![]() |
![]() |
#1 |
![]() ![]() Drives: 2014 2SS/RS Join Date: Jan 2018
Location: Washington
Posts: 848
|
Tire size conundrum. Help me decide.
I have 20x9.5 wheels in the front
And 20x11 wheels in the rear I currently have 275/40 in front And 305/35 in the rear I need to replace my fronts ( one has damage) The 275/40 is slightly taller (mathematically) and I want to get something shorter. What size would you go with? Sent from my SM-N986U using Tapatalk
__________________
2014 2SS/RS LS3/M6
|
![]() |
![]() |
![]() |
#2 |
![]() Drives: 2011 Camaro 2ss Convertible Join Date: Jan 2020
Location: Birmingham alabama
Posts: 52
|
|
![]() |
![]() |
![]() |
#3 | |
![]() ![]() Drives: 2014 2SS/RS Join Date: Jan 2018
Location: Washington
Posts: 848
|
Quote:
There are a ton of variables not to mention the whole ABS system to consider. I just wanted to see of people have been down this road and what they decided. Sent from my SM-N986U using Tapatalk
__________________
2014 2SS/RS LS3/M6
|
|
![]() |
![]() |
![]() |
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
I run a 10" wheel in the front and had 275/40 on them and the driver side rubbed the fenderwell edge, I went with a 275/35 and took care of that problem, also I am lowered 1.25 all 4 corners and run a 315/35 on the rear. Stance is in my sig pic. Hope this helps.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,791
|
I would go up to a 285 as there seem to be tons of those available. If you want to do some digging, you could probably find a 295 that will work for you. You just need to read the specs on tire height min rim width for whatever you are looking at.
You need to stay within about half an inch in height between the front and rears. I think I am running about a 0.8 taller rear right now and I was afraid I was going to throw and ABS code. I run 305/30s on the front with 10" ZL1 wheels and Z28 struts/springs lowered an inch by a strut mod. A lot depends on what you are trying to do as well. HPDE, autox, just for looks
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
![]() |
![]() |
![]() |
#6 |
![]() |
I'm running on Nitto Invo's with 295/35R20 in the front with a 10" wheel with zero issues.
Works great on the road course. I am not lowered tho, so someone sitting lower might rub a bit. |
![]() |
![]() |
![]() |
#7 |
![]() ![]() Drives: 2014 2SS/RS Join Date: Jan 2018
Location: Washington
Posts: 848
|
Excellent information from you all. Thank you
Sent from my SM-N986U using Tapatalk
__________________
2014 2SS/RS LS3/M6
|
![]() |
![]() |
|
|
![]() |
|
|