ADM Performance makes 910RWHP and 1000RWTQ

[ADM PERFORMANCE]

Originally Posted by Louis @ LG Motorsports

I didnt take windy citys post as a bash to andy at all, just an onlookers point of view

Id like to see boost only and spray graphs!!

Windy City is a LPE BROTHER,I think!!!!BTW-ANY PIPES ON YET?




The only printed ones I sent to the customer are these,the rest are at the shop....He said the video was just amazing!

Lowest recorded numbers I have -

[Windy City]

Originally Posted by ADM PERFORMANCE

Windy City is a LPE BROTHER,I think!!!!BTW-ANY PIPES ON YET?

HOO RAH! To that!
No pipes on, I have some of the car torn up and probably a lot more to go! Have some Pfadt suspension parts on the way.
I want to see if Lingy is going to be at the Drag Race Expo here in January!
I'm gunna hold Grandpa Graham hostage and get him to fine tune (and add boost) to get me some more horses!
You guys in Texas get all the good weather! I'm looking at white stuff coming down now all around me!

[ADM PERFORMANCE]

Here is dyno 5 with the dyno set to standard.

Many shops have learned over the years that standard shows bigger numbers,we at ADM Performance have always shown our numbers at SAE.

Here is some more info for those that want it.....This car stock made 250 ftlb of torque at 3500 rpm.....it has now multiplied it x 4 at the same rpm.

[tones2SS]

Originally Posted by ADM PERFORMANCE

You asked for it -

Originally Posted by Abygale

Quit posting that! I look terrible. No makeup, my hair is flat because it was raining, and I look tired! I don't handle getting up at 4 am very well!

Thanks for posting Andy!! You guys do great work.
You look "terrible"?!?!!? Damn, I can only imagine how hot you look when not "terrible"!!

[Windy City]

Originally Posted by ADM PERFORMANCE

Here is dyno 5 with the dyno set to standard.

Many shops have learned over the years that standard shows bigger numbers,we at ADM Performance have always shown our numbers at SAE.

Here is some more info for those that want it.....This car stock made 250 ftlb of torque at 3500 rpm.....it has now multiplied it x 4 at the same rpm.

The torque at the lower RPM is unreal. Best to keep this car from hooking as it will certainly test the drive train!

[mikel441]

I love the sound of a supercharger in the morning. It sounds like,......... Victory!

[tones2SS]

Originally Posted by ADM PERFORMANCE

We run 114 octane and a .050 jetted(100-125hp) spraybar nos shot in the airbox....to achieve these numbers.

Pump gas is 750 rwhp and 800 rwtq at 16 psi boost with no Nitrous assist.

On pump gas the car is the perfect street car in my opinion,On race gas(tuned appropriatly) with the Nitrous assist it has yet to be driven on the street or track.


Meth is not needed with this setup and design.


Andy


BTW- PEAK TORQUE IS AT 3500 - 4000 RPM,SO DRIVING AT WIDE OPEN THROTTLE AT THAT RPM IS AN ART IN ITSELF!SOME RECENT PROCHARGED GRAPHS HAVE SHOWN UP AND PRODUCE HALF THE NUMBERS WE MAKE AT 3500 RPM.

Originally Posted by ADM PERFORMANCE

'

Definition of a good driving car by ADM PERFORMANCE

1. Must start and idle like stock ls3 from the factory in any temp.
2. Must not spit and sputter when trying to take off from a light.
3.No bucking or surging while maintaining speed.
4.No clutch chatter when taking off from a stop.

Each customer has affordable goals,each customer has certain tolerations...you must be able to read this in a customer so that you can build what he or she wants.

There is an old saying I live by - "IS IT GOOD ENOUGH,THE CUSTOMER WILL DECIDE"

Andy

VERY NICE!! I thank you for the numbers without nitrous, as that would be the route I would go.
And your definitions of a good driving car by ADM Performance are great!

[Revo1]

[nl12]

What CR pistons

[ADM PERFORMANCE]

Originally Posted by nl12

What CR pistons

I am sorry but pistons dont actually come with different compression ratios.

If you want to know what compression is than I will say it is less han stock
Ls-3.


Andy

[mws444]

Originally Posted by ADM PERFORMANCE

Windy City is a LPE BROTHER,I think!!!!BTW-ANY PIPES ON YET?




The only printed ones I sent to the customer are these,the rest are at the shop....He said the video was just amazing!

Lowest recorded numbers I have -

I Like!!!!!!!!
That last one was without go gas, what octane?

[RS-SS2]

Very very nice Andy.

[2LTRS]

[the rich dude]

Originally Posted by ADM PERFORMANCE

I am sorry but pistons dont actually come with different compression ratios.

Andy

I would like to know exactly what you mean by this???

Pistons certainly do come in different compression ratio's. Flat top pistons, dome pistons, dish pistons and of course different height pistons.

By the way, nice job on this camaro!!!