1st ever phenolic lid spacer for E-Force - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

COBARO1 · 02-21-2017, 09:28 PM

Tried to find one like they have for LSA blower and nobody makes one. So I had one made myself. Blower definetly whistles more will have to dyno to get new IAT's. Don't know why pictures are not aligned correctly, but you get the idea.

davidscamaro · 02-21-2017, 09:55 PM

Nice!! How thick is the lid spacer?

COBARO1 · 02-21-2017, 10:05 PM

I went all out and it's 1 inch thick. the difference in phenolic price between 1/2 inch and 1 inch was minimal.

Justin87GN · 02-22-2017, 08:19 AM

Quote:

Originally Posted by Clausing

Tried to find one like they have for LSA blower and nobody makes one. So I had one made myself. Blower definetly whistles more will have to dyno to get new IAT's. Don't know why pictures are not aligned correctly, but you get the idea.

Turned out good man! Are you spraying meth before the TB too?

Bigg Tim · 02-22-2017, 08:25 AM

Can the spacers out there used for the headside of the LSAs work for the E-force, or any blower, or are they only for LSA?

Batmanntexas · 02-22-2017, 09:11 AM

Nice!! Interested to see your new numbers....

COBARO1 · 02-22-2017, 09:41 AM

Quote:

Originally Posted by Justin87GN

Turned out good man! Are you spraying meth before the TB too?

yes. I have Alky Control meth with 4 gallon tank in trunk and (2) nozzles. Additionally, I am running RDS lower blower plates and forced induction interchiller. I had to use Detroit engineering solid Motor mounts to get enough clearance and drop motor 1/2 inches.

COBARO1 · 02-22-2017, 09:43 AM

Quote:

Originally Posted by Bigg Tim

Can the spacers out there used for the headside of the LSAs work for the E-force, or any blower, or are they only for LSA?

I don't think so, completely different design. The E-Force has such large runners and different from LSA.
Chris

COBARO1 · 02-22-2017, 09:47 AM

Quote:

Originally Posted by Bigg Tim

Can the spacers out there used for the headside of the LSAs work for the E-force, or any blower, or are they only for LSA?

RDS used to make spacers for the LSA but I believe they quit. However, forced Induction interchillers still make them.
Chris

DIALD_SOCAL_C6 · 02-18-2022, 10:03 AM

Quote:

Originally Posted by COBARO1

RDS used to make spacers for the LSA but I believe they quit. However, forced Induction interchillers still make them.
Chris

Where did you get your spacer made?

02-21-2017, 09:28 PM	#1
COBARO1 Drives: 2011 camaro SS Join Date: Mar 2014 Location: Menifee Ca, United States Posts: 259 View My Garage	1st ever phenolic lid spacer for E-Force Tried to find one like they have for LSA blower and nobody makes one. So I had one made myself. Blower definetly whistles more will have to dyno to get new IAT's. Don't know why pictures are not aligned correctly, but you get the idea. Attached Images

02-21-2017, 09:55 PM	#2
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 856	Nice!! How thick is the lid spacer? __________________ BIG cam ...... 305 45 18 Mickys ...... BMR suspensions

02-22-2017, 09:11 AM	#6
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,395 View My Garage	Nice!! Interested to see your new numbers.... __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi Currently @15-16psi.... COTW 9/8/14

02-21-2017, 10:05 PM	#3
COBARO1 Drives: 2011 camaro SS Join Date: Mar 2014 Location: Menifee Ca, United States Posts: 259 View My Garage	I went all out and it's 1 inch thick. the difference in phenolic price between 1/2 inch and 1 inch was minimal.

02-22-2017, 08:25 AM	#5
Bigg Tim Drives: Chevy SS Join Date: Dec 2015 Location: Phoenix Posts: 17	Can the spacers out there used for the headside of the LSAs work for the E-force, or any blower, or are they only for LSA?