Saskatoon/Saskatchewan guys

[Xstunter]

Originally Posted by zerox

Im gonna have to get this for my bumblebee, this is so cool lol

http://www.camaro5.com/forums/showth...t=67145&page=2

Watch the video

hahahaha! i love it! If i had a bumblebee transformer edition, i'd have to get that!

[TheCaptain]

lol, when i was at Ziebart getting my SRX done, we ended up talking about your car xstunter! He just said it was awesome and you were in a few days earlier then when i had showed up.
I was like, hey, i "know" that guy!

Ziebart did an amazing job on my SRX. I bought a 3M front end protection package from ebay, got the A pillers done, the front windows tinted, Diamond Gloss, and undercoat all for $1000. The SRX's rear fenders don't poke out enough, and the bottom is all plastic already anyway.
I shall get some pics up when it is cleaned, it can't be wet for 5 days after Diamond Glossing.

[Xstunter]

Originally Posted by TheCaptain

lol, when i was at Ziebart getting my SRX done, we ended up talking about your car xstunter! He just said it was awesome and you were in a few days earlier then when i had showed up.
I was like, hey, i "know" that guy!

Ziebart did an amazing job on my SRX. I bought a 3M front end protection package from ebay, got the A pillers done, the front windows tinted, Diamond Gloss, and undercoat all for $1000. The SRX's rear fenders don't poke out enough, and the bottom is all plastic already anyway.
I shall get some pics up when it is cleaned, it can't be wet for 5 days after Diamond Glossing.

Hahahah! that is awsome. I am getting the 3M done at this moment, should be done by the end of the day.

can't wait to see the pics of ur WRX, i like those cars.

btw - Mass Effect 2 kicks ass, beat that game about 2 weeks ago, as a vanguard on hard.

[djsnoflake]

Originally Posted by Xstunter

Hahahah! that is awsome. I am getting the 3M done at this moment, should be done by the end of the day.

can't wait to see the pics of ur WRX, i like those cars.

btw - Mass Effect 2 kicks ass, beat that game about 2 weeks ago, as a vanguard on hard.

Sweet! What is your gamertag? I will add you!

Mine is Hydra HH

[Xstunter]

Originally Posted by djsnoflake

Sweet! What is your gamertag? I will add you!

Mine is Hydra HH

xbox360 gamertag - Talibandann

im not on much tho, but i do play MW2 and prob FF13 soon.

[zerox]

FF 13 kicks ass, very addicting, Have over 30 hours into it and not even close to being done the game lol

[zerox]

Originally Posted by Xstunter

Hahahah! that is awsome. I am getting the 3M done at this moment, should be done by the end of the day.

can't wait to see the pics of ur WRX, i like those cars.

btw - Mass Effect 2 kicks ass, beat that game about 2 weeks ago, as a vanguard on hard.

Please let us know how it went. Is this stuff easy to remove? Say it starts to yellow in a few years, can it be removed easily or is it a nightmare? I want to get my front bumper and rockers done. Does Ziebart tint windows

[TheCaptain]

Originally Posted by zerox

Please let us know how it went. Is this stuff easy to remove? Say it starts to yellow in a few years, can it be removed easily or is it a nightmare? I want to get my front bumper and rockers done. Does Ziebart tint windows

It does not yellow, vehicle detailer is this stuff's friend. Removes bugs and grease like nothing off of it. Removed easily? I'm told it is... i had it on my old Cobalt SS for 3 years with no problems.

I love Mass Effect... SO MUCH! I went through as a soldier on medium, am trying a engineer on hard, and a soldier on insane right now. Progress is real slow on insane... like i want to shoot myself type slow!

FF13 is pretty darn good. And i'm not a final fantasy fan. But i think it's mostly a one time playthrough type game since nothing seems to have the ability to change... and it's eating a lot of time that i should be playing ME2 and Forza 3...

LAZRSS - mostly GTA 4, Forza 3, little bit of ODST/Halo

[Xstunter]

I got the clearbra installed by Ziebart on Fri.

The job looks like it was done ok... I asked if they could cut around the vinyl stripes, but said they could not, would only apply it right over them, so I went with it anyway. At the moment there is a bit of air and moisture under certain places of the clearbra, most notably right around the edges of the vinyl stripes, but apparently this will dissipate over time... so we will see.

The other issue I had was that I asked the installer to claybar the area where the clearbra was installed, and she said she would. After i picked up the car, it doesnt look like she did... I can see a bit of very small shit still on the white stripes(small but noticable to me), so I highly doubt she claybarred them... they did clean the area well, but i dont think the claybar was used as I asked... I will post some pics when it is light out so you guys can see what I mean.

But other than that, it looks good, got the fender flairs done as well, and it looks allright.

I was told that it will not yellow or go opaque over time, and I hear it is easy to remove, but this is the first vehicle I have had done, so I have no previous experience. And Ziebart does tint windows, they will even do limo tint on the front driver and passanger windows even tho it is illegal in Sask, it costs about 300-400$ to get all the windows done, depending on if you get a sedan or coupe done.

[zerox]

Originally Posted by Xstunter

I got the clearbra installed by Ziebart on Fri.

The job looks like it was done ok... I asked if they could cut around the vinyl stripes, but said they could not, would only apply it right over them, so I went with it anyway. At the moment there is a bit of air and moisture under certain places of the clearbra, most notably right around the edges of the vinyl stripes, but apparently this will dissipate over time... so we will see.

The other issue I had was that I asked the installer to claybar the area where the clearbra was installed, and she said she would. After i picked up the car, it doesnt look like she did... I can see a bit of very small shit still on the white stripes(small but noticable to me), so I highly doubt she claybarred them... they did clean the area well, but i dont think the claybar was used as I asked... I will post some pics when it is light out so you guys can see what I mean.

But other than that, it looks good, got the fender flairs done as well, and it looks allright.

I was told that it will not yellow or go opaque over time, and I hear it is easy to remove, but this is the first vehicle I have had done, so I have no previous experience. And Ziebart does tint windows, they will even do limo tint on the front driver and passanger windows even tho it is illegal in Sask, it costs about 300-400$ to get all the windows done, depending on if you get a sedan or coupe done.

Thanks for the detailed answer I wanna see your car before I decide what to do. I definately am getting windows tinted first. And I am not gonna chance tinting my passenger windows, even though I really want to, as I know the cops will hound me, hell im sure they will hound me once they see me driving it. No way a cop will let us go with tint on a 45,000 car lol.

[CAFPilot]

Originally Posted by wylde1

But I"m the only black w/ orange stripe ss they've delivered from that dealership!!!.... so if you order that combo I'll we'll have some words haha

The first Camaro SMP recieved was my black 2SS, I was #3 on the list but it ended up being #1 in delivery. So due to a prior agreement it had to stay in the showroom for the 1st week last summer.



When I finally got it home:


Oh the road to the Helena Montana airshow:

[TheCaptain]

Well, i was going to wash and take pics today, but it rained earlier and made a bit of a mess. Maybe tomorrow.

[wylde1]

Originally Posted by CAFPilot

The first Camaro SMP recieved was my black 2SS, I was #3 on the list but it ended up being #1 in delivery. So due to a prior agreement it had to stay in the showroom for the 1st week last summer.



When I finally got it home:


Oh the road to the Helena Montana airshow:

Beautiful car man ... wish I had one just like it... WAIT I DO!!!!


Those buggers lied! haha oh well still, 1 of 2 ain't bad. Although, technically we're still different because mines a 1SS with no RS or sunroof. So i'm back to a 1 of! haha

[wylde1]

Where are you sask guys getting parts from?

I am pretty set on a Borla ATAK cat back this summer, and I can't get anyone in stoon to give me a damn price. I'd rather not really go through PP again, done that in the past with engine builds and I havn't been super impressed with those guys.