You are browsing camaro5 
 |
|
09-13-2020, 11:50 AM
|
#1 |
 
Drives: 2011 SS Join Date: May 2020
Location: Ontario
Posts: 25
|
Tach signal
I'm wondering if anyone knows a connection point to find the tach signal? I'm hooking up an innovate wideband/boost gauge with shift light. Purple wire goes to tach signal.
Did gm put in a connector for this? Or just use coil negative side? |
|
|
|
09-14-2020, 07:44 PM
|
#2 |
 
Drives: 2014 SS 2010 SS 93 Camaro z28 Join Date: Apr 2017
Location: Ohio
Posts: 254
|
There’s a few post about it on here or you can get the msd tach adapter
|
|
|
|
|
09-14-2020, 10:03 PM
|
#3 |
|
Drives: 2011 SS Join Date: May 2020
Location: Ontario
Posts: 25
|
Thanks for the info, I can work with that.
|
|
|
|
|
09-17-2020, 01:51 PM
|
#4 |
|
Drives: 2010 Chevy Camaro ss Join Date: Oct 2017
Location: spokane washington
Posts: 27
|
Get the AUTO METER 9123 RPM Signal Adapter for LS Engines. Its plug and play and clean . I use one never had issues. Less than 5 min install.
|
|
|
|
|
09-17-2020, 03:57 PM
|
#5 |
         
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 3,065
|
I just tapped into the #1 coil plug. Worked for NOS controller and AEM Failsafe gauge.
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes. |
|
|
|
|
09-18-2020, 09:11 PM
|
#6 |
|
Drives: 2011 SS Join Date: May 2020
Location: Ontario
Posts: 25
|
What color wire cracka? Pink wire won't work for me
|
|
|
|
|
09-21-2020, 02:01 PM
|
#7 |
|
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 3,065
|
I'll go take a pic.
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes. |
|
|
|
|
09-21-2020, 02:54 PM
|
#8 |
|
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 3,065
|
looks like the purple one next to the pink one.
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes. |
|
|
|
|
09-21-2020, 08:09 PM
|
#9 |
|
Drives: 2011 SS Join Date: May 2020
Location: Ontario
Posts: 25
|
Thanks, I'll try that
|
|
|
|
|
09-27-2020, 08:08 AM
|
#10 |
|
Drives: 2011 SS Join Date: May 2020
Location: Ontario
Posts: 25
|
Purple wire worked, set setttings to 1/.5.
Thanks |
|
|
|
|
|
|
|
 |
|
|
