06-09-2020, 07:42 AM | #1 |
Drives: 2010 2SS LS3 Join Date: Jun 2016
Location: Active Duty Military
Posts: 54
|
North Florida
Hey fellas/ladies... just got stationed in Jacksonville and I'm looking to see if anyone knows a good shop in North Florida...I know fsp and all but that's way farther drive than im looking for...(yes I know you have to drive sometimes for good shops... I'm not new to this game). Curious to see what's local and if anyone has any experience? All input welcome and thanks!
__________________
LT headers (SW 1 7/8 with high flow cats),
Borla ATAK cat back exhaust CAM (BTR stage 3 blower cam with all supporting mods Lifters, push rods, springs, head bolts, LS2 Timing chain, sprocket, Melling high performance oil pump, gaskets SC (SLP TVS2300), Black wing CAI (designed for SLP SC) JRE super tensioner Fuel system (ZL1pump/ADM control module/ID850 injectors) wheels/tires NGK TR7IX plugs MSD wires ZR1 3 bar map sensor 160° thermostat Crank pin kit |
06-09-2020, 07:43 AM | #2 |
Drives: 2010 2SS LS3 Join Date: Jun 2016
Location: Active Duty Military
Posts: 54
|
South Georgia's open too
__________________
LT headers (SW 1 7/8 with high flow cats),
Borla ATAK cat back exhaust CAM (BTR stage 3 blower cam with all supporting mods Lifters, push rods, springs, head bolts, LS2 Timing chain, sprocket, Melling high performance oil pump, gaskets SC (SLP TVS2300), Black wing CAI (designed for SLP SC) JRE super tensioner Fuel system (ZL1pump/ADM control module/ID850 injectors) wheels/tires NGK TR7IX plugs MSD wires ZR1 3 bar map sensor 160° thermostat Crank pin kit |
06-10-2020, 10:37 PM | #3 |
Drives: 2014 ZL1 Join Date: Jun 2009
Location: Tucson, AZ
Posts: 317
|
I took my car to Tuners Inc there in Jacksonville just to put it on the dyno. Good dude. I didnt get it tuned there (I remote tune with JRE) but I think he's probably the closest to you.
Browning Tuning Performance is in Moultrie, GA too.
__________________
2014 ZL1 M6: Roto Fab Intake, LS3 TB, Long Tube Headers, NPP, Mild 2 Wild, JMS BAP, SMG aux pump, ID 1050X Injectors, DSX Flex Fuel Sensor, 10.5" DSX Lower Pulley, Killer Chiller, Tuned by Ted at JRE, Pedders XA Extreme coilovers, Mickey Thompson Street S/S on Weld S71s
|
10-26-2020, 08:30 AM | #4 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
FSP shut down shop a few years back and moved to TX. Disappointing, bc he was my guy for a while.
I got my last tune at Tuners Inc. Tony seemed like a good guy, but I've still got a CEL that we haven't been able to get rid of after coming back to him once more about it. We looked at all the codes and can't make sense of why the light's on. I'm not sure who else I can try since I'm not a native either, but I've decided I'm back in the market for a tuner as well. |
10-26-2020, 04:17 PM | #5 |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
Ozzy
If codes are not showing you may need to use a GM tech2 scanner. As normal scanners and even HPtuners would not show my bad speed sensors. |
11-14-2020, 09:22 AM | #6 | |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
Quote:
fortunately i think my dad probably still has his tech2 (retired GM tech). |
|
11-14-2020, 09:26 AM | #7 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
oh, for clarification...
when i turn the car ON, i see: P0603 Internal Keep Alive Memory Error P069E Fuel Pump Control Module P0420 Catalyst System Efficiency Below Threshold but when i start the car and clear DTCs the only one that reappears is P0420. which is super weird because that code is disabled in the tune after going turbo. |
12-04-2020, 11:19 AM | #8 | |
Drives: 2011 Camaro SS 6sp Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,905
|
Quote:
If you download the tune from the car with the latest beta version of HPTuners, you'll have the option to read the FPCM. I dont know what you have done to your car, but I dont use my fpcm, but its still connected to report my fuel pressure to the ECM. I had to license the FPCM, in order to Tune out some FPCM related codes. I think one of them was P069E. Basically cost me $50 to not have a CEL.
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes... |
|
12-10-2020, 05:45 PM | #9 | |
Drives: 2015 Camaro SS Join Date: Sep 2011
Location: Jacksonville, Fl
Posts: 713
|
Quote:
__________________
2015 Camaro 2SS Cam/Heads/FBO 498/447 SAE |
|
12-10-2020, 05:46 PM | #10 | |
Drives: 2015 Camaro SS Join Date: Sep 2011
Location: Jacksonville, Fl
Posts: 713
|
Quote:
__________________
2015 Camaro 2SS Cam/Heads/FBO 498/447 SAE |
|
12-10-2020, 05:52 PM | #11 |
Drives: 2015 Camaro SS Join Date: Sep 2011
Location: Jacksonville, Fl
Posts: 713
|
Don't even remember how many pulls we did but Phil spent over 2 hrs with me on the street fixing my tune.
__________________
2015 Camaro 2SS Cam/Heads/FBO 498/447 SAE |
|
|
|
|