09-01-2022, 11:04 AM | #1 |
Stock driveshaft question
I have 2011 Camaro SS (m6 transmission) with stock two piece driveshaft. I think this was dumb move on my part.. I separated the driveshaft to remove differential and I did not mark both halves. When I was taking things apart, I did not even think of it. Now that I am putting things together, I am concerned that it might not be balanced correctly.
|
|
09-01-2022, 11:31 AM | #2 |
|
Did you separate the two halves or just remove from the trans and diff?
__________________
|
09-01-2022, 11:35 AM | #3 |
I separated both halves of the driveshaft and left transmission in. I only removed rear portion of driveshaft.
|
|
09-01-2022, 01:12 PM | #4 |
|
I'll check my Service Manual tonight, but it seems my memory tells me the factory indexed the two haves. Good thing you left the front shaft in the trans.
__________________
|
09-05-2022, 10:34 AM | #5 | |
Quote:
It does not seem to be indexed for the SS driveshaft. I was able to rotate the rear portion and reinstall. I am hoping that both halves are individually balanced. |
||
|
|
|
|