SS Exhaust Tip Diameter? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sen10l · 11-18-2009, 05:45 PM

I'm doing research ahead of delivery on cosmetic exhaust tips. I think the stock ones are almost invisible due to it blending in to the rear fascia.

So - what is the diameter of the stock SS Exhaust tip for fitment of an aftermarket tip? Thanks!

hd48 · 11-18-2009, 06:13 PM

Hey Ijust cut my exhaust off the rear but not where it would void the warranty, i installed slp loud mouth tips and rear pipe. They are 4inch tips and they run into 3inch exhaust.Hope that helps. Rob

sen10l · 11-18-2009, 06:24 PM

In other words, I should look at aftermarket tips with a 3" fitment? thanks!

THUMPER20X · 11-18-2009, 07:37 PM

Quote:

Originally Posted by sen10l

In other words, I should look at aftermarket tips with a 3" fitment? thanks!

Magnaflow makes some 3-1/2 " that fit perfectly and look better than stock, angle cut double wall. Look and fit perfect. You could squeeze a 4" tip in there if your exhaust guy knows what hes doing. The opening is 4-1/2 Inches IIRC

THUMPER20X · 11-18-2009, 07:46 PM

Heres some pics with the Moroso Spiral Flow muffflers. Whole axleback system cost 300 installed and they welded flanges to everything so I can put back to stock in about 20mins.
This system will hold me over till I get the long awaited Hooker Super Comps, and run a 3" system all the way back with and X-Pipe

sen10l · 11-18-2009, 09:07 PM

Quote:

Originally Posted by THUMPER20X

Magnaflow makes some 3-1/2 " that fit perfectly and look better than stock, angle cut double wall. Look and fit perfect. You could squeeze a 4" tip in there if your exhaust guy knows what hes doing. The opening is 4-1/2 Inches IIRC

I'm sorry - I'm still confused. What's the diameter of the stock SS exhaust tips? Seems like you're saying it's 4.5 inches but a 3.5 inch one can fit? I don't need to know what's the opening of aftermarket tips, only the stock tip so when I look at a catalog I know which sizes of aftermarket tips to filter that will fit over the stock tip. Thanks.

THUMPER20X · 11-19-2009, 01:13 AM

3-1/2 but 4" will work. The stock ones are 3"

AmericanV8 · 11-19-2009, 11:02 AM

Quote:

Originally Posted by THUMPER20X

Heres some pics with the Moroso Spiral Flow muffflers. Whole axleback system cost 300 installed and they welded flanges to everything so I can put back to stock in about 20mins.
This system will hold me over till I get the long awaited Hooker Super Comps, and run a 3" system all the way back with and X-Pipe

Hey THUMPER20X is this a kit the Moroso makes for the Camaro??? Or did you buy the mufflers and had a shop custom fit the piping??

It looks friggin good man! I'm very interested in doing the samething for $300 bucks!

Oh ya, how's the sound?? Any powergains noticeable?? Thanks!

sen10l · 11-19-2009, 11:41 AM

Quote:

Originally Posted by THUMPER20X

3-1/2 but 4" will work. The stock ones are 3"

okay - so I should look at aftermarket tips that are 3.5" or more, because the stock tip is 3". Got it. Thanks!!

THUMPER20X · 11-19-2009, 10:50 PM

Quote:

Originally Posted by AmericanV8

Hey THUMPER20X is this a kit the Moroso makes for the Camaro??? Or did you buy the mufflers and had a shop custom fit the piping??

It looks friggin good man! I'm very interested in doing the samething for $300 bucks!

Oh ya, how's the sound?? Any powergains noticeable?? Thanks!

Totally made up!. Sounds awesome, I still have to post a vid. everyone thinks theyre cherrybombs lol. Heres some pics with exhaust and the MPD wing

AmericanV8 · 11-20-2009, 09:50 AM

Cool man!! Do you feel any significant power gains?? I was looking into a muffler delete option but this is much more economical for me. I'll post pics when i get it done.
TPW 11/30 wooohooo!!

THUMPER20X · 11-20-2009, 05:56 PM

Quote:

Originally Posted by AmericanV8

Cool man!! Do you feel any significant power gains?? I was looking into a muffler delete option but this is much more economical for me. I'll post pics when i get it done.
TPW 11/30 wooohooo!!

Nope lol. Just sounds like an 8 now instead of an inline 6. Im pretty sure the only real gains would be by doing headers back. The bottleneck is definitely in the manifolds.

RickRay · 11-20-2009, 06:08 PM

Solos are 4 1/2 inches....and fit just perfect..

11-18-2009, 05:45 PM	#1
sen10l Drives: In Transit Join Date: Nov 2009 Location: North Pole Posts: 334	SS Exhaust Tip Diameter? I'm doing research ahead of delivery on cosmetic exhaust tips. I think the stock ones are almost invisible due to it blending in to the rear fascia. So - what is the diameter of the stock SS Exhaust tip for fitment of an aftermarket tip? Thanks!

11-18-2009, 06:13 PM	#2
hd48 Drives: SS2 Rally Yellow Lt Grey Leath Join Date: Mar 2009 Location: Cape Coral,FL Posts: 184	tips Hey Ijust cut my exhaust off the rear but not where it would void the warranty, i installed slp loud mouth tips and rear pipe. They are 4inch tips and they run into 3inch exhaust.Hope that helps. Rob

11-18-2009, 07:46 PM	#5
THUMPER20X GM fix my PAINT U suck! Drives: 2010 Black 1SS/RS 6Spd Join Date: Sep 2009 Location: Great Red North Posts: 1,856	Heres some pics with the Moroso Spiral Flow muffflers. Whole axleback system cost 300 installed and they welded flanges to everything so I can put back to stock in about 20mins. This system will hold me over till I get the long awaited Hooker Super Comps, and run a 3" system all the way back with and X-Pipe __________________

11-19-2009, 01:13 AM	#7
THUMPER20X GM fix my PAINT U suck! Drives: 2010 Black 1SS/RS 6Spd Join Date: Sep 2009 Location: Great Red North Posts: 1,856	3-1/2 but 4" will work. The stock ones are 3" __________________

11-20-2009, 06:08 PM	#13
RickRay INJACC Drives: 2010 CGM 2LT/RS AUTO Join Date: Jan 2009 Location: Montreal (South Shore)Quebec, Canada Posts: 6,519 View My Garage	Solos are 4 1/2 inches....and fit just perfect.. Attached Images Last edited by RickRay; 11-20-2009 at 09:09 PM.

11-18-2009, 06:24 PM	#3
sen10l Drives: In Transit Join Date: Nov 2009 Location: North Pole Posts: 334	In other words, I should look at aftermarket tips with a 3" fitment? thanks!

11-20-2009, 09:50 AM	#11
AmericanV8 Drives: 2010 Camaro SS, Chrysler 300 SRT8 Join Date: Oct 2009 Location: California Posts: 160	Cool man!! Do you feel any significant power gains?? I was looking into a muffler delete option but this is much more economical for me. I'll post pics when i get it done. TPW 11/30 wooohooo!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-04-2010 11:49 PM
Camaro SS Axle Back Exhaust from MRT Performance	Blueclyde	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	29	07-07-2010 03:44 PM
upgraded exhaust for SS	wstuarttn	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	4	09-10-2009 08:42 PM
SS exhaust rumble, #32351	myold88	5th Gen Camaro SS LS LT General Discussions	19	08-24-2009 03:58 PM
SS Exhaust #'s	SSCamaro2010	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	3	07-06-2009 07:37 AM