Help Please - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bottletalk · 03-06-2023, 08:31 PM

try searching in metric

Valkyrie14 · 03-06-2023, 08:50 PM

Quote:

Originally Posted by Danial

What's the Dayco number?

And on another note, most of my industrial clients generally avoid Dayco because of quality control issues. Because of that, I wouldn't use them unless it was all I could find.

I currently have a gates RPM 100”. The next bigger one is a 108”. 100 is a tight fit and when I add the 10% lower it won’t fit. But I don’t think the 10% will be so big that I can use the 108”. When I ran the 6 rib setup a 102” belt worked with room on the tensioner to move it.

What brand would you recommend if I can’t get an RPM?

Valkyrie14 · 03-06-2023, 08:58 PM

Gates Fleetrunner has a 102”, not an RPM but it is a Gates.

bottletalk · 03-06-2023, 08:58 PM

gates green or wait.....or get the dayco and order the gates if u can't wait

bottletalk · 03-06-2023, 09:07 PM

continental oe is a great belt but unsure availability or if they even make an 8 rib.

Valkyrie14 · 03-07-2023, 09:44 AM

Update: I purchased an ATI damper and some extra shims if needed. Getting delivered Friday. I sprang for the flywheel holder this time, last time I pulled the crank pulley it was a battle.

03-06-2023, 08:58 PM	#17
Valkyrie14 Valkyrie14 Drives: Chevrolet Camaro SS Join Date: Mar 2020 Location: Eau Claire, Wisconsin Posts: 962	Gates Fleetrunner has a 102”, not an RPM but it is a Gates. __________________ 2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.

03-07-2023, 09:44 AM	#20
Valkyrie14 Valkyrie14 Drives: Chevrolet Camaro SS Join Date: Mar 2020 Location: Eau Claire, Wisconsin Posts: 962	Update: I purchased an ATI damper and some extra shims if needed. Getting delivered Friday. I sprang for the flywheel holder this time, last time I pulled the crank pulley it was a battle. __________________ 2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.

03-06-2023, 08:31 PM	#15
bottletalk Drives: 15 Camaro 2SS M6 Join Date: Jan 2020 Location: BC Posts: 732	try searching in metric

03-06-2023, 09:07 PM	#19
bottletalk Drives: 15 Camaro 2SS M6 Join Date: Jan 2020 Location: BC Posts: 732	continental oe is a great belt but unsure availability or if they even make an 8 rib.