09-28-2020, 10:07 PM | #1 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
NW 103TB w/Stock Intake?
How is everyone connecting the OEM intake tube to a NW103TB?
Pictures, details, P/Ns appreciated!
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
10-01-2020, 01:11 PM | #2 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
Answer:
Warm the OEM TB side of the tube and stretch it over the TB, done. Thanks!
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
10-01-2020, 02:45 PM | #3 |
Drives: 2018 ZLE (M6/hyper blue) Join Date: Nov 2015
Location: Lithia, FL
Posts: 762
|
|
10-01-2020, 03:38 PM | #4 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
Have both
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
10-01-2020, 06:00 PM | #5 |
Drives: 2018 ZLE (M6/hyper blue) Join Date: Nov 2015
Location: Lithia, FL
Posts: 762
|
Nice! I was just making sure since your profile only pointed out the ZLE. Wanted to make sure you were asking the right people
|
10-01-2020, 10:41 PM | #6 | |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
Quote:
The OEM TB Tube DOES fit on a NW 103mm TB, once it's heated up and stretched. The OEM hose clamp becomes asthetic at best because its at max/max open, doesn't matter the tube is so tight it isn't leaking in an N/A application.
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
|
10-02-2020, 06:18 AM | #7 | |
Drives: 2018 ZLE (M6/hyper blue) Join Date: Nov 2015
Location: Lithia, FL
Posts: 762
|
Quote:
|
|
|
|
|
|