08-09-2021, 01:29 PM | #1 |
|
WTB: ZL1 Caliper Dust Shields
Hi,
I have everything to upgrade my SS brakes to ZL1 brakes, but need the front dust shields. I dont want to cut my factory ones. Anyone have these and looking to sell? AC Delco part numbers: 20944532 20944531 Thanks,
__________________
2010 1SS/RS LS3 M6
Edelbrock E-Force Supercharger, 3.00" Pulley, Roto-Fab CAI, Stainless Power LT Headers, LPE Dual Fuel Pump, ID850's, Custom Grind Cam, Katzkin Leather/Suede Interior 630RWHP mustang dyno. |
08-10-2021, 07:01 PM | #2 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
rock auto or amazon there cheap as dirt
|
08-11-2021, 11:51 AM | #3 |
|
The one part number 20944532 is discontinued. Neither rock auto or amazon has it, why i posted it on here.
__________________
2010 1SS/RS LS3 M6
Edelbrock E-Force Supercharger, 3.00" Pulley, Roto-Fab CAI, Stainless Power LT Headers, LPE Dual Fuel Pump, ID850's, Custom Grind Cam, Katzkin Leather/Suede Interior 630RWHP mustang dyno. |
08-11-2021, 03:52 PM | #4 |
Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,063
|
the one side has been discontinued for a while....maybe a cts v dust shield will work...not sure...i just run it with out them
__________________
Apex VS-5RS Forged Wheels,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 103mm TB, Dr Phil Tune,Borla Atak...955rwhp/967rwtq
|
08-11-2021, 07:18 PM | #5 |
|
From what I can tell, they will not work. Yeah, i want to have the correct ones on my car.
Anyone have them laying around?
__________________
2010 1SS/RS LS3 M6
Edelbrock E-Force Supercharger, 3.00" Pulley, Roto-Fab CAI, Stainless Power LT Headers, LPE Dual Fuel Pump, ID850's, Custom Grind Cam, Katzkin Leather/Suede Interior 630RWHP mustang dyno. |
08-12-2021, 08:55 AM | #6 | |
Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,063
|
Quote:
there have been a few wrecked zl1s on the camaro facebook groups that have been parting out...look for those...but again, i have been running no dust shield and have had zero issues....and trust me i am anal with my car...that one only has 8000 miles, and a 1/4 are track time
__________________
Apex VS-5RS Forged Wheels,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 103mm TB, Dr Phil Tune,Borla Atak...955rwhp/967rwtq
|
|
08-17-2021, 10:42 AM | #7 |
|
Bump, still looking for this.
Thanks,
__________________
2010 1SS/RS LS3 M6
Edelbrock E-Force Supercharger, 3.00" Pulley, Roto-Fab CAI, Stainless Power LT Headers, LPE Dual Fuel Pump, ID850's, Custom Grind Cam, Katzkin Leather/Suede Interior 630RWHP mustang dyno. |
08-18-2021, 05:03 PM | #8 |
Drives: 2015 2ss Join Date: Jun 2009
Location: Carol Stream IL
Posts: 640
|
i have brand new OEM SS dust shields still in wrappings, you're welcome to have them just pay shipping. that way you can cut these up and use to your needs.
shoot me a PM if you're interested
__________________
2015 Camaro 2ss, NicKey Performance built/tuned |
|
|
|
|