Can I run this set up staggered…

[chandlerchon]

So I wanted to order some silver Verde Parallax Wheel 20x10 & 20x11 5x120
I want to run 23mm offset for front and 43 mm offset for rear.. BUT on the site it states it’s 27mm for front and 40 mm for rear ??
Help please what do i do still order them or not ?? sorry these would be my first pair of aftermarket wheels as i have the stock wheels set up currently..

[1JEWLDSSRS]

The offset you want to run depends on the design of the wheels, concave or not so much. The widths you are looking at will work just fine. Pic of the wheels??

[chandlerchon]

This is not my vehicle just a review pic and i also wanted the rims in silver and wider width…

[chandlerchon]

Here the wheels I actually want ..

[1JEWLDSSRS]

If the wheels are listed on their website FOR your Camaro, you should be fine with the offsets they offer. They look like a design kinda like the ZL1 wheels. The difference in what you want to run versus what they are offering is less than a quarter of an inch. +23 to +27 on the front, and the +23 is the offset the Z28 rep wheels are, and the rears, +43 to the +40 will be good as well. The +43 is also the offset for the Z28 rep wheels. The ZL1 reps I think are also +23 front and +43 rear. 5mm is just about 1/4 inch. Check this out.

https://www.phastekperformance.com/m...0-2022-camaro/

[chandlerchon]

Originally Posted by 1JEWLDSSRS

If the wheels are listed on their website FOR your Camaro, you should be fine with the offsets they offer. They look like a design kinda like the ZL1 wheels. The difference in what you want to run versus what they are offering is less than a quarter of an inch. +23 to +27 on the front, and the +23 is the offset the Z28 rep wheels are, and the rears, +43 to the +40 will be good as well. The +43 is also the offset for the Z28 rep wheels. The ZL1 reps I think are also +23 front and +43 rear. 5mm is just about 1/4 inch. Check this out.

https://www.phastekperformance.com/m...0-2022-camaro/

Yes it is stated it for a camaro.. but seems pretty vague , if not these wheels then it’s corvette rep wheels or the z28 silver wheels ,, can’t stand black wheels haha

[chandlerchon]

Originally Posted by 1JEWLDSSRS

If the wheels are listed on their website FOR your Camaro, you should be fine with the offsets they offer. They look like a design kinda like the ZL1 wheels. The difference in what you want to run versus what they are offering is less than a quarter of an inch. +23 to +27 on the front, and the +23 is the offset the Z28 rep wheels are, and the rears, +43 to the +40 will be good as well. The +43 is also the offset for the Z28 rep wheels. The ZL1 reps I think are also +23 front and +43 rear. 5mm is just about 1/4 inch. Check this out.

https://www.phastekperformance.com/m...0-2022-camaro/

These are the corvette wheels I wanted

[chandlerchon]

Originally Posted by chandlerchon

These are the corvette wheels I wanted

20x10 20x11 23et 43et

[1JEWLDSSRS]

Originally Posted by chandlerchon

Yes it is stated it for a camaro.. but seems pretty vague , if not these wheels then it’s corvette rep wheels or the z28 silver wheels ,, can’t stand black wheels haha

Well here is a pic of my Camaro with the polished Z28 reps, 20x10 +23 front and 20x11 +43 rears, for your enjoyment! Can't stand black either. lol.

[chandlerchon]

Originally Posted by 1JEWLDSSRS

Well here is a pic of my Camaro with the polished Z28 reps, 20x10 +23 front and 20x11 +43 rears, for your enjoyment! Can't stand black either. lol.

Attachment 1118549

Attachment 1118550

WOW .. what gfx is on ur set up if u don’t mind me asking ??

[1JEWLDSSRS]

Originally Posted by chandlerchon

WOW .. what gfx is on ur set up if u don’t mind me asking ??

lol, thanks. It is one I came up with with different parts available out there because the OEM GFX kit wasn't available anymore. The front splitter is a Z28 replica by RPI Designs, the rockers are OEM ZL1 rockers I got also from RPI Designs, and the rear quarter lower spats I got from Phastek, made by 3D Carbon, but I cant seem to pull them up anymore. Might not be able to get them anymore.

[1JEWLDSSRS]

Originally Posted by chandlerchon

WOW .. what gfx is on ur set up if u don’t mind me asking ??

Hey did some looking and I found those rear lower spats. Man the price went up on them!!

[chandlerchon]

Oh well how long have u had your camaro,, did u do everything at once, did everything by each month focusing on one part or u slow build ?

[1JEWLDSSRS]

Originally Posted by chandlerchon

Oh well how long have u had your camaro,, did u do everything at once, did everything by each month focusing on one part or u slow build ?

I have had my Camaro for 12 years now in May this year. 128.7k on the clock. She has been a long time project in the making with all I have modded on her. I first started out with all the cosmetic mods to the body, wheels and suspension, a little at a time as I could afford, as I was still paying on her. Then came the headers,TB and dyno tune. Then I did the interior a little at a time, still paying on her. The full Katzkins leather was the expensive part, but not too bad. Once I got her all paid for and she was MINE, we went to work on the performance upgrades in the engine and drive train, and here we are. Oh I forgot to post this link earlier for the rear lower spats. Good luck with your journey..

https://3dcarbon.com/collections/che...a743ab81&_ss=c