Spoke with someone at BBK, he suggested I look at my oxygen sensor connectors before - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Coleblak · 08-15-2020, 11:49 PM

I order their extenders to connect to the downstream oxygen sensors on the headers i ordered. The guy said that occasionally they have to redirect people to another company for extenders that use a different connector. Has anyone found this to be a common issue?

Pearlj10 · 08-16-2020, 10:30 AM

Here’s a note from Phasetek’s site on the BBK harnesses:

Note: Locator Tabs
These O2 sensor extensions will work on 3 and 4 wire applications. Some connectors may require the small directional location tabs to be removed on the ends of the connectors to click into place. No cutting or splicing is required.

You can also cut a wire tie and get enough slack in the factory harness to collect to the BBK sensor locations.

08-15-2020, 11:49 PM	#1
Coleblak Drives: 2010 chevrolet Camaro LT Join Date: Jun 2020 Location: Oregon Posts: 16	Spoke with someone at BBK, he suggested I look at my oxygen sensor connectors before I order their extenders to connect to the downstream oxygen sensors on the headers i ordered. The guy said that occasionally they have to redirect people to another company for extenders that use a different connector. Has anyone found this to be a common issue?

08-16-2020, 10:30 AM	#2
Pearlj10 Drives: 2011 Camaro 2LT Join Date: Oct 2018 Location: Az Posts: 367	Here’s a note from Phasetek’s site on the BBK harnesses: Note: Locator Tabs These O2 sensor extensions will work on 3 and 4 wire applications. Some connectors may require the small directional location tabs to be removed on the ends of the connectors to click into place. No cutting or splicing is required. You can also cut a wire tie and get enough slack in the factory harness to collect to the BBK sensor locations.