Paint Diffuser or Not - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1JEWLDSSRS · 04-08-2021, 09:53 AM

Quote:

Originally Posted by CPCNY

Yes I think she'll be sharp. I never intended to keep it this long but now I don't plan on selling it so going to make some changes. I'll keep all the stock parts for the future. I have a few other detail pieces to change. I want the bow ties black so bought some vinyl decals so I'll see how that works. Chevy bow tie center caps for the wheels and new LED DRL bulbs.

One change which I will probably also do are lowering springs but I want to see how it sits after the new wheels are on. It's only money.

Sounds like you have a great plan going! I have been modding mine for 10 years now, and am still not done!! I just bought some CF overlays for the interior from Carbonaddons.com. Gotta get them all put on today before the show tonight. Good luck and enjoy!!

CPCNY · 04-08-2021, 04:44 PM

Ok the front is off. New grill to be installed and splitter off to the paint shop

CPCNY · 04-09-2021, 04:33 PM

ZL1 side skirts showed up today from RPI designs. Beautiful paint and exactly 6 weeks after I ordered them as they told me.

Kajun · 04-09-2021, 07:45 PM

Paint it.

CPCNY · 04-09-2021, 08:02 PM

Quote:

Originally Posted by Kajun

Paint it.

Anvil spoiler...nice. painted mine black

1JEWLDSSRS · 04-09-2021, 08:37 PM

Quote:

Originally Posted by CPCNY

ZL1 side skirts showed up today from RPI designs. Beautiful paint and exactly 6 weeks after I ordered them as they told me.

Very nice!! And you got lucky from RPI, it took me 15 weeks to get my custom painted Z28 front splitter!!

CPCNY · 04-15-2021, 03:01 PM

Just installed the anvil spoiler. I like it. The hardware they sent with it was junk so I bought some neoprene washers to seal the stud holes, neoprene foam strips, nyloc nuts and flat washers.

CPCNY · 04-15-2021, 03:10 PM

The collision shops wanted too much to paint my diffuser and splitter so I'm going to give it a shot. Parts are sanded smooth. Now just waiting for the paint to show up and warmer weather.

steakmaker · 04-15-2021, 05:21 PM

Quote:

Originally Posted by CPCNY

The collision shops wanted too much to paint my diffuser and splitter so I'm going to give it a shot. Parts are sanded smooth. Now just waiting for the paint to show up and warmer weather.

CPCNY; And that's why we have snow in the forecast,Ha,Ha!
Good Luck! I'm right down the road in Cicero, Maybe I'll catch you @ Cars & Coffee,or 3 Rivers or Bella Domani's, when it all starts up again.

CPCNY · 04-15-2021, 05:55 PM

Quote:

Originally Posted by steakmaker

CPCNY; And that's why we have snow in the forecast,Ha,Ha!
Good Luck! I'm right down the road in Cicero, Maybe I'll catch you @ Cars & Coffee,or 3 Rivers or Bella Domani's, when it all starts up again.

80's last week and snow tonight. I need to get out of this state.

1JEWLDSSRS · 04-15-2021, 07:54 PM

CPCNY, That spoiler looks awesome!! Nicely done and that front splitter is like the one I USED to have on mine, painted it gloss black and looked great. Take your time and paint slow and you will be good!!

morepowerjoe · 04-17-2021, 04:47 AM

Looks like everything is coming together for you. I want to do some of the same things to my ride but am trying to get all of the mechanicals done first.

CPCNY · 04-23-2021, 12:12 PM

ZL1 grill installed today.

1JEWLDSSRS · 04-23-2021, 05:45 PM

^^^ woot there it is!!! Lookin good!!

04-08-2021, 04:44 PM	#16
CPCNY Drives: 2010 2SS/RS, VR ext/Blk Int Join Date: Jul 2012 Location: Baldwinsville, NY Posts: 333	Ok the front is off. New grill to be installed and splitter off to the paint shop Attached Images

04-09-2021, 04:33 PM	#17
CPCNY Drives: 2010 2SS/RS, VR ext/Blk Int Join Date: Jul 2012 Location: Baldwinsville, NY Posts: 333	ZL1 side skirts showed up today from RPI designs. Beautiful paint and exactly 6 weeks after I ordered them as they told me. Attached Images

04-09-2021, 07:45 PM	#18
Kajun Drives: 2013 1SS L99 Join Date: Dec 2015 Location: Brandon,MS Posts: 60	Paint it. Attached Images __________________ 2013 1SS/RS L99-GPI VVT SS1 - TSP 1 7/8 headers with Borla Touring exhaust - ESS Tuning YSI V7 - Fore Innovations Dual pump fuel system - 1" BMR lowering springs - BMR toe rods and trailing arms - Prothane rear cradle bushings - Yank 3400 Stall -

04-15-2021, 03:01 PM	#21
CPCNY Drives: 2010 2SS/RS, VR ext/Blk Int Join Date: Jul 2012 Location: Baldwinsville, NY Posts: 333	Just installed the anvil spoiler. I like it. The hardware they sent with it was junk so I bought some neoprene washers to seal the stud holes, neoprene foam strips, nyloc nuts and flat washers. Attached Images

04-15-2021, 03:10 PM	#22
CPCNY Drives: 2010 2SS/RS, VR ext/Blk Int Join Date: Jul 2012 Location: Baldwinsville, NY Posts: 333	The collision shops wanted too much to paint my diffuser and splitter so I'm going to give it a shot. Parts are sanded smooth. Now just waiting for the paint to show up and warmer weather. Attached Images

04-15-2021, 07:54 PM	#25
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 14,043	CPCNY, That spoiler looks awesome!! Nicely done and that front splitter is like the one I USED to have on mine, painted it gloss black and looked great. Take your time and paint slow and you will be good!! __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

04-17-2021, 04:47 AM	#26
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,232	Looks like everything is coming together for you. I want to do some of the same things to my ride but am trying to get all of the mechanicals done first. __________________ DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs Build Thread https://www.camaro5.com/forums/showthread.php?t=609817

04-23-2021, 12:12 PM	#27
CPCNY Drives: 2010 2SS/RS, VR ext/Blk Int Join Date: Jul 2012 Location: Baldwinsville, NY Posts: 333	ZL1 grill installed today. Attached Images

04-23-2021, 05:45 PM	#28
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 14,043	^^^ woot there it is!!! Lookin good!! __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.