09-06-2023, 09:39 AM | #1 |
Drives: Chevrolet Camaro ss Join Date: Aug 2019
Location: long island ny
Posts: 18
|
Going rates for Ls3 cam jobs
I recently contacted a local LS shop about doing a cam upgrade in my ls3 camaro... I was quoted 5500$ parts labor and tune... it just seems high to me but is that about right? ... what have others members spent? Any input would be appreciated... but for 5500 stock cam chops pretty good all the sudden lol thank you.
|
09-06-2023, 09:42 AM | #2 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,765
|
Well I paid about that for my L99 cam swap with an LS3 conversion and AFM/DOD delete AND a Melling high volume oil pump! Oh, and a stall converter with trans oil cooler!!
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
09-06-2023, 09:51 AM | #3 |
Drives: Chevrolet Camaro ss Join Date: Aug 2019
Location: long island ny
Posts: 18
|
|
09-06-2023, 09:53 AM | #4 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,765
|
Yes sir! And the extra parts for the conversion and AFM/DOD delete.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
09-06-2023, 11:03 AM | #5 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,846
|
Assuming the shop is up where you're at, that could explain the price delta. Nonetheless, $5500 is a long way toward going FI which works fine with stock cam and can make way more power. There is something to love about NA cars though.
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
09-06-2023, 03:04 PM | #6 |
2&THEHIT
Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018
Location: Garner, NC
Posts: 1,032
|
That's pretty steep. Maybe they quoted high end parts to bound the quote. Should be about $1500 in parts
|
09-06-2023, 05:20 PM | #7 |
Tri-County Camaro SWFL
|
I shopped prior...
Shop 1- "about 6k" Shop 2- 8900 Shop 3- 10100 I wanted 6 bolt heads and a cam. I actually went with the most expensive shop because it was very well known and closest. Shop 1 wanted to use Brodix heads Shop 2 wanted to use Mast heads Shop 3 wanted to use Frankenstein heads
__________________
|
09-06-2023, 07:29 PM | #8 |
Drives: 2014 Camaro SS 1Le Join Date: Feb 2016
Location: IL
Posts: 1,692
|
Paid 2500$ back in 2016
I forgot to mention.. this had a tune included
__________________
2014 SS 1LE Money Pit/ Forged 402
CAM 22X/24X, .619/.617, 113 LSA/ LS9 Heads FIC 1200cc/DSX Aux Pump//McLeod RXT Clutch 730whp: 630Trq Last edited by RupertPupkin; 09-07-2023 at 03:01 PM. |
09-06-2023, 08:03 PM | #9 |
Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020
Location: WNY
Posts: 789
|
Seems high for a LS3. Hypothetically if parts were $1500 that would still leave the shop 40 hrs. @ $100/hr. minus fluids & tune. The shop rate must be stupid high.
__________________
2013 2SS GPI built & tuned 415, spec'd by Andrew Cammer. GPI ported intake/tb/heads, Tooley springs, CHE trunnions, Callies rotating assembly, Diamond pistons, GPI SS3 VVT, ATI 10% ud damper, Circle D 3800, Kooks ceramic coated lt's with green cats, Mishimoto rad & oil cooler, Derale trans cooler, Holley efi rails.
|
09-06-2023, 08:40 PM | #10 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
I had mine done last June;
1200 in labor but probably 5500-6000 in parts. GPI heads an rod mod intake Full -10 AN fuel rails with ZL1 injectors Katech high pressure pump ATI 10% UD pulley/balancer BTR shaft mount rockers with Texas speed full roller rocker Full aluminum radiator E85 Sensor and flow divider from Motion Raceworks ARP Hardware Complete gasket set Comp Cam LS2 dampener 3 bolt cam gear C5.R chain New plugs Johnson slow leak down lifters Retainers and keepers Pushrods Valve springs Fresh fluids Tune Already had headers.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
09-06-2023, 09:44 PM | #11 |
Onyx_Z7 <— Instagram
Drives: 2013 2ss 1le Join Date: Aug 2014
Location: Delaware
Posts: 634
|
Think I paid $1500 parts and labor with just cam and springs
__________________
427 Dart block, M311 Heads, Pat G Custom Cam, ATI Balancer, BO White Stage 3 TB, Custom CAI, FI Tech Sheet Metal Manifold
|
09-07-2023, 06:30 AM | #12 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 828
|
I did the labor myself, but I can tell you as I'm getting ready to refresh some items, the prices of parts have increased 50-75% in the last 2-3 years.
For example, I bought Johnson 2110R lifters for $450 and now they're closer to $775. Makes it kinda hard to budget based on previous experiences. Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
09-07-2023, 06:57 AM | #13 |
Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020
Location: WNY
Posts: 789
|
OP, I would contact Andrew Cammer here & have him price a package for you. He will give you an honest evaluation on what is the best setup for your application & how you will drive the car. I am mostly street with some strip in the future. I could not be happier with the results.
__________________
2013 2SS GPI built & tuned 415, spec'd by Andrew Cammer. GPI ported intake/tb/heads, Tooley springs, CHE trunnions, Callies rotating assembly, Diamond pistons, GPI SS3 VVT, ATI 10% ud damper, Circle D 3800, Kooks ceramic coated lt's with green cats, Mishimoto rad & oil cooler, Derale trans cooler, Holley efi rails.
|
09-07-2023, 09:09 AM | #14 | |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,765
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|
|