new owner cooling mod ?s

[ZMEnow]

Originally Posted by bigti99a

thanks. def going with HX w/ fans and expansion. already have the lower stat and tuned for it. more was looking fluid mixture ideas and the right parts to complement what is already on the car.

anyone care to chime in on clutch/brake bleed? can i bleed the clutch without messing with the brakes since they share the same reservoir? i would like to give it a bleed come spring for peace of mind.

Yes you can bleed the clutch without bleeding the brakes, but you are still topping off in same reservoir. Bleeding the clutch without a speed bleeder is going to be an experience just warning you.


When I replaced my clutch/flywheel I added a Monster speed bleeder so I can hit it anytime. If you have DOT3 you don't need to worry about the brakes unless someone previously had been tracking the car.

[bigti99a]

Yes I am aware of the pain in the ass it is without the speed bleeder. But I won't be adding that until it gets a clutch. So 2 man bleed it is.

Fluid looks super clean in the resivoir. I might not screw with it yet until it gets a little dirty.