![]() |
|
|
#1 |
![]() Drives: 2010 Camaro 1LT Join Date: Jan 2010
Location: CA
Posts: 18
|
Engine Temperature Gauge
I've only had my Camaro about 1 month and bought it certified used. Everything is good on the car except I noticed that the engine temp gauge doesn't go to the middle temp but stays in between cold and middle. Is this a normal occurrance?
Keep in mind I used to drive a truck and once the engine was warm and running, the gauge would go to the middle. |
|
|
|
|
|
#2 |
|
BOD 5/28/09 #13485
Drives: 2010 Camaro 2LT RS Join Date: Jan 2009
Location: Chesapeake, Virginia
Posts: 913
|
NORMAL. If you want to check you can bring up the engine temp on the DIC ( this is the display that is between the speedo and tach) scroll through the display useing the controls on the turn signal stick.
__________________
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() |
normal, I also think that a lower temp is better which is why people are changing to 160 degree thermostats.
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| LS3 engine specifications | Tran | Wiki | 3 | 10-06-2010 11:56 PM |
| LLT engine specifications | Tran | Wiki | 2 | 03-29-2010 11:06 AM |
| Tuning for dummies | Milk 1027 | Tuning / Diagnostics -- engine and transmission | 43 | 03-17-2010 09:06 AM |
| P0300 Misfire Code Help | black-knight | 4th Generation Camaros | 4 | 02-08-2010 02:45 PM |
| Engine break in methods | two_wheel_mayhem | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 39 | 08-19-2009 10:22 AM |