New Exhaust!! WOOT! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

scrming · 11-19-2009, 06:20 PM

Sounds good! Sound is a bit on the thinner side... but still sounds good and the main thing is you are happy with it!

mrray13 · 11-19-2009, 06:21 PM

Quote:

Originally Posted by radz282003

I like if after it gets through the rasp. Please forgive me, but it reminds me of like some exotics I've heard. Sounds good though

Certainly better than stock

I agree, the raspiness it has to lend itself to certain "exotic" type sound. It's liveable though, and as the motor winds up, lol...wheeee!

Idle has a good note as well. We'll see what happens with some miles on the car/exhaust and hopefully the addition of JBA shorties!!

scrming · 11-19-2009, 06:30 PM

Quote:

Originally Posted by mrray13

I agree, the raspiness it has to lend itself to certain "exotic" type sound. It's liveable though, and as the motor winds up, lol...wheeee!

Idle has a good note as well. We'll see what happens with some miles on the car/exhaust and hopefully the addition of JBA shorties!!

once things season a bit, the rasp should tone down a bit...

kcamarom · 11-19-2009, 09:13 PM

Did you just get the mufflers or a whole exhaust. And also is there any hp/torque gain?

Orange5thGen · 11-19-2009, 09:24 PM

Man these sound great. I may have to try to experiment a little too.

Quote:

Originally Posted by mrray13

How do ya do that? lol...

Thanks BlackinBlackSS...I really love the in car sound!

kga10734 · 11-19-2009, 10:55 PM

I don't want to thread jack, but I think this could go here since it is Flowmaster related.

I saw this mentioned in another thread post #28

http://www.camaro5.com/forums/showth...v6#post1166838

So I started digging around and here is what I came up with.

Correct Flowmaster Axle Back item number but no description on the summit site. It does match the numbers given in the previous link above for the 2010 V6 Camaro.

http://www.summitracing.com/search/?...d=817483&dds=1

The axle back system they are going to put out uses the same mufflers as this axle back for the Mustang.

http://www.summitracing.com/parts/FLO-817460/

http://www.flowmastermufflers.com/kitpdf/817460.pdf

Which uses the 40 Series Delta Flow Muffler.

http://www.summitracing.com/parts/FLO-842543/

So I'm going to go out on a limb and say if I was to order the 40 Series Delta Flow mufflers, Flowmaster item #842543 and some new tips I would basically have the Axle back that Flowmaster is going to release soon?

tmac1granger33 · 11-19-2009, 11:14 PM

mrt sounds better imo sounds good though

mrray13 · 11-20-2009, 08:44 AM

Quote:

Originally Posted by kcamarom

Did you just get the mufflers or a whole exhaust. And also is there any hp/torque gain?

Mufflers and tips only. I don't know about any gains, going to see the dyno guy today, although I never did a baseline. So whatever I get will basicly be the baseline.

mrray13 · 11-20-2009, 08:46 AM

Quote:

Originally Posted by kga10734

I don't want to thread jack, but I think this could go here since it is Flowmaster related.

I saw this mentioned in another thread post #28

http://www.camaro5.com/forums/showth...v6#post1166838

So I started digging around and here is what I came up with.

Correct Flowmaster Axle Back item number but no description on the summit site. It does match the numbers given in the previous link above for the 2010 V6 Camaro.

http://www.summitracing.com/search/?...d=817483&dds=1

The axle back system they are going to put out uses the same mufflers as this axle back for the Mustang.

http://www.summitracing.com/parts/FLO-817460/

http://www.flowmastermufflers.com/kitpdf/817460.pdf

Which uses the 40 Series Delta Flow Muffler.

http://www.summitracing.com/parts/FLO-842543/

So I'm going to go out on a limb and say if I was to order the 40 Series Delta Flow mufflers, Flowmaster item #842543 and some new tips I would basically have the Axle back that Flowmaster is going to release soon?

Yep, basicly. Although I believe the 40 series will be louder then the Super 44s I'm running. Could be wrong though, lol...

mrray13 · 11-20-2009, 09:09 AM

There are a few pics of the system.

kga10734 · 11-20-2009, 01:58 PM

I'm not looking for any real gains in hp with any system. I think the GM engineers came up with a great exhaust system that allows these cars to flow. I just want to change the way it sounds, because the stock exhaust is to quiet while at idle and cruising speed and sounds weak under throttle. I don't care to spend a bunch of money for a better sound and only a few hp.

mrray13 · 11-20-2009, 06:05 PM

Never got to the dyno, :( , although I got mini me's Christmas/birthday (8 days apart) done! He'll be stoked!!

Diazr1 · 01-31-2012, 11:49 PM

Is this on a stock rs 1lt ?

11-19-2009, 06:20 PM	#29
scrming Red Brick of Vengeance! Drives: 12 Second Brick Join Date: Jun 2009 Location: at my pulpit Posts: 7,745	Sounds good! Sound is a bit on the thinner side... but still sounds good and the main thing is you are happy with it! __________________ 2011 Ford Flex EcoBoost Limited - 12.727 @ 109.790 MPH

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OK...I'm starting a better V6 exhaust examples thread!!	KMPrenger	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	612	09-06-2024 09:00 AM
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
RATING HEADERS???	SAUCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	20	12-02-2011 09:21 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 10:20 PM
Heard exhaust of L99 tonight - OMG!!!	Hylton	5th Gen Camaro SS LS LT General Discussions	60	03-06-2010 06:03 PM

11-19-2009, 09:13 PM	#32
kcamarom SoCal C5 Family Member Drives: 2010 CGM RS Join Date: Aug 2009 Location: San Diego Posts: 263	Did you just get the mufflers or a whole exhaust. And also is there any hp/torque gain?

11-19-2009, 10:55 PM	#34
kga10734 Don't Feed the Troll Drives: 2010 Camaro 2LT/RS & 1999 Corvette Join Date: Jun 2009 Location: Montgomery, TX Posts: 774	I don't want to thread jack, but I think this could go here since it is Flowmaster related. I saw this mentioned in another thread post #28 http://www.camaro5.com/forums/showth...v6#post1166838 So I started digging around and here is what I came up with. Correct Flowmaster Axle Back item number but no description on the summit site. It does match the numbers given in the previous link above for the 2010 V6 Camaro. http://www.summitracing.com/search/?...d=817483&dds=1 The axle back system they are going to put out uses the same mufflers as this axle back for the Mustang. http://www.summitracing.com/parts/FLO-817460/ http://www.flowmastermufflers.com/kitpdf/817460.pdf Which uses the 40 Series Delta Flow Muffler. http://www.summitracing.com/parts/FLO-842543/ So I'm going to go out on a limb and say if I was to order the 40 Series Delta Flow mufflers, Flowmaster item #842543 and some new tips I would basically have the Axle back that Flowmaster is going to release soon?

11-19-2009, 11:14 PM	#35
tmac1granger33 NM HT5 Drives: COTW 3/5/12 Join Date: Jul 2009 Location: los lunas, New Mexico Posts: 1,986 View My Garage	mrt sounds better imo sounds good though

11-20-2009, 09:09 AM	#38
mrray13 Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009 Location: southern Illinois Posts: 2,973	There are a few pics of the system.

11-20-2009, 01:58 PM	#39
kga10734 Don't Feed the Troll Drives: 2010 Camaro 2LT/RS & 1999 Corvette Join Date: Jun 2009 Location: Montgomery, TX Posts: 774	I'm not looking for any real gains in hp with any system. I think the GM engineers came up with a great exhaust system that allows these cars to flow. I just want to change the way it sounds, because the stock exhaust is to quiet while at idle and cruising speed and sounds weak under throttle. I don't care to spend a bunch of money for a better sound and only a few hp.

11-20-2009, 06:05 PM	#40
mrray13 Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009 Location: southern Illinois Posts: 2,973	Never got to the dyno, :( , although I got mini me's Christmas/birthday (8 days apart) done! He'll be stoked!!

01-31-2012, 11:49 PM	#41
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	Is this on a stock rs 1lt ?