EOM Retrofit Morimoto HID (possibly LED)

[Leo72793]

Originally Posted by Solders18

Still haven't gotten an invoice. Patiently waiting

all emails were resent to the company. Should be done sometime soon.

[camarojake]

Received the invoice and paid!
Thanks

[Solders18]

Still no invoice :sadface:

[Leo72793]

Originally Posted by Solders18

Still no invoice :sadface:

Check the email you sent me for the invoice.

[Solders18]

Originally Posted by Leo72793

Check the email you sent me for the invoice.

resent email. It looked right but copy and pasted this time. Feel free to send me a message on FB.

[rsrsrs]

Finally paid today.

Now someone link me to headlights ��

[Leo72793]

Originally Posted by rsrsrs

Finally paid today.

Now someone link me to headlights ��

NOT 100% but i believe this is what we will be using:

Theres a few parts we will need:

Projectors (upgrading our stocks):
https://www.morimotohid.com/bi-xenon...s_3?quantity=1

D2S bulbs (because D1S fit differently)
https://www.morimotohid.com/morimoto...lbs?quantity=1

D2S to D1S Adaptors (to reuse OEM ballasts and wiring):
https://www.morimotohid.com/morimoto...s_2?quantity=1

[Leo72793]

Originally Posted by Solders18

resent email. It looked right but copy and pasted this time. Feel free to send me a message on FB.

I will find you on FB

[Solders18]

Boom, Paid!

[camguynj]

Originally Posted by Leo72793

NOT 100% but i believe this is what we will be using:

Theres a few parts we will need:

Projectors (upgrading our stocks):
https://www.morimotohid.com/bi-xenon...s_3?quantity=1

D2S bulbs (because D1S fit differently)
https://www.morimotohid.com/morimoto...lbs?quantity=1

D2S to D1S Adaptors (to reuse OEM ballasts and wiring):
https://www.morimotohid.com/morimoto...s_2?quantity=1

Good info! That and the custom bracket should do it and yes you are correct that ONLY a DS2 bulb will fit the projector as stated in their projector website specs

[SaReNi]

nothing yet on my overpay. thanks.

[Leo72793]

Originally Posted by SaReNi

nothing yet on my overpay. thanks.

Don't fret. I'll handle it

[rsrsrs]

Originally Posted by Leo72793

NOT 100% but i believe this is what we will be using:

Theres a few parts we will need:

Projectors (upgrading our stocks):
https://www.morimotohid.com/bi-xenon...s_3?quantity=1

D2S bulbs (because D1S fit differently)
https://www.morimotohid.com/morimoto...lbs?quantity=1

D2S to D1S Adaptors (to reuse OEM ballasts and wiring):
https://www.morimotohid.com/morimoto...s_2?quantity=1

Hmm not looking forward to doing the adapters. Getting that adaptor in will be a bit of work from what I saw on the driver side. Passenger side there's like no room

[Leo72793]

Originally Posted by rsrsrs

Hmm not looking forward to doing the adapters. Getting that adaptor in will be a bit of work from what I saw on the driver side. Passenger side there's like no room

shouldnt be too hard. it appears to be the same size as the ring on the D1S. Remember too, you can put the cable in on the outside of the headlight or once in.