Driveshaft vibration issue - please help - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Silver2014SS · 06-22-2021, 03:37 PM

Does anyone have a diagram or detailed pictures of how the driveshaft should be bolted in?

2014 SS manual trans stock driveshaft
20k miles

We pulled the trans to install a McLeod RXT and I'm getting weird vibration issues. We tried to diagnose on Sunday - vibration was damn near violent at 30 mph. Put back on the lift, unbolted driveshaft, rotated one bolt right, bolted up, drove it - rinse repeat. Settled on a combo where vibration was the most tolerable. But it still does it right around 55 mph.

I've done a lot of searching but haven't found the exact pics/diagram to show how it should be bolted to the trans side and the diff side. Any help is much appreciated!

Shtiggs · 06-25-2021, 12:20 AM

I can take some pic tomorrow when I start my swap.

06-22-2021, 03:37 PM	#1
Silver2014SS Drives: 2014 Chevrolet Camaro SS Join Date: Feb 2021 Location: MN Posts: 36 View My Garage	Driveshaft vibration issue - please help Does anyone have a diagram or detailed pictures of how the driveshaft should be bolted in? 2014 SS manual trans stock driveshaft 20k miles We pulled the trans to install a McLeod RXT and I'm getting weird vibration issues. We tried to diagnose on Sunday - vibration was damn near violent at 30 mph. Put back on the lift, unbolted driveshaft, rotated one bolt right, bolted up, drove it - rinse repeat. Settled on a combo where vibration was the most tolerable. But it still does it right around 55 mph. I've done a lot of searching but haven't found the exact pics/diagram to show how it should be bolted to the trans side and the diff side. Any help is much appreciated!

06-25-2021, 12:20 AM	#2
Shtiggs Drives: 2014 Camaro 2SS Manual Join Date: Feb 2018 Location: Denver Posts: 54	I can take some pic tomorrow when I start my swap.