10-05-2019, 06:46 PM | #1 |
Drives: 13' 1LE Join Date: Apr 2012
Location: Canada
Posts: 2,646
|
Crossmember flanges installed
Here it is. Very happy about this mod. Going to be easy to work on my next cam swap and crank scraper install.
__________________
13' 1LE
Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. |
10-05-2019, 07:08 PM | #2 |
Drives: 2SS/RS L99 BLACK Join Date: Apr 2010
Location: Franklin , MA
Posts: 6,696
|
Nice, clean installation, good quality hardware as well.
|
10-05-2019, 10:46 PM | #3 |
Drives: 13' 1LE Join Date: Apr 2012
Location: Canada
Posts: 2,646
|
Thank you for the parts guys haha
My mechanic has talent for work like this. He dynoed my car 519rwhp just before. It was a cool car day!!
__________________
13' 1LE
Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. |
10-06-2019, 08:00 AM | #4 |
|
Agree with CFD, welds look clean and neat. Did you use anti seize on the bolts?
|
10-06-2019, 06:58 PM | #5 |
Drives: 13' 1LE Join Date: Apr 2012
Location: Canada
Posts: 2,646
|
No anti size..
__________________
13' 1LE
Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. |
11-04-2019, 08:20 PM | #6 |
|
How does one get these quality parts?
-Scott |
11-05-2019, 08:03 AM | #7 |
Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,280
|
|
02-07-2023, 02:49 PM | #8 |
cross member
|
|
02-07-2023, 02:50 PM | #9 |
Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,280
|
see post #7
Then See post #2 |
04-27-2023, 08:08 PM | #10 |
Drives: 2010 Camaro 2ss Join Date: Apr 2023
Location: St Amant La
Posts: 5
|
Does anyone know if the agp turbo kit fits with the plates installed?
|
04-27-2023, 09:57 PM | #11 |
|
I agree looks great.
|
|
|
|
|