camaro emblems

[olblue75]

anyone out there got a set of black fender emblems the "CAMARO" letters

[Dangeruss]

Originally Posted by olblue75

anyone out there got a set of black fender emblems the "CAMARO" letters

Are you asking if anyone on the forum has them or where you can get them?

If you're wanting to buy them...here you go.

http://www.emblempros.com/inc/sdetail/3718

[spectrepig]

I bought the black letters to put on my black 2SS. When they arrived, I wasn't impressed with how they looked. They look cheap so I left them off. I bought a set of SS badges and put them in place of the "camaro" on the fender.

[johndawg]

Originally Posted by spectrepig

I bought the black letters to put on my black 2SS. When they arrived, I wasn't impressed with how they looked. They look cheap so I left them off. I bought a set of SS badges and put them in place of the "camaro" on the fender.

Thanks for posting... I was thinking about ordering those.

[jaythree]

I also bought a set of the black ones like spectrepig and I also was not impressed. They were very cheap looking and not even the same size as the stock ones. (they were smaller) I'm in the process of painting a pair of the OEM letters. I bought them from gmpartsdirect.com for about 6 bucks. I lightly sanded them with 220 grit paper to rough them up. I then applied a spray primer (3 coats) then followed that with 4 coats of flat black spray paint. I then put a couple coats of matte clear on them. They are drying now, I will post pics when they are installed.

[Dangeruss]

Originally Posted by jaythree

I also bought a set of the black ones like spectrepig and I also was not impressed. They were very cheap looking and not even the same size as the stock ones. (they were smaller) I'm in the process of painting a pair of the OEM letters. I bought them from gmpartsdirect.com for about 6 bucks. I lightly sanded them with 220 grit paper to rough them up. I then applied a spray primer (3 coats) then followed that with 4 coats of flat black spray paint. I then put a couple coats of matte clear on them. They are drying now, I will post pics when they are installed.

That's good to know. I actually didn't buy it there, but saw it recently on their site when I purchased some other products. I already had a replacement on order and am having it custom painted along with all my other badges and bowties.

[johndawg]

Originally Posted by jaythree

I also bought a set of the black ones like spectrepig and I also was not impressed. They were very cheap looking and not even the same size as the stock ones. (they were smaller) I'm in the process of painting a pair of the OEM letters. I bought them from gmpartsdirect.com for about 6 bucks. I lightly sanded them with 220 grit paper to rough them up. I then applied a spray primer (3 coats) then followed that with 4 coats of flat black spray paint. I then put a couple coats of matte clear on them. They are drying now, I will post pics when they are installed.

I look forward to seeing the end results!

[jaythree]

Here are the results...I really like the way they came out!

[johndawg]

cool... What kind of tape did you use to put them back on?

[jaythree]

Originally Posted by johndawg

cool... What kind of tape did you use to put them back on?

I bougnt brand new emblems from Chevy. I don't recommend reusing the old ones. They are only about 6 bucks each...

[2010 SSRS]

cool

[butterfingers]

Heres what I did ...