MRR M017 or Velgen Classic5 Gunmetal

[Crazych66]

Originally Posted by CPCNY

What finish did you buy? They look great on the black car on the Velgen site.

I got the gunmetal. So same as the black car in the first post above.

[1JEWLDSSRS]

Originally Posted by CPCNY

I looked at the BD21s and they are almost identical to the ferradas.

You fit 335s on your car? I crawled under mine and it looks like they shouldn't be a problem. What's the price difference between a 315 and 335?

Yes, I fit 335/30's on my 11.5 Ferrada's on the rear, the offset is +30, I also had them on my M228's which were 11.0 wide and an offset of +43 and still had room behind them about 2.0 inches. I was thinking about maybe putting 345's on the Ferrada's at some point, but when I checked the specs, they are no different than the 335's. The specs for the 335's are, tread width-12.4 and section width,(sidewall)-13.5... The 315's are, tread width-10.9 and section width,(sidewall)-12.6. The price diff is 335 MPSS are 515 each, and only Perrrelli makes them too and about 600 each, and I don't like them, the MPSS in the 315/35 are 310 each, I run the Continental Extreme Contact DWS06 in the 315/35 and are only 275 each, all on Tire Rack. The only reason I have the 335's on my Ferrada's is because the 315's were stretch too much and looked like crap, need something to look the part with the wheel width.

[1JEWLDSSRS]

Originally Posted by Crazych66

I got the gunmetal. So same as the black car in the first post above.

That color is gonna look great on your Camaro..

[CPCNY]

Originally Posted by 1JEWLDSSRS

Yes, I fit 335/30's on my 11.5 Ferrada's on the rear, the offset is +30, I also had them on my M228's which were 11.0 wide and an offset of +43 and still had room behind them about 2.0 inches. I was thinking about maybe putting 345's on the Ferrada's at some point, but when I checked the specs, they are no different than the 335's. The specs for the 335's are, tread width-12.4 and section width,(sidewall)-13.5... The 315's are, tread width-10.9 and section width,(sidewall)-12.6. The price diff is 335 MPSS are 515 each, and only Perrrelli makes them too and about 600 each, and I don't like them, the MPSS in the 315/35 are 310 each, I run the Continental Extreme Contact DWS06 in the 315/35 and are only 275 each, all on Tire Rack. The only reason I have the 335's on my Ferrada's is because the 315's were stretch too much and looked like crap, need something to look the part with the wheel width.

I think I'll stick with 315's at that price difference. And you're correct, not many companies offer 335s.

[1JEWLDSSRS]

Originally Posted by CPCNY

I think I'll stick with 315's at that price difference. And you're correct, not many companies offer 335s.

Yep, good choice. With the 11.0 width the 315's look great on them, and on the car. If you wanted more width in the 315 size, the MPSS is about 1/4th in wider treadwise than the Conti's with the same section width, but with the extra price, not worth it.