Custom Roto-Fab Covers - Installed. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Number_9 · 01-16-2010, 11:37 AM

Got my Roto-Fab coil/fuel rail covers in last week, and installed them lickity split. Piece of cake on the install and the final effect is awesome! THey look a little dark in the pic, but the paint matches my IMB and even has a little flake to match. The lettering is in Arctic White, to match the Rally Stripes on the car.

Combined with the ADM Performance Race Cold Air Intake and the Carbon Fiber fuse block cover, I really could not be happier with the overall look... way to go Roto-Fab (and thanks again, Mike!)

CAM MAN · 01-16-2010, 11:44 AM

Sweet!!!!!!!!!!!!!

RoyalKev · 01-16-2010, 11:49 AM

Ordered mine to red with black lettering, also got a intake from them

GMRULZ · 01-16-2010, 12:18 PM

Frakin awesome man!!!! I highly recomend you paint the ADM IBM and you would have the ultimate shiznit.. Lol... So where did you get the carbon fuse box cover?

Number_9 · 01-16-2010, 12:24 PM

Quote:

Originally Posted by GMRULZ

Frakin awesome man!!!! I highly recomend you paint the ADM IBM and you would have the ultimate shiznit.. Lol... So where did you get the carbon fuse box cover?

You're reading my mind. Thinking I'll paint the lid and the metal in the intake. Got the fuse cover from ADM... link in the original post.

towmoe · 01-16-2010, 12:40 PM

Where did you order and how much did it cost? Thanks!

Number_9 · 01-16-2010, 12:43 PM

Quote:

Originally Posted by towmoe

Where did you order and how much did it cost? Thanks!

Follow the Roto-Fab link in the original post. Cost depends on the options you select, so about $450-$500. Mine were about $500.

towmoe · 01-16-2010, 12:47 PM

Thanks, I didn't notice the link earlier.

fcu678 · 01-16-2010, 12:58 PM

Looks Great!!!

I really like the customized Bow Tie on the hood insulation where did you get it?

Thanks
Craig

Number_9 · 01-16-2010, 01:45 PM

Quote:

Originally Posted by fcu678

Looks Great!!!

I really like the customized Bow Tie on the hood insulation where did you get it?

Thanks! I got the badge from the Hoodplates.com website.

Sack Rat 2SS · 01-17-2010, 11:20 AM

I absolutely think this is the way the factory should have done the engine bay rather than the single engine cover. Much like the Vettes. I am considering these covers as well. A great look.

GMRULZ · 01-17-2010, 06:18 PM

Quote:

Originally Posted by Number_9

You're reading my mind. Thinking I'll paint the lid and the metal in the intake. Got the fuse cover from ADM... link in the original post.

Thanks Bro!

ssmike · 01-17-2010, 08:24 PM

Yea, I agree this is how GM should have done their covers! The Roto-Fab covers look more like the Corvette covers instead of the ugly plastic abortions that GM put on them! number_9, I love the blue on yours, looks awsome!

Rockin the BlueSS · 01-18-2010, 03:24 PM

Quote:

Originally Posted by Number_9

what is that silver thermos thing just in front of your battery terminal? is that where you relocated your windshield washer reservoir? (if it is you got any more pictures of how you did it?) or is it some kind of a catch can? or do you just like to keep your coffee warm on your way to work?

awesome engine compartment! i just bought the ADM race intake also cant wait to get it and install it.

01-16-2010, 11:37 AM	#1
Number_9 Drives: 2010 2SS/RS L99 Join Date: Mar 2009 Location: Trophy Club, TX Posts: 1,464 View My Garage	Custom Roto-Fab Covers - Installed. Got my Roto-Fab coil/fuel rail covers in last week, and installed them lickity split. Piece of cake on the install and the final effect is awesome! THey look a little dark in the pic, but the paint matches my IMB and even has a little flake to match. The lettering is in Arctic White, to match the Rally Stripes on the car. Combined with the ADM Performance Race Cold Air Intake and the Carbon Fiber fuse block cover, I really could not be happier with the overall look... way to go Roto-Fab (and thanks again, Mike!) __________________

01-16-2010, 12:18 PM	#4
GMRULZ Drives: 2010 SS & 2008 C6 Join Date: Mar 2008 Location: VA Posts: 1,819	Frakin awesome man!!!! I highly recomend you paint the ADM IBM and you would have the ultimate shiznit.. Lol... So where did you get the carbon fuse box cover? __________________ 2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter. Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..

01-16-2010, 12:40 PM	#6
towmoe Drives: IBM 2010 Camaro Join Date: Dec 2008 Location: OKC Posts: 462	Where did you order and how much did it cost? Thanks! __________________ 2SS/M6 \| Imperial Blue Metallic \| White Stripes \| Black Int

01-16-2010, 12:47 PM	#8
towmoe Drives: IBM 2010 Camaro Join Date: Dec 2008 Location: OKC Posts: 462	Thanks, I didn't notice the link earlier. __________________ 2SS/M6 \| Imperial Blue Metallic \| White Stripes \| Black Int

01-17-2010, 11:20 AM	#11
Sack Rat 2SS Drives: Silver SS/RS, Man 6 Join Date: Apr 2009 Location: DFW area, Texas Posts: 884	I absolutely think this is the way the factory should have done the engine bay rather than the single engine cover. Much like the Vettes. I am considering these covers as well. A great look. __________________ Silver 2SS/RS Man/6 CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears

01-16-2010, 11:44 AM	#2
CAM MAN Drives: ALL 5 GEN CAMAROS Join Date: May 2009 Location: SanAntonio Texas Posts: 750 View My Garage	Sweet!!!!!!!!!!!!!

01-16-2010, 11:49 AM	#3
RoyalKev Drives: 2010 Camaro SS Join Date: Jan 2009 Location: Maryland Posts: 973	Ordered mine to red with black lettering, also got a intake from them

01-16-2010, 12:58 PM	#9
fcu678 5Th Gen (Craig) Drives: 2014 C7 Join Date: Oct 2008 Location: Houma, Louisiana Posts: 765 View My Garage	Looks Great!!! I really like the customized Bow Tie on the hood insulation where did you get it? Thanks Craig

01-17-2010, 08:24 PM	#13
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,841	Yea, I agree this is how GM should have done their covers! The Roto-Fab covers look more like the Corvette covers instead of the ugly plastic abortions that GM put on them! number_9, I love the blue on yours, looks awsome! Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom Magnaflow Exhaust	buddylok	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	49	05-16-2016 12:02 PM
Custom dash plaque installed	dragonZ28	Interior Parts & Accessories	397	04-09-2013 12:06 PM
Custom Painted Stripes Underway for Bumleb's Rally Yellow 2SS	RumbleBeeSS	Cosmetics and Lighting Modification Discussions	140	06-20-2010 01:12 AM
The Official Thread about Custom Paint!	pinkcamaro10	Cosmetics and Lighting Modification Discussions	30	03-28-2009 08:17 PM