Looking For Someone in The Middle TN Area to do "Cut Fix" for Blend Door - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RedRockMan · 12-04-2025, 01:27 PM

The HVAC blend door has finally broken on my 2015 2LS. I can hear the actuator moving when I adjust the temperature, but it makes no difference in the air temperature. The air is also warmer on the driver's side than on the passenger side, which seems to be a typical sympton of the door breaking near the actuator.

I don't want to spend the money to have the dash removed and am looking for someone who has done the job before. I'm in the Murfreesboro area but would be willing to take it to Nashville if necessary. Does anyone have any recommendations?

TIA

RedRockMan · 12-05-2025, 09:52 AM

Some Luck with Blend Door "Cut Fix" - TN
I called a (very) good independent mechanic here in Murfreesboro, TN (near Nashville) who changed my rotors/pads a few months ago, and he's willing to give it a go. It's going to be a couple of weeks before I have the time to get it to him because of family issues, but if it all works out I'll reply again and will pass his info along to anyone who requests it.

Thanks to all of the people who have posted about this issue over the years, and to those who made the YouTube videos showing how to do it.

12-04-2025, 01:27 PM	#1
RedRockMan Drives: 2015 Camaro 2LS, 1997 Z28 30th ed. Join Date: May 2019 Location: Tennessee Posts: 35	Looking For Someone in The Middle TN Area to do "Cut Fix" for Blend Door The HVAC blend door has finally broken on my 2015 2LS. I can hear the actuator moving when I adjust the temperature, but it makes no difference in the air temperature. The air is also warmer on the driver's side than on the passenger side, which seems to be a typical sympton of the door breaking near the actuator. I don't want to spend the money to have the dash removed and am looking for someone who has done the job before. I'm in the Murfreesboro area but would be willing to take it to Nashville if necessary. Does anyone have any recommendations? TIA

12-05-2025, 09:52 AM	#2
RedRockMan Drives: 2015 Camaro 2LS, 1997 Z28 30th ed. Join Date: May 2019 Location: Tennessee Posts: 35	Some Luck with Blend Door "Cut Fix" - TN I called a (very) good independent mechanic here in Murfreesboro, TN (near Nashville) who changed my rotors/pads a few months ago, and he's willing to give it a go. It's going to be a couple of weeks before I have the time to get it to him because of family issues, but if it all works out I'll reply again and will pass his info along to anyone who requests it. Thanks to all of the people who have posted about this issue over the years, and to those who made the YouTube videos showing how to do it.