03-18-2021, 08:11 PM | #15 |
Drives: Chevrolet Camaro Join Date: Aug 2020
Location: Canada
Posts: 3
|
I bought a set of primo dynamic headlights which are very similar to this... there is on plug inside housing for the headlights.. it did come with the same 2 spade to 4 pin connector. Any idea how I control the headlights ?
EDIT - nevermind there was a 2 conductor connector buried inside the light housing. Now my next issue is that the left side and only the left side is hyper flashing when the signal is on. I have LEDs all around the rears are morimoto smoked lights so I assume those all have the proper resistors and such. Last edited by Jnsbanman; 03-19-2021 at 05:23 PM. |
06-23-2021, 07:42 PM | #16 | |
Drives: 2010 Camaro 2SS Join Date: Mar 2018
Location: Bakersfield, CA
Posts: 320
|
Quote:
|
|
06-24-2021, 06:53 AM | #17 |
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 369
|
Yes there is a shutter inside for hi- low beam
|
06-24-2021, 10:27 AM | #18 |
RIP Betsy ( Vitara )
|
Yea that's how it runs on 1 bulb the shutter cuts out 1/2 the light.
__________________
First retrofitted 2014 mylink. |
|
|
|
|