06-15-2020, 01:26 AM | #1 |
Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Rear Clicking FIXED?
Just a quick update.
I had the rear differential that was clicking pretty bad. Since I was updating the brakes I figured I try to tackle the clicking. I updated with new bearings, rotors, pads, sensors and stainless steel brake lines. I also change out fluid with Amsoil and 2oz(1/2 bottle)of Amsoil lsd additive I really don’t know which cured it but I don’t have any rear differential clunking. My $.02 try the Amsoil w/lsd first. Haha. |
06-15-2020, 02:24 AM | #2 |
Account Suspended
|
My clicking went away when I changed the wheel bearings.
|
06-27-2020, 11:57 AM | #3 |
Drives: '05 C6, '13 1LE, ‘17 2SS Join Date: Oct 2019
Location: Georgia
Posts: 44
|
Now that looks like a fun weekend project... especially if there’s a few cold ones involved!
Curious, which spoiler/wicker bill set up is that? My son is wanting one for his “new to him” 1le. |
06-29-2020, 09:46 AM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
Looks like a ZL1 spoiler with a wicker from ZL1 Addon or Aero Sport Concepts.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-30-2020, 11:08 PM | #5 | |
Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Quote:
It’s a nice piece as they have a sunk in metal casing to bolt in wicker. It’s probably fake carbon fiber plastic as the clear coat is peeling off. It’s a 3 piece with a clear center section. If that helps. |
|
07-05-2020, 01:10 PM | #6 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
Probably ZL1 Add Ons
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-09-2020, 05:15 AM | #7 |
Drives: Camaro SS 1LE (2014) Join Date: Dec 2014
Location: UAE
Posts: 95
|
I had a small axle seal leak and went to get it fixed.
once it was changed, I noticed a click when i would go from reverse and then roll forward in first gear. And another click when i reversed a little again. It was so strange. It turns out they didnt tighten something properly after putting my wheel back on again. Simple fix |
10-23-2020, 02:41 PM | #8 | |
Drives: 1le Join Date: Nov 2015
Location: Texas
Posts: 328
|
Quote:
Hmm, I have this click too and my tire was taken off and put back with no change. |
|
|
|
|
|