ordered pypes catback exahust... - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SShift · 04-15-2010, 09:27 PM

Look at the welds, the polished tubing, the flanges and there pricing.

b20 · 04-15-2010, 09:59 PM

Quote:

Originally Posted by SShift

Its back ordered because it takes a long time to ship from there factory in china.

i put one on today CHINA ALL THE WAY

fits like crap
pipes marked for wrong places
miss matched clamps
had to call there tech line and was told just take heat shield and chassie brace off and trough it away
still rattles by the trans tunnel

buyer beware

Ivan @ Southwest Speed · 04-15-2010, 10:02 PM

Doug Thorley...proudly MADE IN THE USA by Americans!!

Show Quality welds and Ceramic Coating outside AND inside!

Who wants a thread hijack picture???
-Ivan

jdnick · 04-16-2010, 07:35 AM

Quote:

Originally Posted by SShift

Its back ordered because it takes a long time to ship from there factory in china.

Ordered from LMPerformance and told would not ship until mid-June.

OLD52 · 04-16-2010, 09:31 AM

Yates Performance,they also have systems for sale on E-Bay if anybody's interested

hambone3441 · 04-16-2010, 03:54 PM

Quote:

Originally Posted by b20

i put one on today CHINA ALL THE WAY

fits like crap
pipes marked for wrong places
miss matched clamps
had to call there tech line and was told just take heat shield and chassie brace off and trough it away
still rattles by the trans tunnel

buyer beware

So your not happy with yours? I have yet to install mine....should I not install it?

wbt · 04-17-2010, 02:24 AM

Quote:

Originally Posted by hambone3441

So your not happy with yours? I have yet to install mine....should I not install it?

Just because one person has a bad experience does not mean you will. Don't be so influenced. Take that exhaust by the balls and install it. Worst thing that can happen is you don't like it and put the stock one back on.

No offense but I have to wonder where all the indecisive people in this country are coming from.

"Just do it!"

Ivan @ Southwest Speed · 04-17-2010, 02:35 AM

Quote:

Originally Posted by wbt

Just because one person has a bad experience does not mean you will. Don't be so influenced. Take that exhaust by the balls and install it. Worst thing that can happen is you don't like it and put the stock one back on.

No offense but I have to wonder where all the indecisive people in this country are coming from.

"Just do it!"

HAHA! I love it. Very nicely stated.

Indeed, try it for yourself. I guarantee that there are people who run right out and get Kooks and ARH's or the likes....get em, and bam...not their cup of tea.

WBT is right, sometimes everybody likes something that others do not.

For me, I enjoy buying something and getting a little geeked about it only to find out that it's actually way better than I expected.

That's satisfaction!
-Ivan

hambone3441 · 04-17-2010, 08:06 AM

Quote:

Originally Posted by wbt

Just because one person has a bad experience does not mean you will. Don't be so influenced. Take that exhaust by the balls and install it. Worst thing that can happen is you don't like it and put the stock one back on.

No offense but I have to wonder where all the indecisive people in this country are coming from.

"Just do it!"

I know, I know.....I just dont want to install this thing, be totally unsatisfied and then not be able to return it and be out the $$$. But will probably give it a shot anyways. thanks for the input
Rob

Oldrocker · 04-17-2010, 02:03 PM

I purchased and installed the Pypes on mine. The fit is sub par, the hanger on my left pipe is welded on upside down, the muffler wouldn't fit without spacing the brace, and the left pipe isn't and can't be centered no mater how I put it. But for the price I didn't expect perfection. The sound is nice and I like the system, so I can live with the imperfections.

hambone3441 · 04-17-2010, 02:14 PM

Well I got my system on.....Pics to follow. I think I got everything centered and looking good. I can see the areas where problems can arise but was able to get everything installed and didnt have to modify the pipes at all.

hambone3441 · 04-17-2010, 02:25 PM

pics

hambone3441 · 04-17-2010, 02:29 PM

pics2

b20 · 04-17-2010, 04:02 PM

MINE MUST BE PUT TOGETHER WRONG
my xpipe is no where near a flat as yours
the xsection on mine has 1.5 inch bend in it

04-17-2010, 02:25 PM	#26
hambone3441 Drives: 2010 Camaro 2SS/M6 Rally Yellow Join Date: Dec 2009 Location: St Marys, GA Posts: 37 View My Garage	pics Attached Images

04-17-2010, 02:29 PM	#27
hambone3441 Drives: 2010 Camaro 2SS/M6 Rally Yellow Join Date: Dec 2009 Location: St Marys, GA Posts: 37 View My Garage	pics2 Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installed 3in JBA catback: Evaluation	g-townmach	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	16	11-24-2015 10:29 AM
I specially ordered a Z28! (unlike all of you)	496BIGBLOCK	Camaro ZL1 Forum - ZL1 Specific Topics	70	01-02-2011 02:44 PM
Is anyone running the B&B catback yet??	g-townmach	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	2	12-06-2009 10:24 PM
Options that were not available when I ordered my Camaro SS/RS.	OHIOSS	5th Gen Camaro SS LS LT General Discussions	7	10-01-2009 06:22 PM
Who's ordered, moved posts. CLOSED	zq8colorado04	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	112	01-05-2009 03:21 PM

04-15-2010, 09:27 PM	#15
SShift Drives: Only Bowties! Join Date: Jan 2009 Location: Depths of Hell Posts: 154	Look at the welds, the polished tubing, the flanges and there pricing.

04-15-2010, 10:02 PM	#17
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,161	Doug Thorley...proudly MADE IN THE USA by Americans!! Show Quality welds and Ceramic Coating outside AND inside! Who wants a thread hijack picture??? -Ivan

04-16-2010, 09:31 AM	#19
OLD52 Drives: 2010 CAMARO 1SS RALLEY YELLOW Join Date: Jan 2010 Location: PINELLAS PARK,FLA. Posts: 19	Yates Performance,they also have systems for sale on E-Bay if anybody's interested

04-17-2010, 02:03 PM	#24
Oldrocker Drives: 2010 SS2/RS Victory Red Join Date: Jul 2009 Location: Here and Now Posts: 387	I purchased and installed the Pypes on mine. The fit is sub par, the hanger on my left pipe is welded on upside down, the muffler wouldn't fit without spacing the brace, and the left pipe isn't and can't be centered no mater how I put it. But for the price I didn't expect perfection. The sound is nice and I like the system, so I can live with the imperfections.

04-17-2010, 02:14 PM	#25
hambone3441 Drives: 2010 Camaro 2SS/M6 Rally Yellow Join Date: Dec 2009 Location: St Marys, GA Posts: 37 View My Garage	Well I got my system on.....Pics to follow. I think I got everything centered and looking good. I can see the areas where problems can arise but was able to get everything installed and didnt have to modify the pipes at all.

04-17-2010, 04:02 PM	#28
b20 Drives: 2013 1LE RS 1SS Join Date: Apr 2009 Location: barberton ohio Posts: 320	MINE MUST BE PUT TOGETHER WRONG my xpipe is no where near a flat as yours the xsection on mine has 1.5 inch bend in it