where to purchase replacement dashboard for 2010 camaro??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroCorvetteFerrari · 03-15-2010, 02:55 PM

Make a long story short, as there is another post on a different topic related to this one, but I am looking for where they sell replacement dashboards for 2010 camaro. I don't know how it is assembled, if it is one big piece or there are multiple pieces. The stupid dealer drilled a hole for a LED valet switch near the steering column and I want to remove the led valet switch and either fix the hoel to make it look and feel like the dashboard before it was violated, or consider replacing the dashboard. The problem is I don't know where to look, how much it costs, and what to look for. Any help would be appreciated.

Thank you

Jeff

P.S. I called up two restoration places in my area. One said they could fix it for 75 and the other said I'd need a whole new dash or just the piece, because it is plastic and you'll never get it back to looking and feeling stock. Both indicated they'd have to see the car to get a better understanding. I don't trust the guy that says replace the whole dash, but maybe he is right. Any suggestions?

Camaro21 · 03-15-2010, 03:25 PM

I just saw one listed on eBay this morning..

CamaroCorvetteFerrari · 03-15-2010, 03:52 PM

Thank you very much. I just looked. Does anyone know if you can replace part of the dash or is it all one piece?

skuttduck · 03-15-2010, 04:08 PM

Does this help?

There are 4 different parts. W premium audio, and W/O premium audio

1st design, and 2nd design

Run about $600 or so from GM parts direct

92240644 = Without premium first design
92240645 = With Premium Audio second design.

CamaroCorvetteFerrari · 03-15-2010, 04:39 PM

Yes, it does help. Thank you. Does not appear the piece next to the steering column is replaceable. It appears it is one big piece. I'll probably leave the stupid led switch in there and certainly not going to the dealer again. Thanks again.

ron10 · 03-15-2010, 04:49 PM

couldn't you just plug it with a flat black plug? or is in in a place you could put on a dash plaque?

Tecca · 03-15-2010, 04:58 PM

Hell with that, make the dealer replace it.

Do you have any pics, maybe you can use it for another switch or a name plate or something.

Waco · 03-15-2010, 04:58 PM

Dash plaque...$44 I think?

CamaroCorvetteFerrari · 03-15-2010, 05:01 PM

I could probably put on a dash plaque, as you suggested. It's to the left of the steering column, right of the driver-side air vent, and a few inches north and east of the headlight dial switch. I wanted to leave it stock, so I may have to find a way to cover it. Or, I'm hoping a restoration place can plug the hole and smooth it out so it blends in with the rest of the plastic, if something like that exists.

It feels like someone scratched my car but on the inside, not the outside, and it was the dealer and I haven't had the car for even a week now. I'm sure other Camaro/Corvette owners can understand...heck, even mustang and challenger owners, why not.

CamaroCorvetteFerrari · 03-15-2010, 05:17 PM

Yea, I'm gonna call the dealer and raise hell, let them know I am unsatisfied with this job and what will they do about this.

I talked to the sales person who sold me the vehicle and he's gonna call me back tomorrow to see what to do about it. I already spoke to a automotive restoration place in happague, ny that has 2010 camaros in he gave me a list of options that they could do, if the dealer doesn't do anything. I made the mistake of getting an alarm and from the dealer, but he agreed it was beyond stupid to drill it into the dash.

CamaroCorvetteFerrari · 03-15-2010, 07:20 PM

Okay, hopefully I uploaded it correctly.

n!ght r!der · 03-15-2010, 07:24 PM

Tecca · 03-15-2010, 07:32 PM

Oh hell no what idiot would put that there, whoever installed that should be shot. I would make the dealership replace it that is just stupid.

CamaroCorvetteFerrari · 03-15-2010, 07:53 PM

Oh, I intend to. The reason the installer prolly did that is the lightwitch dial pops off, making it real simple to put the stuipd LED switch there. The idiot just wanted to do a fast job.

03-15-2010, 02:55 PM	#1
CamaroCorvetteFerrari Drives: 2010 Chevrolet Camaro 1LT RS Join Date: Mar 2010 Location: New York Posts: 43	where to purchase replacement dashboard for 2010 camaro??? Make a long story short, as there is another post on a different topic related to this one, but I am looking for where they sell replacement dashboards for 2010 camaro. I don't know how it is assembled, if it is one big piece or there are multiple pieces. The stupid dealer drilled a hole for a LED valet switch near the steering column and I want to remove the led valet switch and either fix the hoel to make it look and feel like the dashboard before it was violated, or consider replacing the dashboard. The problem is I don't know where to look, how much it costs, and what to look for. Any help would be appreciated. Thank you Jeff P.S. I called up two restoration places in my area. One said they could fix it for 75 and the other said I'd need a whole new dash or just the piece, because it is plastic and you'll never get it back to looking and feeling stock. Both indicated they'd have to see the car to get a better understanding. I don't trust the guy that says replace the whole dash, but maybe he is right. Any suggestions?

03-15-2010, 05:17 PM	#10
CamaroCorvetteFerrari Drives: 2010 Chevrolet Camaro 1LT RS Join Date: Mar 2010 Location: New York Posts: 43	Yea, I'm gonna call the dealer and raise hell, let them know I am unsatisfied with this job and what will they do about this. I talked to the sales person who sold me the vehicle and he's gonna call me back tomorrow to see what to do about it. I already spoke to a automotive restoration place in happague, ny that has 2010 camaros in he gave me a list of options that they could do, if the dealer doesn't do anything. I made the mistake of getting an alarm and from the dealer, but he agreed it was beyond stupid to drill it into the dash. Last edited by CamaroCorvetteFerrari; 03-15-2010 at 05:47 PM.

03-15-2010, 07:20 PM	#11
CamaroCorvetteFerrari Drives: 2010 Chevrolet Camaro 1LT RS Join Date: Mar 2010 Location: New York Posts: 43	Okay, hopefully I uploaded it correctly. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Camaro Laws	ChevyNut	Off-topic Discussions	107	11-09-2016 06:40 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 08:05 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM

03-15-2010, 03:25 PM	#2
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040 View My Garage	I just saw one listed on eBay this morning..

03-15-2010, 03:52 PM	#3
CamaroCorvetteFerrari Drives: 2010 Chevrolet Camaro 1LT RS Join Date: Mar 2010 Location: New York Posts: 43	Thank you very much. I just looked. Does anyone know if you can replace part of the dash or is it all one piece?

03-15-2010, 04:08 PM	#4
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,529	Does this help? There are 4 different parts. W premium audio, and W/O premium audio 1st design, and 2nd design Run about $600 or so from GM parts direct 92240644 = Without premium first design 92240645 = With Premium Audio second design.

03-15-2010, 04:39 PM	#5
CamaroCorvetteFerrari Drives: 2010 Chevrolet Camaro 1LT RS Join Date: Mar 2010 Location: New York Posts: 43	Yes, it does help. Thank you. Does not appear the piece next to the steering column is replaceable. It appears it is one big piece. I'll probably leave the stupid led switch in there and certainly not going to the dealer again. Thanks again.

03-15-2010, 04:49 PM	#6
ron10 Drives: 2010 2SS IOM L99 Join Date: Jan 2010 Location: LOUISVILLE,KY.. Posts: 7,545	couldn't you just plug it with a flat black plug? or is in in a place you could put on a dash plaque?

03-15-2010, 04:58 PM	#7
Tecca . Drives: ... Join Date: Apr 2009 Location: Colorado Posts: 1,377	Hell with that, make the dealer replace it. Do you have any pics, maybe you can use it for another switch or a name plate or something.

03-15-2010, 04:58 PM	#8
Waco Layla Drives: '10 2SS/RS, LS3, CGM/IO Join Date: Dec 2009 Location: Newport, RI Posts: 345	Dash plaque...$44 I think?

03-15-2010, 05:01 PM	#9
CamaroCorvetteFerrari Drives: 2010 Chevrolet Camaro 1LT RS Join Date: Mar 2010 Location: New York Posts: 43	I could probably put on a dash plaque, as you suggested. It's to the left of the steering column, right of the driver-side air vent, and a few inches north and east of the headlight dial switch. I wanted to leave it stock, so I may have to find a way to cover it. Or, I'm hoping a restoration place can plug the hole and smooth it out so it blends in with the rest of the plastic, if something like that exists. It feels like someone scratched my car but on the inside, not the outside, and it was the dealer and I haven't had the car for even a week now. I'm sure other Camaro/Corvette owners can understand...heck, even mustang and challenger owners, why not.

03-15-2010, 07:24 PM	#12
n!ght r!der That Guy Drives: really good Join Date: May 2009 Location: Maryland Posts: 858

03-15-2010, 07:32 PM	#13
Tecca . Drives: ... Join Date: Apr 2009 Location: Colorado Posts: 1,377	Oh hell no what idiot would put that there, whoever installed that should be shot. I would make the dealership replace it that is just stupid.

03-15-2010, 07:53 PM	#14
CamaroCorvetteFerrari Drives: 2010 Chevrolet Camaro 1LT RS Join Date: Mar 2010 Location: New York Posts: 43	Oh, I intend to. The reason the installer prolly did that is the lightwitch dial pops off, making it real simple to put the stuipd LED switch there. The idiot just wanted to do a fast job.