Performance Clutch? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

11flat · 01-26-2010, 04:29 PM

What brand of clutch do you guys recomend when using a Maggie TVS2300, Headers, and CAI.

Also would you recomend single or twin disk. and why

jrpxxii · 01-26-2010, 04:53 PM

Fidanza 7.6 is what I have and is one of the best clutches out there. It is a twin disc and retains stock feel with no chatter. The only other option I would consider is the ZR-1 clutch. My engine mods are way more extreme and the Fidanza will hold everything you throw at it and feel like stock without noise.

600hp-lpe · 01-26-2010, 05:52 PM

Lingenfelter has a 2 disc ZR-1 setup complete with a lightened steel flywheel...

Speed74SS · 01-26-2010, 09:44 PM

Quote:

Originally Posted by 570hp-lpe

Lingenfelter has a 2 disc ZR-1 setup complete with a lightened steel flywheel...

Just ordered mine today and will be dropping the car off to LPE in March to get it installed before the Camaro5 Fest.

JM10 · 01-26-2010, 10:04 PM

My car is my daily driver so I ordered the fidanza 6.5
I shooting for 600rwhp with a twin screw SC an headers (ARH)

JM

MTI Racing · 01-28-2010, 12:08 PM

Check out our clutch.

http://www.mtiracing.com/purchase/20...10-camaro.html

11flat · 01-28-2010, 05:41 PM

THANKS FOR ALL THE INFO. What do you guys recomend for a flywheel, aluminum vs steel. The car is mainly street but may see the strip 10 times a year for as many passes as I can make.

EDISKRAD EHT · 01-28-2010, 06:07 PM

If Monster Clutches makes one for the Camaro, I'll be going with them when the time comes.

I love the one in my GTO and the customer service was the best I've ever had.

Frans96ss · 01-28-2010, 06:22 PM

RPS ALL DAY!!!! Best Clutch for ANY LSX application. Give me a call or PM if you are interested.

Moriartii · 01-28-2010, 06:48 PM

Quote:

Originally Posted by 11flat

THANKS FOR ALL THE INFO. What do you guys recomend for a flywheel, aluminum vs steel. The car is mainly street but may see the strip 10 times a year for as many passes as I can make.

I have no experiences with flywheels. That being said I would recommend a steel one. I base this statement on having seen what an aluminum rear sprocket looks like after it had come off my 1100cbr (crotch rocket). The teeth on the sprocket were shark finned and worn down to unsafe levels. A fly wheel happens to remind me of a sprocket and said fly wheel is part of a transfer chain of decent power. See my corolary?

Others may chime in and educate us both but my thought is use a steel fly wheel.

Cheers
K

cpssr · 01-28-2010, 07:24 PM

Quote:

Originally Posted by EDISKRAD EHT

If Monster Clutches makes one for the Camaro, I'll be going with them when the time comes.

I love the one in my GTO and the customer service was the best I've ever had.

I am taking my car next friday to Moster Clutches for them to use so I think they will have one out soon.

Nickyg · 01-31-2010, 07:58 AM

You cAn check out spec I have a twin it drives like stock
it's a really soft clutch I have big hp it's never slipped

Jason 98 TA · 01-31-2010, 05:50 PM

I'm putting a Monster in my car when we put it together. They come with a warranty & the pricing is pretty nice. You can checkout our site or give us a call for more info.

We also stock the ZR1 setup with flywheel in case you guys need that setup!

NicKey · 01-31-2010, 06:14 PM

We use Ram Clutches. They have various options for intended applications and power levels and have both Single and Dual disks designed especially for the 5th Gen Camaro.

http://www.ramclutches.com/

01-26-2010, 04:29 PM	#1
11flat Drives: 2010 camaro ss/rs m6 Join Date: Oct 2009 Location: moreno valley, ca Posts: 117	Performance Clutch? What brand of clutch do you guys recomend when using a Maggie TVS2300, Headers, and CAI. Also would you recomend single or twin disk. and why

01-31-2010, 07:58 AM	#12
Nickyg Drives: 2010 turbo camaro Join Date: Dec 2009 Location: New jersey Posts: 29	You cAn check out spec I have a twin it drives like stock it's a really soft clutch I have big hp it's never slipped __________________ 2010 Turbo Camaro

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
Clutch fluid contamination problems on Vette fixed for Camaro???	LDGn63	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	11	05-28-2012 10:17 PM
Question for seasoned stick shift drivers	tommygun6644	Dragstrip and Launch Techniques Discussion	69	10-11-2010 11:42 PM
2010 X5 Camaro by X-Body Cars :: Powered by PHASTEK Performance	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	0	11-10-2009 10:18 AM
Best way to learn how to drive a stick?	Beitzel15	Off-topic Discussions	21	06-24-2009 12:31 PM

01-26-2010, 04:53 PM	#2
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	Fidanza 7.6 is what I have and is one of the best clutches out there. It is a twin disc and retains stock feel with no chatter. The only other option I would consider is the ZR-1 clutch. My engine mods are way more extreme and the Fidanza will hold everything you throw at it and feel like stock without noise.

01-26-2010, 05:52 PM	#3
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Lingenfelter has a 2 disc ZR-1 setup complete with a lightened steel flywheel...

01-26-2010, 10:04 PM	#5
JM10 Se habla español Drives: 2010 Camaro SS/RS VR Join Date: Jun 2009 Location: Arizona/Sonora Posts: 605	My car is my daily driver so I ordered the fidanza 6.5 I shooting for 600rwhp with a twin screw SC an headers (ARH) JM

01-28-2010, 12:08 PM	#6
MTI Racing Drives: 2010 Camaro SS Join Date: May 2009 Location: Marietta, GA Posts: 442	Check out our clutch. http://www.mtiracing.com/purchase/20...10-camaro.html

01-28-2010, 05:41 PM	#7
11flat Drives: 2010 camaro ss/rs m6 Join Date: Oct 2009 Location: moreno valley, ca Posts: 117	THANKS FOR ALL THE INFO. What do you guys recomend for a flywheel, aluminum vs steel. The car is mainly street but may see the strip 10 times a year for as many passes as I can make.

01-28-2010, 06:07 PM	#8
EDISKRAD EHT Drives: Blown Goat Join Date: Jan 2010 Location: Edmonton, AB, Canada Posts: 76	If Monster Clutches makes one for the Camaro, I'll be going with them when the time comes. I love the one in my GTO and the customer service was the best I've ever had.

01-28-2010, 06:22 PM	#9
Frans96ss Drives: 96SS Join Date: May 2009 Location: New Castle Delaware Posts: 1,946	RPS ALL DAY!!!! Best Clutch for ANY LSX application. Give me a call or PM if you are interested.

01-31-2010, 05:50 PM	#13
Jason 98 TA Drives: Camaro Join Date: Apr 2009 Location: Texas Posts: 1,670	I'm putting a Monster in my car when we put it together. They come with a warranty & the pricing is pretty nice. You can checkout our site or give us a call for more info. We also stock the ZR1 setup with flywheel in case you guys need that setup!

01-31-2010, 06:14 PM	#14
NicKey Drives: Nickey Super Camaro Join Date: Nov 2008 Location: Loves Park, Illinois Posts: 1,686	We use Ram Clutches. They have various options for intended applications and power levels and have both Single and Dual disks designed especially for the 5th Gen Camaro. http://www.ramclutches.com/