What Did You Do To Your Camaro Today? [v2 thread] - Page 47 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1JEWLDSSRS · 11-07-2023, 07:50 PM

Quote:

Originally Posted by Detleg

Got an Alignment done today, wasn't off that bad beside rear driver side.
Did a rear Bow Tie Delete

Greased all fitting besides rear sway bar, I will change out the fittings to a either 45 or 90 degree elbow one, should have done it before but didn't have the correct grease. Started to paint the front SS emblem , all I got left is fill the inside with black, probably using a syringe for it, don't know yet.
My Center Brace sits perfect

Absolutely fantastic!! Really diggin that shiny exhaust!! I need to get mine on a lift for a bit and do a polish on it. Looks killer..

SlowLS1 · 11-08-2023, 07:06 AM

Quote:

Originally Posted by 1JEWLDSSRS

lol. I hear ya on that one!! But at least you got a good start on it. Just be careful!! I also love how you used "protection", lol, on the front end. We did the same when we did my cam swap. Cheers my brother!!

Better safe than sorry

Quote:

Originally Posted by George-CZ

After two months of waiting for a custom driveshaft finally the first ride with the Tetemec TKX after replacing it with a TH350.

A car from another world!

That car is amazingly clean. Hardly ever see those cars on the road anymore. I bet you get a ton of attention with her!

Quote:

Originally Posted by Detleg

Got an Alignment done today, wasn't off that bad beside rear driver side.
Did a rear Bow Tie Delete

Greased all fitting besides rear sway bar, I will change out the fittings to a either 45 or 90 degree elbow one, should have done it before but didn't have the correct grease. Started to paint the front SS emblem , all I got left is fill the inside with black, probably using a syringe for it, don't know yet.
My Center Brace sits perfect

Looking good!
I also did the Bow Tie delete, but my 2010 has the holes. I have looked high and low for that SS badge and they don't make them anymore. It's gonna look great on there!

Arogg · 11-08-2023, 07:16 AM

Quote:

Originally Posted by SlowLS1

Looking good!
I also did the Bow Tie delete, but my 2010 has the holes. I have looked high and low for that SS badge and they don't make them anymore. It's gonna look great on there!

I have an early 2010 with the holes also. Thats the only reason I havent removed my bowtie

Infidel67 · 11-08-2023, 09:38 AM

Quote:

Originally Posted by 1JEWLDSSRS

Absolutely fantastic!! Really diggin that shiny exhaust!! I need to get mine on a lift for a bit and do a polish on it. Looks killer..

Thanks Brother, will take it out this Saturday to a show with Leadslead from here

Quote:

Originally Posted by SlowLS1

Looking good!
I also did the Bow Tie delete, but my 2010 has the holes. I have looked high and low for that SS badge and they don't make them anymore. It's gonna look great on there!

Thanks Bud, but hey I just bought it on Amazon for like $35
https://a.co/d/ctvdRoG

Quote:

Originally Posted by Arogg

I have an early 2010 with the holes also. Thats the only reason I havent removed my bowtie

I wasn't sure if I had the holes or not, so I used Goof Off and a Heat Gun very carefully and slow, no fishing line or anything like that and popped right off without nasty rubber on the back, the fishing line trick is not a good hack.

The_bald_eagle_machine · 11-08-2023, 10:28 AM

Installed my billet option fuel door that I plastidipped satin black. Compliments the rest of my black trim mods nicely.

Infidel67 · 11-08-2023, 10:55 AM

Looks good Bro

The_bald_eagle_machine · 11-08-2023, 11:02 AM

Plastidip is a really solid way to accent paint stuff. If you do it right and apply 5-6 coats like the directions state. The paint holds REALLY well. Definitely looks really good with the billet option door. Sometimes the small mods make a really big difference.

Infidel67 · 11-08-2023, 11:17 AM

Yes Sir, that's how I got away with the chrome on the diffuser

1JEWLDSSRS · 11-08-2023, 11:19 AM

Quote:

Originally Posted by The_bald_eagle_machine

Plastidip is a really solid way to accent paint stuff. If you do it right and apply 5-6 coats like the directions state. The paint holds REALLY well. Definitely looks really good with the billet option door. Sometimes the small mods make a really big difference.

That looks really nice!! And yes, sometime less is more!

Aqua Blue RS/SS · 11-08-2023, 11:25 AM

Quote:

Originally Posted by The_bald_eagle_machine

Installed my billet option fuel door that I plastidipped satin black. Compliments the rest of my black trim mods nicely.

Hey! same view different color lol. Mine goes perfect with my black stripes

1JEWLDSSRS · 11-08-2023, 11:28 AM

Quote:

Originally Posted by Aqua Blue RS/SS

Hey! same view different color lol. Mine goes perfect with my black stripes

Dang, yes sir it does!! Cool... Makes me want one, but I like the nice smooth look of the stock door in the RJT car color..

Infidel67 · 11-08-2023, 11:35 AM

Mine is a bit off-center but not sticking out.

1JEWLDSSRS · 11-08-2023, 11:37 AM

Quote:

Originally Posted by Detleg

Mine is a bit off-center but not sticking out.

That's pretty cool too!! Haven't seen that yet.

Aqua Blue RS/SS · 11-08-2023, 12:20 PM

I think the weight of them causes them to sag a bit on the hinges, mine is very slightly off center as well.

Just thought to myself, three bad ass GM dovetail shots! Nice taste guys!

11-08-2023, 10:28 AM	#649
The_bald_eagle_machine Anthony S Drives: 2011 chevrolet camaro 2ss/rs Join Date: Apr 2021 Location: Chiefland, FL Posts: 1,001	Installed my billet option fuel door that I plastidipped satin black. Compliments the rest of my black trim mods nicely. Attached Images __________________ Follow me on instagram @Cthulu_the_trans_am https://www.camaro5.com/forums/showthread.php?t=600181 2011 Camaro 2SSRS - Sold No longer a 5th gen owner, but still an enthusiast. Ask me about my Front crash bars!

11-08-2023, 10:55 AM	#650
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 885 View My Garage	Looks good Bro __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-08-2023, 11:02 AM	#651
The_bald_eagle_machine Anthony S Drives: 2011 chevrolet camaro 2ss/rs Join Date: Apr 2021 Location: Chiefland, FL Posts: 1,001	Plastidip is a really solid way to accent paint stuff. If you do it right and apply 5-6 coats like the directions state. The paint holds REALLY well. Definitely looks really good with the billet option door. Sometimes the small mods make a really big difference. __________________ Follow me on instagram @Cthulu_the_trans_am https://www.camaro5.com/forums/showthread.php?t=600181 2011 Camaro 2SSRS - Sold No longer a 5th gen owner, but still an enthusiast. Ask me about my Front crash bars!

11-08-2023, 11:17 AM	#652
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 885 View My Garage	Yes Sir, that's how I got away with the chrome on the diffuser __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-08-2023, 11:35 AM	#656
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 885 View My Garage	Mine is a bit off-center but not sticking out. Attached Images __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-08-2023, 12:20 PM	#658
Aqua Blue RS/SS Drives: ABM #93 Join Date: Oct 2018 Location: Lotaburger Posts: 3,188	I think the weight of them causes them to sag a bit on the hinges, mine is very slightly off center as well. Just thought to myself, three bad ass GM dovetail shots! Nice taste guys! __________________ ABM #2399 2SS/RS:SOLD ABM #93 2SS/RS Black Rally stripes, Titanium Interior 4,000 miles: GM GFX side skirts and diffuser waiting on paint, GM dovetail, GM heritage, RPI ZL1 style splitter. ‘87 IROC-Z Iroc blue. all original unmolested with 50K miles.