Service Stabilitrack / P0336 crankshaft position sensor code - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Drestar11 · 08-14-2023, 01:27 PM

Hello Everyone, I’m hoping I can get some answers. I have a 2013 Camaro 1LE with 78k miles. Car was driving fine, I get to a stop and the car starts to run rough, all lights came on ( stabilitrack/TC etc.) but the check engine light didn’t come on. Anyways the car ran rough, rpm gauge didn’t work, sounded like it went in safe mode. The car did have this ticking sound under the car. I park the car and a few hours later the car turns on and runs fine without any of the lights on but has the Service Stabilitrack still on the dash and ticking sound still. Car has power and I don’t hear any grinding or mechanical issues besides the ticking underneath the car. I took it to the dealer and they said I need a new engine, but if that is correct the car wouldn’t start, I’ll have leaks or I’ll hear something terribly wrong or some type of smoke but nothing. Any answers would help, I’m picking up the car from the dealer to have the sensor changed at a local Mechanic but any suggestions would be appreciated. I’ll post an update once I get the crankshaft position sensor changed.

Thank You

Andre Estrella

gtstorey · 08-14-2023, 01:45 PM

No way to tell whether you need a new engine from the limited data given. But if the dealer didn't give you any data to back that up, have someone else look at it.

But I also wouldn't have someone just change the CPS. There are several different things to set the code so I would find a good shop and let them diagnose it. If you tell them to change the sensor and that isn't the problem, then it will be on you, not them.

Drestar11 · 08-15-2023, 06:58 AM

Quote:

Originally Posted by gtstorey

No way to tell whether you need a new engine from the limited data given. But if the dealer didn't give you any data to back that up, have someone else look at it.

But I also wouldn't have someone just change the CPS. There are several different things to set the code so I would find a good shop and let them diagnose it. If you tell them to change the sensor and that isn't the problem, then it will be on you, not them.

Thank you for the reply, the dealership didn’t give me anything to go by. Just a list of things I needed and one of them was an engine ��, but I drove it back from the dealership yesterday just fine. Without any codes or anything on the dash. I did take this video as I got home. Hope it helps to give some answers, in the mean time I purchased a crankshaft position sensor which the code came up. I’ll install it and see if it does anything for the ticking. Below is the video.

https://youtube.com/shorts/LajoQFfd8...xmmKMGDwRcLArU

Pkeen · 08-15-2023, 10:16 AM

From the video. It sounds like you have a bad lifter ! Is this an automatic?

08-14-2023, 01:27 PM	#1
Drestar11 Drives: 2013 Camaro SS 1LE Join Date: Sep 2021 Location: New Jersey Posts: 2 View My Garage	Service Stabilitrack / P0336 crankshaft position sensor code Hello Everyone, I’m hoping I can get some answers. I have a 2013 Camaro 1LE with 78k miles. Car was driving fine, I get to a stop and the car starts to run rough, all lights came on ( stabilitrack/TC etc.) but the check engine light didn’t come on. Anyways the car ran rough, rpm gauge didn’t work, sounded like it went in safe mode. The car did have this ticking sound under the car. I park the car and a few hours later the car turns on and runs fine without any of the lights on but has the Service Stabilitrack still on the dash and ticking sound still. Car has power and I don’t hear any grinding or mechanical issues besides the ticking underneath the car. I took it to the dealer and they said I need a new engine, but if that is correct the car wouldn’t start, I’ll have leaks or I’ll hear something terribly wrong or some type of smoke but nothing. Any answers would help, I’m picking up the car from the dealer to have the sensor changed at a local Mechanic but any suggestions would be appreciated. I’ll post an update once I get the crankshaft position sensor changed. Thank You Andre Estrella

08-15-2023, 10:16 AM	#4
Pkeen Drives: 2010 Camaro 2ss/rs, 2008 Avalanche Join Date: Jan 2019 Location: Lake Pannasoffkee,Florida Posts: 252	From the video. It sounds like you have a bad lifter ! Is this an automatic? __________________ 2010 Rally Yellow 2ss/rs , M6 ,416ci , K1 rods & crank,weisco -3.0cc dome pistons,.040 head gasket, 11.5 compression,1 3/4" LT ,3" pipes w/x-pipe no cats, Cam Motion cam 239/247 113+3 .621"/604" lift , BTR .660 Platinum dual springs w/Titanium retainers, CAI . Stock ls3 heads,intake,injectors & TB. 515rwhp/500rwtq.

08-14-2023, 01:45 PM	#2
gtstorey Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017 Location: Huntsville, AL Posts: 2,188	No way to tell whether you need a new engine from the limited data given. But if the dealer didn't give you any data to back that up, have someone else look at it. But I also wouldn't have someone just change the CPS. There are several different things to set the code so I would find a good shop and let them diagnose it. If you tell them to change the sensor and that isn't the problem, then it will be on you, not them.