6th Gen 1LE Brakes - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

olblue75 · 08-10-2021, 04:18 PM

I was able to score a set of ZL1 front rotor hats and a set of rotors from a Gen6 1LE upgrade kit. Also ordered a set of nuts an bolts from KNS (TQ 120 inlbs)to attach to the hats and new Caliper Bolts from Screaming Chicken(TQ 75 ftlbs)non-torque to yield.
You can see the tools used but I won’t get into removal of wheels, calipers, or actual rotors.
I initially installed the rotors backwards(slots need to face rearward) on the car since these rotors are directional vs the C7 Z06/GS which look the same but are not directional.

olblue75 · 08-10-2021, 04:27 PM

I removed the Caddy CTS-V rotors which have served me well but was time for a change.

olblue75 · 08-10-2021, 04:29 PM

I got these from Pat G from the UK he 3D printed them.

08-10-2021, 04:18 PM	#1
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,155	6th Gen 1LE Brakes I was able to score a set of ZL1 front rotor hats and a set of rotors from a Gen6 1LE upgrade kit. Also ordered a set of nuts an bolts from KNS (TQ 120 inlbs)to attach to the hats and new Caliper Bolts from Screaming Chicken(TQ 75 ftlbs)non-torque to yield. You can see the tools used but I won’t get into removal of wheels, calipers, or actual rotors. I initially installed the rotors backwards(slots need to face rearward) on the car since these rotors are directional vs the C7 Z06/GS which look the same but are not directional. Attached Images __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

08-10-2021, 04:27 PM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,155	Old Rotors I removed the Caddy CTS-V rotors which have served me well but was time for a change. Attached Images __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

08-10-2021, 04:29 PM	#3
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,155	Brake Ducts I got these from Pat G from the UK he 3D printed them. Attached Images __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.