WTB OEM front bumper cover and grills

[gm5778]

Guys I am looking for an OEM front bumper cover, grills and associated hardware and pieces that go with it. I have a splitter but need just about everything else. Please let me know if you have some or all of these parts or know where to get them

[aris]

I believe the bumper cover itself is the same as a base Camaro. You'll also need the fender flares.


Anderson Composites has aftermarket CF fender flares if you're unable to find the OEM pieces.

[gm5778]

Originally Posted by aris

I believe the bumper cover itself is the same as a base Camaro. You'll also need the fender flares.


Anderson Composites has aftermarket CF fender flares if you're unable to find the OEM pieces.

Im aware of Anderson, very cool CF parts. Huh, didn't know it was a standard base part. Are the grills the same too?

[NoDakZ/28]

EDIT: Front bumper IS a different part number than SS but fenders and the lower grille and fog light bezel are, but upper grille obviously is different and the fog light bezel has a cap.

[gm5778]

Originally Posted by NoDakZ/28

Front bumper and fenders are the same as is the lower grille and fog light bezel, but upper grille obviously is different and the fog light bezel has a cap.

Thank you! Can't believe I missed that.

[NoDakZ/28]

Originally Posted by gm5778

Thank you! Can't believe I missed that.

Wherever you get the splitter at, make sure they have the "f" brackets included.

[Mouse330]

Front bumper cover is discontinued #22997723, No one in the country shows one available.

[NoDakZ/28]

Originally Posted by Mouse330

Front bumper cover is discontinued #22997723, No one in the country shows one available.

If amazon has them I'm sure others do...
https://www.amazon.com/Go-Parts-Bump...ve%2C99&sr=1-1

[bsn]

Thats an aftermarket bumper cover, I would rather use a used OEM cover than a new aftermarket.

[NoDakZ/28]

Originally Posted by bsn

Thats an aftermarket bumper cover, I would rather use a used OEM cover than a new aftermarket.

Like stated above, they are discontinued by gm. Yes you can find used, or someone who has one sitting in a box. Chances are that's going to be pretty tough to come by. Nothing wrong with new aftermarket if you have no choice.

[Mouse330]

Originally Posted by NoDakZ/28

If amazon has them I'm sure others do...
https://www.amazon.com/Go-Parts-Bump...ve%2C99&sr=1-1

I'm talking about OEM not aftermarket

[gm5778]

At this point I'll be ok settling for an aftermarket one. OEM is impossible to get it seems. I crashed my Z back in April (below freezing temps and Trofeo Rs don't mix) and need one so I'll take what I can get. I track it a lot so the bumper cover gets beat up anyway, at least now I don't feel bad anymore!

[aris]

Originally Posted by NoDakZ/28

EDIT: Front bumper IS a different part number than SS but fenders and the lower grille and fog light bezel are, but upper grille obviously is different and the fog light bezel has a cap.

I would be willing to bet that the only difference is the Z/28 specific part number has little holes drilled in it for the fender flares. I've noticed that a lot of the factory Z/28 parts are just modified ZL1 or SS parts.

[NoDakZ/28]

Originally Posted by aris

I would be willing to bet that the only difference is the Z/28 specific part number has little holes drilled in it for the fender flares. I've noticed that a lot of the factory Z/28 parts are just modified ZL1 or SS parts.

I believe you are correct.