NEED AN EXTERNAL DUST BOOT - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BC 2010 · 04-07-2010, 08:21 PM

I am looking for an external dust boot for TR 6060, the boot that is pushed back during shifter replacement.
Mine is missing (long story) and the GM dealer (and wrecking yards will sell me the shifting assembly with dust boot for about $450.

I did my own ater-market shifting boot and it works great, but is rubbing against the drive shaft.
I just need the EXTERNAL dust boot.

The shifting assembly, I assume is made by GM. If anyone knows who makes the shifting assembly for GM, maybe you can provide a website, phone number or name...any information on who would sell it seperately?

Thanks

SSMickey · 04-07-2010, 11:38 PM

I found a listing at www.gmpartsdirect.com for the manual shifter and components. It does not show a picture but a phone call to them might help. Open the Camaro catalog and click on "console", "center console", "shifter", "6.2liter". It's kinda hidden in there. You would think it would be listed under the trans. Anyway, your cost is $116.94. Hope that helps. Did your boot get caugt by the drive shaft?

BC 2010 · 04-09-2010, 11:58 AM

Thank you for info, I place my order. I think it did get caught by the drive shaft not much
clearance.Was looking for thumping noise, probably it wasnot secure. Thanks again

04-07-2010, 08:21 PM	#1
BC 2010 BC 2010 Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009 Location: Santa Barbara, CA Posts: 232	NEED AN EXTERNAL DUST BOOT I am looking for an external dust boot for TR 6060, the boot that is pushed back during shifter replacement. Mine is missing (long story) and the GM dealer (and wrecking yards will sell me the shifting assembly with dust boot for about $450. I did my own ater-market shifting boot and it works great, but is rubbing against the drive shaft. I just need the EXTERNAL dust boot. The shifting assembly, I assume is made by GM. If anyone knows who makes the shifting assembly for GM, maybe you can provide a website, phone number or name...any information on who would sell it seperately? Thanks

04-07-2010, 11:38 PM	#2
SSMickey Drives: 2010 IBM 2SS Join Date: Feb 2010 Location: Columbia S.C. Posts: 1,455 View My Garage	I found a listing at www.gmpartsdirect.com for the manual shifter and components. It does not show a picture but a phone call to them might help. Open the Camaro catalog and click on "console", "center console", "shifter", "6.2liter". It's kinda hidden in there. You would think it would be listed under the trans. Anyway, your cost is $116.94. Hope that helps. Did your boot get caugt by the drive shaft? __________________ ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Hurst Short Throw Shifter Install - Pix and Video	TAG UR IT	Camaro DIY & HOW-TO instructions & discussions	121	02-26-2015 11:08 AM
TAG's 2010 THRSS #2	TAG UR IT	Member Car Journals	3129	08-14-2014 10:29 AM
Clutch fluid contamination problems on Vette fixed for Camaro???	LDGn63	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	11	05-28-2012 10:17 PM
External Dust Boot??	BC 2010	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	0	04-06-2010 12:23 AM
hurst shifter/ dust cover boot	XTREMESS	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	6	10-08-2009 01:09 PM

04-09-2010, 11:58 AM	#3
BC 2010 BC 2010 Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009 Location: Santa Barbara, CA Posts: 232	Thank you for info, I place my order. I think it did get caught by the drive shaft not much clearance.Was looking for thumping noise, probably it wasnot secure. Thanks again