![]() |
|
|
#15 |
|
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,572
|
I use both, and really enjoy the outcome of both.
|
|
|
|
|
|
#16 |
|
12.23s@113mph
Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009
Location: Houston, TX
Posts: 1,197
|
![]() i can't decide between the 2! i'm new to the car detailing topic, i'm only 23 and the camaro is the 1st car of mine that needs proper care to the paint. my only other car is an old beat up truck with peeling paint that i only use to get to work on rainy days and hauling my jet ski. i've NEVER used a machine buffer, mainly because i'm hesitant to use it around the vinyl stripes. if you Adams or Zaino guys have any insight to work around those with a buffer, please ![]() that being said I will wait to get the PC until i am skilled enough at applying this stuff by hand. those Adam's hex grip pads look awesome! will they work well with another product brand? awhile back i bought a bunch of Meguiar's product since it was easy to purchase in the store, but once my current bottles are out (1 or 2 more details) i want to switch to either Zaino or Adams. the Zaino system seems kinda confusing to me... they don't use a wax, and you have to put multiple coats of each product. the Adams products, well, look like the typical system of clay, swirl remover, polish, then wax; which i am used to already. i have minor swirls on the rear of the car, bought Meguiar's SwirlX and applied it by hand; didn't work. i have not clayed the car yet... do you guys think by claying it, removing the swirls with my current product by hand will be more effective?
__________________
RIP Cammie 7/15/2009 - 4/1/2011 |
|
|
|
|
|
#17 | |
|
.
Drives: ... Join Date: Apr 2009
Location: Colorado
Posts: 1,377
|
Quote:
Also for the stripes if you are hesitant you can always mask them with painters tape or the green 3m tape. Nothing like getting the look of your neighbors when you tape your car off. |
|
|
|
|
|
|
#18 | |
|
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,572
|
Quote:
. You do want to put a couple coats of Z-2 on it, after you clay it. Then if you want to go a little farther, go with some Clean Polisher or Gloss Enhancer. Adams has the same stuff, different names. If you want to keep going farther into it...you can apply some Finale Spray. But the most important thing you want to do is clay it and polish it. All nicely done by hand and you will feel great. Going beyond that with additional product isn't a must, but the results are just more enhancing and can been seen when you stand back from the car. If this is your first car.. sure, get the products, be proud of your ride and spend some time babying it. You will enjoy the looks and compliments from your hard work. |
|
|
|
|
|
|
#19 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009
Location: Ft. Mitchell, Alabama
Posts: 7,198
|
Sounds like you have a perfect practice vehicle you drive every day. If you can make that truck "pop", you'll have more confidence with the Camaro. My .02
__________________
Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)
|
|
|
|
|
|
#20 | ||
|
Moderator
Drives: '99 Camaro SS #1392 Join Date: Jun 2006
Location: Newtown, Pa.
Posts: 3,982
|
Quote:
Quote:
It honestly is very easy to use. Ed |
||
|
|
|
|
|
#21 |
|
SoCal C5 Family Member
Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009
Location: San Diego, CA, USA
Posts: 5,298
|
They are both very good products, IMO. Both fairly easy to use. I have never used either before the Camaro. I bought ALL the Zaino products and really like the result. After reading about the Zaino scratch/swirl product, I found that it was a filler and would get most swirls out, over time. Not that it's bad, but Adams doesn't fill. It's Swirl & haze remover, again, IMO, do a much better job. Now, I'm using them both...just got Adam's black wax and will try that next. I've been using my Porter Cable on all the Adam's stuff. Even tried it with Zaino - I like that too!
![]() I don't think you can go wrong with either!
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~
2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers; |
|
|
|
|
|
#22 |
|
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
I like Turtle Wax and Armor-All.
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
|
|
|
|
|
#23 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009
Location: Ft. Mitchell, Alabama
Posts: 7,198
|
__________________
Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)
|
|
|
|
|
|
#24 |
|
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
|
|
|
|
|
#25 |
|
12.23s@113mph
Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009
Location: Houston, TX
Posts: 1,197
|
placed my first order of Adam's products.
sorry zaino guys, the Junkman and Adam's videos had me sold. with a 110% guarantee, my money is secured
__________________
RIP Cammie 7/15/2009 - 4/1/2011 |
|
|
|
|
|
#26 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009
Location: Ft. Mitchell, Alabama
Posts: 7,198
|
Just wait until you call to ask a question and Adam Pitale answers. (owner) Loves to talk about cars!
__________________
Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)
|
|
|
|
|
|
#27 | |
|
12.23s@113mph
Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009
Location: Houston, TX
Posts: 1,197
|
Quote:
__________________
RIP Cammie 7/15/2009 - 4/1/2011 |
|
|
|
|
|
|
#28 | |
|
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
Quote:
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Washing/Detailing for Newbies | MRK III Z28 | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 124 | 02-05-2024 10:55 PM |
| ADAM'S CAR CARE CLINIC - 3/20/10 | Charlie@STILLEN | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 17 | 03-19-2010 10:33 AM |
| Wolfgang Fuzion and Zaino | floraneg | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 1 | 12-24-2009 10:29 PM |
| How are Zaino products packaged for delivery? | GothamCamaro | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 15 | 07-19-2009 07:24 PM |
| Zaino is great but there are other brands | Thrillz | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 3 | 06-02-2009 10:17 AM |