What Did You Do To Your Camaro Today? - Page 1895 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blue 13 · 06-16-2023, 09:16 AM

Quote:

Originally Posted by MSgt O

OHHH Do Tell....

She knows about the cage that’s coming. I need to finish the rear seat delete and I’m ordering new lower control arms. I have coil overs on it now and just refinished the drag wheels. I still want to do underglow. I always liked how that looked.

2010sgm · 06-16-2023, 10:49 AM

Quote:

Originally Posted by Blue 13

She knows about the cage that’s coming. I need to finish the rear seat delete and I’m ordering new lower control arms. I have coil overs on it now and just refinished the drag wheels. I still want to do underglow. I always liked how that looked.

Underglow is next on my list...im actively trying to figure out what i want

Eddymel1998 · 06-16-2023, 06:06 PM

I should put underglow on my list as well, looked into doing it as a joke on my pos truck I had before this car but got hung up on weird legal do-s and don't-s in this state.

Bluebagger06 · 06-18-2023, 02:11 PM

Decided to clean up engine bay, Painted the intake cover and strut brace to match wrap, Changed fuel rails and added coil covers! Covers needed some modifying but better than looking at the coils and wires. More to come!

tartagliazl1 · 06-18-2023, 05:03 PM

Me and the wife took the zl1 out to a restaurant on the lake for a few Father’s Day beers at-least i did. I let her drive the zl1 home and half way to the house, she turns to me and says “i love this car” haha looks like i might be getting a procharger c6 earlier than expected lol.

ADVMax · 06-19-2023, 10:23 AM

Borla ATAK cat back system installed Saturday. A day early fathers day gift. Note that the ATAK on stick cats and manifolds is not loud. I was bouncing back and forth between the ATAK and S Type, I would have been disappointed with the S. The ATAK sounds awesome and shouldn’t poss off the neighbors too bad. It sounds like a gen 5 Camaro SS should sound now!

ADVMax · 06-19-2023, 10:28 AM

Also! A couple weekends ago I found some tiny single bulb LEDs I forgot I had. They’re pretty bright for their size. 2 tiny holes in the 2 front insulation clip pockets and hot glued the LEDs in. Routed wire under insulation with hot glue dots to hold it. Tiny RC car plug allows the insulation ti be removed if needed. Used a tiny RC car toggle to power. I have a couple of small mercury switches, thinking about adding one of those so if my dumb ass forgets to switch them off they will go off when the hood closes. It lights up underhood pretty good!

Blue 13 · 06-19-2023, 10:54 AM

That looks great Max.

1JEWLDSSRS · 06-19-2023, 11:18 AM

Quote:

Originally Posted by Bluebagger06

Decided to clean up engine bay, Painted the intake cover and strut brace to match wrap, Changed fuel rails and added coil covers! Covers needed some modifying but better than looking at the coils and wires. More to come!

Oh now we're talking! Looks killer brother!! Get the fuse box cover done to match, and you will be "golden"!!

Love your Camaro sir!

ADVMax · 06-19-2023, 11:37 AM

Quote:

Originally Posted by Blue 13

That looks great Max.

Thank You Sir!

1JEWLDSSRS · 06-19-2023, 11:42 AM

Quote:

Originally Posted by ADVMax

Also! A couple weekends ago I found some tiny single bulb LEDs I forgot I had. They’re pretty bright for their size. 2 tiny holes in the 2 front insulation clip pockets and hot glued the LEDs in. Routed wire under insulation with hot glue dots to hold it. Tiny RC car plug allows the insulation ti be removed if needed. Used a tiny RC car toggle to power. I have a couple of small mercury switches, thinking about adding one of those so if my dumb ass forgets to switch them off they will go off when the hood closes. It lights up underhood pretty good!

Man that lights it up pretty well! I did blue LED's under my strut bar for evening shows, goes well with the RJT, but I don't have a pic. But yeah, that looks good.

Bluebagger06 · 06-19-2023, 06:55 PM

Quote:

Originally Posted by 1JEWLDSSRS

Oh now we're talking! Looks killer brother!! Get the fuse box cover done to match, and you will be "golden"!!

Love your Camaro sir!

Thank you!! Yeah i am going to but ran out of paint lol. Its a work in progress!!

SlowLS1 · 06-19-2023, 07:34 PM

I really like how that turned out. Very creative and fine job!

Would be helpful for a slew of reasons

Quote:

Originally Posted by ADVMax

Also! A couple weekends ago I found some tiny single bulb LEDs I forgot I had. They’re pretty bright for their size. 2 tiny holes in the 2 front insulation clip pockets and hot glued the LEDs in. Routed wire under insulation with hot glue dots to hold it. Tiny RC car plug allows the insulation ti be removed if needed. Used a tiny RC car toggle to power. I have a couple of small mercury switches, thinking about adding one of those so if my dumb ass forgets to switch them off they will go off when the hood closes. It lights up underhood pretty good!

1JEWLDSSRS · 06-20-2023, 10:19 AM

Quote:

Originally Posted by Bluebagger06

Thank you!! Yeah i am going to but ran out of paint lol. Its a work in progress!!

Yep, these Camaros are always a "work in progress", even after 12 years!! lol.

06-16-2023, 06:06 PM	#26519
Eddymel1998 Drives: 2010 Camaro 2SS L99 Join Date: Apr 2023 Location: Olympia, WA Posts: 481	I should put underglow on my list as well, looked into doing it as a joke on my pos truck I had before this car but got hung up on weird legal do-s and don't-s in this state. __________________ Behind every scratch is a story on what not to do, and my car has a lot of stories.

06-18-2023, 02:11 PM	#26520
Bluebagger06 Drives: 2012 camaro ss Join Date: Sep 2018 Location: Illinois Posts: 536	Decided to clean up engine bay, Painted the intake cover and strut brace to match wrap, Changed fuel rails and added coil covers! Covers needed some modifying but better than looking at the coils and wires. More to come! Attached Images __________________ GPI Powered

06-18-2023, 05:03 PM	#26521
tartagliazl1 Drives: 2013 zl1 vert Join Date: Dec 2018 Location: Rochester, New york Posts: 1,170	Me and the wife took the zl1 out to a restaurant on the lake for a few Father’s Day beers at-least i did. I let her drive the zl1 home and half way to the house, she turns to me and says “i love this car” haha looks like i might be getting a procharger c6 earlier than expected lol. __________________ 22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ big gulp 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ cnc,milled ported heads/ brick mod/BMR toe and trailing arms/ 781hp 748 tq SAE @17.3lb on a loaded dyno.

06-19-2023, 10:28 AM	#26523
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	Also! A couple weekends ago I found some tiny single bulb LEDs I forgot I had. They’re pretty bright for their size. 2 tiny holes in the 2 front insulation clip pockets and hot glued the LEDs in. Routed wire under insulation with hot glue dots to hold it. Tiny RC car plug allows the insulation ti be removed if needed. Used a tiny RC car toggle to power. I have a couple of small mercury switches, thinking about adding one of those so if my dumb ass forgets to switch them off they will go off when the hood closes. It lights up underhood pretty good! Attached Images

06-19-2023, 10:54 AM	#26524
Blue 13 3P171 USAF Combat Arms Drives: 2013 SS/RS Join Date: Jul 2021 Location: Olmsted AFB Posts: 416	That looks great Max. __________________ 416ci LS3/Vortech V7/Built 6L80 996.6 RWHP 794.9 RWTQ

06-19-2023, 10:23 AM	#26522
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	Borla ATAK cat back system installed Saturday. A day early fathers day gift. Note that the ATAK on stick cats and manifolds is not loud. I was bouncing back and forth between the ATAK and S Type, I would have been disappointed with the S. The ATAK sounds awesome and shouldn’t poss off the neighbors too bad. It sounds like a gen 5 Camaro SS should sound now!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM