05-24-2021, 05:11 PM | #1 |
Drives: 2010 Camaro SS Join Date: Oct 2018
Location: Conway SC
Posts: 70
|
Color hud complete retrofit kit, harness, display, bolts, everything
I just sold my 2010 Camaro SS that I was going to install this in so I no longer need it.
It includes: color hud display with switch hud display bezel 10-12 Camaro 2lt & 2ss hud harness cut out template 10 new screws from GM 5 new nut inserts from GM Located in Conway SC 29526 if you want to pickup. Asking $200 shipped for everything or best offer. Will ship immediately after payment and send tracking info. Any questions, just ask. |
05-24-2021, 09:16 PM | #2 |
Requires programming if I remember correctly?
Thanks Sent from my iPhone using Tapatalk Pro |
|
05-24-2021, 10:12 PM | #3 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,386
|
pretty sure mine was plug and play in 2010
|
05-25-2021, 06:59 AM | #4 |
Drives: 2010 Camaro SS Join Date: Oct 2018
Location: Conway SC
Posts: 70
|
Yes, no programming needed that I'm aware of. There are many threads on here about it and directions about the swap.
Kevin |
05-25-2021, 06:44 PM | #5 |
Drives: 2010 Camaro SS Join Date: Jul 2018
Location: Indiana
Posts: 543
|
SERIOUSLY considering this.....
__________________
2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.
|
05-26-2021, 08:04 PM | #6 |
Drives: 2010 Camaro 2ss/rs, 2008 Avalanche Join Date: Jan 2019
Location: Lake Pannasoffkee,Florida
Posts: 250
|
Is there anything else needed to complete the install in a 2010 2ss/rs m6?
__________________
2010 Rally Yellow 2ss/rs , M6 ,416ci , K1 rods & crank,weisco -3.0cc dome pistons,.040 head gasket, 11.5 compression,1 3/4" LT ,3" pipes w/x-pipe no cats, Cam Motion cam 239/247 113+3 .621"/604" lift , BTR .660 Platinum dual springs w/Titanium retainers, CAI . Stock ls3 heads,intake,injectors & TB. 515rwhp/500rwtq.
|
05-26-2021, 09:55 PM | #7 |
Drives: 2010 Camaro SS Join Date: Oct 2018
Location: Conway SC
Posts: 70
|
I do not believe anything else is needed.
Kevin |
05-27-2021, 05:34 PM | #8 |
Drives: 2010 Camaro 2ss/rs, 2008 Avalanche Join Date: Jan 2019
Location: Lake Pannasoffkee,Florida
Posts: 250
|
Ok thx for the reply, trying to decide if I want to try it with my non hud windshield!
__________________
2010 Rally Yellow 2ss/rs , M6 ,416ci , K1 rods & crank,weisco -3.0cc dome pistons,.040 head gasket, 11.5 compression,1 3/4" LT ,3" pipes w/x-pipe no cats, Cam Motion cam 239/247 113+3 .621"/604" lift , BTR .660 Platinum dual springs w/Titanium retainers, CAI . Stock ls3 heads,intake,injectors & TB. 515rwhp/500rwtq.
|
05-27-2021, 07:16 PM | #9 |
Drives: 2010 Camaro SS Join Date: Oct 2018
Location: Conway SC
Posts: 70
|
From what I have found, hud or non hud windshield makes almost no difference. You can search posts about it on here with comparisons I believe.
Kevin |
05-31-2021, 11:32 PM | #10 |
Drives: 2013 Chevrolet Camaro 2SS/RS Join Date: Jan 2020
Location: Tucson
Posts: 1
|
Why not a 2013?
Will this not work in a 2013 2ss/rs m6?
|
06-01-2021, 04:11 AM | #11 |
Drives: 2010 Chevrolet Camaro SS Join Date: May 2021
Location: Oklahoma City
Posts: 2
|
Is it compatible w the 1ss?
|
06-01-2021, 06:45 AM | #12 |
Drives: 2010 Camaro SS Join Date: Oct 2018
Location: Conway SC
Posts: 70
|
It should work on both of those cars. I'm not an expert however so please double check. Mine was a 2010 2ss/rs m6 so I don't know any differences those would have.
Kevin |
06-01-2021, 08:00 PM | #13 |
Drives: 2010 Camaro SS Join Date: Oct 2018
Location: Conway SC
Posts: 70
|
SOLD!!!
|
|
|
|
|