You are browsing camaro5 
 |
|
06-21-2023, 09:17 AM
|
#1 |
|
Kunch
Drives: 2010 Camaro 2SS L99 Silver Ice Mett Join Date: May 2013
Location: Milford, De
Posts: 113
|
2010 GM Front Lip
Hey does anyone know where I can buy just the front lip for the GM Body Kit? The Camaro I bought came with the Sides and the rear already installed but not the front. I found it on KBD but its just a 3M double sided tape stick on application and I want something more permanent. Does anyone have any experience with the KBD kits? If I cant find a GM one that my be my only option.
__________________
 ^^^^ This is my old car, Haven't made new signature pic yet, but Check out its old build thread My Build Thread |
|
|
|
06-21-2023, 11:54 AM
|
#2 |
            
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 14,043
|
Just a heads up, you will NOT find a GM one! Unless you find someone that has one AND is willing to part with it. They aren't made anymore, and the entire kit. You may just have to get that one and do a "custom" install on it to secure it to the front fascia, or purchase some other splitter that you like. Good luck sir! Nice purchase by the way.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
 |
|
|
|
|
06-21-2023, 12:07 PM
|
#3 |
|
Kunch
Drives: 2010 Camaro 2SS L99 Silver Ice Mett Join Date: May 2013
Location: Milford, De
Posts: 113
|
Thanks yeah the more I look the more I am realizing that they are insanely hard to find. I love the look of the GM bodykit and I havent really found any that I like the looks of as much as that one. I will just have to get the KBD front lip and like you said make a more permanent custom installation for it.
__________________
^^^^ This is my old car, Haven't made new signature pic yet, but Check out its old build thread My Build Thread |
|
|
|
|
06-22-2023, 01:52 PM
|
#4 | |
|
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 14,043
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|
|
06-22-2023, 04:53 PM
|
#5 |
|
Kunch
Drives: 2010 Camaro 2SS L99 Silver Ice Mett Join Date: May 2013
Location: Milford, De
Posts: 113
|
Yeah that is my fear, I watched a video of someone installing the GM splitter and it was solid after it was put on with all the mounting hardware. With the KBD one I am not really thrilled with the idea of putting double sided VHB tape on the car as a means of holding it on the car. I believe in doing things once the right way rather then twice the wrong way so I am gonna keep looking around.
Does anyone have any suggestions for splitters that are readily available that are top quality that look good with the factory kit?
__________________
^^^^ This is my old car, Haven't made new signature pic yet, but Check out its old build thread My Build Thread |
|
|
|
|
07-01-2023, 09:03 PM
|
#6 |
 Drives: 2010 Camaro 2SS/RS Join Date: Feb 2023
Location: Md
Posts: 7
|
I went with an ACS T4 front splitter with the undertray.
To me it seems.like the best option simce gm's are discontinued. It's composite, not plastic. With the undertray it adds hardware front and rear, which you have drop the front clip for 6 of the screws. |
|
|
|
|
07-15-2023, 06:39 PM
|
#7 |
Drives: 2011 Camaro 2SS/RS Join Date: Jul 2021
Location: McKinney, TX
Posts: 517
|
These guys have a reproduction of it. Not sure how good it is and it mounts a little different, but looks pretty similar. https://www.kbdbodykits.com/
|
|
|
|
|
07-16-2023, 02:47 PM
|
#8 |
Drives: ABM #93 Join Date: Oct 2018
Location: Lotaburger
Posts: 3,188
|
If you go the KBD route I’d be interested in your experience with it. I’ve contemplated there GFX side skirts, eventually I want to run them again on my car but they don’t show up very much these days. Kbd does make them but I’m Leary of the the fit, finish etc. of them.
|
|
|
|
|
07-16-2023, 08:22 PM
|
#9 |
Drives: 2012 Camaro 2SS/RS Vert LS3/M6 Join Date: Aug 2021
Location: Cheboygan, Michigan
Posts: 916
|
I have an SLP one painted gloss black I will sell you for cheap! I went with an ACS as well...going in a different direction now with my car. It bolts on as well.
|
|
|
|
|
08-15-2024, 08:44 AM
|
#10 |
|
Drives: Chevy Camaro ss 2010 Join Date: Oct 2023
Location: Columbia Tn
Posts: 15
|
Did you go with the KBD , I have been looking at them and IKON but can't find much info on either one
|
|
|
|
|
Yesterday, 11:53 AM
|
#11 | |
 
Drives: 2011 chevy camaro 2ss rs convertibl Join Date: Jan 2026
Location: seattle, wa
Posts: 3
|
Question about front splitter
Quote:
Hi everyone, new member here, how's it going. Hope it's ok to post in this 2023 thread. I have similar question. My car originally had side skirt/ front lip options etc, splitter part # 22945060, and I need a new one. No OEM available, and my searching has also led to the KBD as looking like best bet. My plan would be to use the 3m tape to get everything set up, then actually bolting it on through underside of bumper. The KBD looks most like factory OEM as far as I can tell. Anyone actually tried buying one of these? thanks! nate |
|
|
|
|
|
Yesterday, 12:18 PM
|
#12 |
|
Drives: 2011 chevy camaro 2ss rs convertibl Join Date: Jan 2026
Location: seattle, wa
Posts: 3
|
front lip / splitter options
So that pic above is the KBD replica lip, on sale 200$, and this pic is an ebay similar looking part, 129$, they seem to be almost exact. I like on these styles that it is one piece and has the tray that goes quite a ways under the bumper, for more area to put in fasteners of some kind....
__________________
Last edited by seattle 2ss RS; Yesterday at 12:19 PM. Reason: rewriting a sentence didn't make sense |
|
|
|
|
Yesterday, 09:55 PM
|
#13 | |
 Drives: 2014 Chevrolet Camaro 2SS RS Join Date: Aug 2024
Location: IL
Posts: 59
|
Quote:
|
|
|
|
|
|
|
|
|
 |
|
|
