#gottalovethatblue
|
Last that I heard yes. PM him here and see if he will hook you up.
__________________
|
|
|
|
|
06-24-2020, 09:54 PM
|
#4 |
|
Lifetime Philly Fan
Drives: 2015 Spring Edition 2SS M-6 Join Date: Mar 2012
Location: South Central Florida
Posts: 1,862
|
I'm interested also. Is the turnover time pretty quick?
__________________
2015 Green Flash, Delivered 4/10/15
CAI, NPP Exhaust, Short-throw shifter BBK LT HEADERS 1 7/8” Tune by DynoSteve via SCTx4 Tuner One of 82 GF Ragtops built in '15 out of 811 Total [/SIZE]  |
|
|
|
|
06-25-2020, 05:52 AM
|
#5 |
Drives: 2013 Camaro SS Vert Join Date: Apr 2019
Location: Otsego, MI
Posts: 70
|
He has done mine and a firend's a few months ago. Turn around was about a week. Most of that was shipping it back and forth. He gets them done fast.
|
|
|
|
|
06-25-2020, 06:56 AM
|
#6 |
|
Started#gottalovethatblue
|
It's been a long time since I had mine done by him, but the turn around was quick and if you're a bolt on non tune car, his throttle bodies are an absolute must have especially if you have an automatic.
__________________
|
|
|
|
|
06-25-2020, 07:29 AM
|
#7 |
 
Drives: 2011 Camaro SS Join Date: Sep 2017
Location: Peoria
Posts: 254
|
Yes he does....he is very active on the FB 5th gen groups
__________________
2011 SS -GPI SS3 vvt, circle D 4c, 3.91 gears, solo mach xl exhaust, speed engineering headers, bo white ported throttle body, Roto fab intake, adm transcooler, elite catch can
|
|
|
|
|
06-25-2020, 07:35 AM
|
#8 | |
 
|
Quote:
__________________
2013 Camaro SS/RS, Stainless Power long tube headers with HF's, Air Raid CAI, Solo Mach XL cat back, BC Racing coil overs, Elite Engineering catch can, Ferrada Forge 8 Wheels, Windows tinted at 20%, Tuned by Dyno Steve.
 |
|
|
|
|
|
06-25-2020, 09:43 AM
|
#9 | |
Drives: 2010 Camaro 2SS Join Date: Mar 2018
Location: Pensacola, FL
Posts: 268
|
Quote:
|
|
|
|
|
|
06-25-2020, 09:58 AM
|
#10 | |
|
Started#gottalovethatblue
|
Quote:
__________________
|
|
|
|
|
|
06-25-2020, 10:04 AM
|
#11 |
|
Drives: 2013 Camaro SS Vert Join Date: Apr 2019
Location: Otsego, MI
Posts: 70
|
Agreed. It is throttle response not power that you gain. And it works much better if you don't get talking with your buddy and forget to plug in the wire harness. Although you get an nice rough idle if its not plug it in. Just saying........
|
|
|
|
|
06-25-2020, 10:12 AM
|
#12 |
Drives: 2015 2SS White Convertible CE/INDY Join Date: Mar 2016
Location: Lockport, IL
Posts: 780
|
I talked to Bo recently about his PTB and he is still doing them, however, you need to send him yours to port... whereas in the past, you could have just bought a ported one from him.
joe...
__________________
ARH LTH/HFC/Legato muffler, RDP Custom Tune, K&N Blackhawk CAI, Bigworm Blackout kit, ZL1 Rims, Phantom Grills, VMAX PTB
|
|
|
|
|
06-25-2020, 11:03 AM
|
#13 |
|
Drives: 2013 LS3 Camaro Join Date: Jul 2017
Location: Augusta, GA
Posts: 94
|
Awesome, thanks everyone! I will reach out to him.
|
|
|
|
|
06-25-2020, 11:45 PM
|
#14 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,695
|
I have a ported one that was a new Tb I got from Bo - if he’s not doing them. I’ll dig up the box when I get home. I have a NW 102 now so don’t need it. Have a VMax too..
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
|
|
|
 |
|
|
