What Did You Do To Your Camaro Today? - Page 1707 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Quicksilver2SS · 10-31-2020, 04:42 PM

Painted my weighted stainless shift ball I got from Twisted Shifterz, If paint doesn't last, it's off to the powder coater. Hurst billet shifter is finally going to be installed tomorrow along with Powerstop Z26 pads.

SIM GhostrdrZ · 10-31-2020, 05:21 PM

Quote:

Originally Posted by Quicksilver2SS

Painted my weighted stainless shift ball I got from Twisted Shifterz, If paint doesn't last, it's off to the powder coater. Hurst billet shifter is finally going to be installed tomorrow along with Powerstop Z26 pads.

Looks great.
Don’t forget to blacken the shift numbers and then clear coat might make it a last long time. But I’ve always liked the ole school white shift knob.

Quicksilver2SS · 10-31-2020, 11:31 PM

Thanks! Doing that next, hopefully the clear will yellow a little adding to the vintage look.

Valkyrie14 · 11-01-2020, 11:20 AM

Changed outer toe rod on driver’s side. Steering is tight again. Snow tires and alignment hopefully this week. Waiting on dealership to get tires in.

0stones0 · 11-01-2020, 11:39 AM

Quote:

Originally Posted by Quicksilver2SS

Thanks! Doing that next, hopefully the clear will yellow a little adding to the vintage look.

Another color that will give you that look is canvas white.

chevy 3 · 11-01-2020, 06:07 PM

Quote:

Originally Posted by ariZona28

I'm originally from Chicago. If that key is not in the ignition for its intended purpose it's in my pocket or in the house out of sight. Trust no one and you won't be disappointed.

My car gets parked on a lift in a garage that has a door and behind that door is a 1949 gasser business coop deluxe. If and this is a big if ! If you can figure out how to first start the gasser and move it and then get my car off the lift before my 155 pound Great Dane ( jerry ) gets to you. Good luck. Besides that the key never leaves the car unless I’m out with the car then the key never leaves my pocket.

Name: 71EB93B5-EC66-4AEB-9476-AEF4A03AC8AB.jpg
Views: 328
Size: 59.6 KB

Name: 71EB93B5-EC66-4AEB-9476-AEF4A03AC8AB.jpg
Views: 328
Size: 59.6 KB

chevy 3 · 11-01-2020, 06:13 PM

Name: 8C3F10EA-6B7A-432A-A9A7-C57A7BECCBD8.jpg
Views: 439
Size: 192.6 KB

Before I’m asked what a gasser is here is a pic

chevy 3 · 11-01-2020, 06:20 PM

Quote:

Originally Posted by InFiD3ViL

Dude, I have been back to this thread dozens of times already to look at your interior picture, no lie. I know it's just seats and a floor liner, but it just looks so dang good. I love when people post pictures of stuff like this because it helps to inspire us with our own cars. I have gotten tons of ideas from this site and other members. The downside is that it has also lead me to spend a small fortune lol.

This right here is what it is all about. I’ve changed things a few times but it’s all coming together. Glad you like it and I just got the airbag by pass harnesses today so that will rap it up for now.
But I will say the floor liners and seats came together perfectly for what I was looking for. I’ve been on this site since 2009 and it keeps getting better. These cars are frigging addicting as hell.

Moto-Mojo · 11-01-2020, 06:35 PM

Quote:

Originally Posted by chevy 3

Attachment 1049042

Before I’m asked what a gasser is here is a pic

Old Skrool! Reminds me of building Revelle models.

chevy 3 · 11-01-2020, 06:36 PM

The floor covers are from
Custom fit diamond floor mats.
I found on amazon. Don’t go cheap you get what you pay for. The ones in the car are close to 200 for front and back. But are different then regular floor mats. I have the camaro mats and a set of the plastic floor covers also. This was different then what I’ve been seeing and kinda gave a customer look. Hope this helps

0stones0 · 11-01-2020, 08:32 PM

Quote:

Originally Posted by Moto-Mojo

Old Skrool! Reminds me of building Revelle models.

Funny, that’s what came to mind when seeing the pic. If I had all those models I built from back then, I need a garage bigger than the one my real cars are in!

Mr2Hard2See · 11-02-2020, 09:18 AM

Yesterday I installed my new carbon rear StreetFighter La spoiler.

crazy4camaro · 11-02-2020, 11:18 AM

dented and scratched the crap out of my driver side door when the wire shelving support clips broke and all the Christmas decorations and misc junk that is stored in plastic tubs in my garage came crashing down on my once scratch and dent free camaro

Mr2Hard2See · 11-02-2020, 11:25 AM

Quote:

Originally Posted by crazy4camaro

dented and scratched the crap out of my driver side door when the wire shelving support clips broke and all the Christmas decorations and misc junk that is stored in plastic tubs in my garage came crashing down on my once scratch and dent free camaro

That’s sucks man. Is it only the door area?

10-31-2020, 04:42 PM	#23885
Quicksilver2SS Drives: 2SS/RS LS3 NPP Join Date: Feb 2018 Location: Sacramento Posts: 227	Painted my weighted stainless shift ball I got from Twisted Shifterz, If paint doesn't last, it's off to the powder coater. Hurst billet shifter is finally going to be installed tomorrow along with Powerstop Z26 pads. Attached Images __________________ Taylor 409's, BF Comp 2's, Z26 pads, Hurst billet shifter

10-31-2020, 11:31 PM	#23887
Quicksilver2SS Drives: 2SS/RS LS3 NPP Join Date: Feb 2018 Location: Sacramento Posts: 227	Thanks! Doing that next, hopefully the clear will yellow a little adding to the vintage look. __________________ Taylor 409's, BF Comp 2's, Z26 pads, Hurst billet shifter

11-01-2020, 11:20 AM	#23888
Valkyrie14 Valkyrie14 Drives: Chevrolet Camaro SS Join Date: Mar 2020 Location: Eau Claire, Wisconsin Posts: 962	Changed outer toe rod on driver’s side. Steering is tight again. Snow tires and alignment hopefully this week. Waiting on dealership to get tires in. __________________ 2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM

11-01-2020, 06:13 PM	#23891
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,329 View My Garage	Before I’m asked what a gasser is here is a pic

11-01-2020, 06:36 PM	#23894
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,329 View My Garage	The floor covers are from Custom fit diamond floor mats. I found on amazon. Don’t go cheap you get what you pay for. The ones in the car are close to 200 for front and back. But are different then regular floor mats. I have the camaro mats and a set of the plastic floor covers also. This was different then what I’ve been seeing and kinda gave a customer look. Hope this helps

11-02-2020, 11:18 AM	#23897
crazy4camaro Drives: 2012 RSLT,1979 Trans Am Join Date: Jul 2012 Location: IRB.Florida Posts: 291	dented and scratched the crap out of my driver side door when the wire shelving support clips broke and all the Christmas decorations and misc junk that is stored in plastic tubs in my garage came crashing down on my once scratch and dent free camaro